Tom's Hardware > Forum > General Networking > General Gateways, Routers and Firewalls > MN-700 Alternative Firmware
Ask the community Add a reply
Word :    Username :           
 
Anonymous   02-22-2005 at 06:06:11 PM

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

 

If microsoft is not to update the firmware to fix a few
bugs, an alternative firmware solution should be looked
at. I've been researching this, and some people have
successfully flashed it with another linux firmware using
the JTAG port. Is there a manual update in the online
setup, or any ideas of how to update using another
firmware without the JTAG!

Add a reply
Sponsored Links
Register or log in to remove.
Anonymous   02-22-2005 at 09:11:16 PM
- 0 +

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

 

An Alternative Firmware is the only way you'll ever see the bugs fixed on
this POS.


"Brandon" <altosaxman@gmail.com> wrote in message
news:013c01c51919$f49ace30$a401280a@phx.gbl...
> If microsoft is not to update the firmware to fix a few
> bugs, an alternative firmware solution should be looked
> at. I've been researching this, and some people have
> successfully flashed it with another linux firmware using
> the JTAG port. Is there a manual update in the online
> setup, or any ideas of how to update using another
> firmware without the JTAG!

Reply to Anonymous
Anonymous   02-22-2005 at 09:11:17 PM
- 0 +

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

 

It maybe a realality soon enough! Just you gotta use
JTAG:(
>-----Original Message-----
>An Alternative Firmware is the only way you'll ever see
the bugs fixed on
>this POS.
>
>
>"Brandon" <altosaxman@gmail.com> wrote in message
>news:013c01c51919$f49ace30$a401280a@phx.gbl...
>> If microsoft is not to update the firmware to fix a few
>> bugs, an alternative firmware solution should be looked
>> at. I've been researching this, and some people have
>> successfully flashed it with another linux firmware
using
>> the JTAG port. Is there a manual update in the online
>> setup, or any ideas of how to update using another
>> firmware without the JTAG!
>
>
>.
>

Reply to Anonymous
Anonymous   02-22-2005 at 08:57:58 PM
- 0 +

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

 

The Asus WL500G firmware has been flashed on this unit
(customized). They have to use JTAG, and cannot soft
flash it because no one knows how to. To flash to this
totaly new firmware from Windows CE is a mystery to us.
Someone claims "The only problem is that MS loader uses
192k of flash, while we're using 256k, so I'm not sure if
MS firmware will accept larger loader image (this is the
only part which needs to written, once done it will flash
firmware itself)." Perhaps someone can shed light on
this, maybe even microsoft!!! Help support the
continuous life for this product, we paid good money for
it!
>-----Original Message-----
>If microsoft is not to update the firmware to fix a few
>bugs, an alternative firmware solution should be looked
>at. I've been researching this, and some people have
>successfully flashed it with another linux firmware
using
>the JTAG port. Is there a manual update in the online
>setup, or any ideas of how to update using another
>firmware without the JTAG!
>.
>

Reply to Anonymous
Anonymous   02-22-2005 at 09:41:12 PM
- 0 +

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

 

Think if we ask MS to provide a firmware that did...
"As far as software flashing goes, the original CE
firmware code will have to be hacked to enble flashing of
non-validated firmwares (eg a file named poop.bin, etc)
and then that has to be flashed to the router before
flashing custom firmwares. If a well trained hack gets
around to it..."
>-----Original Message-----
>If microsoft is not to update the firmware to fix a few
>bugs, an alternative firmware solution should be looked
>at. I've been researching this, and some people have
>successfully flashed it with another linux firmware
using
>the JTAG port. Is there a manual update in the online
>setup, or any ideas of how to update using another
>firmware without the JTAG!
>.
>

Reply to Anonymous
Ask the community Add a reply
Tom's Hardware > Forum > General Networking > General Gateways, Routers and Firewalls > MN-700 Alternative Firmware
Go to:

There are 1233 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.171 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
How do I win badges?