HP DV9000 hinge replacement

hope this could help you see page 3.20 http://h10032.www1.hp.com/ctg/Manual/c01311536.pdf

I just ran into the same problem....After fixing the left hinge and while reassembling I noticed the right hinge seemed a little "wobbly",and so having a new right hinge I finally found the solution to installjng;
Good News!---Just turn the laptop over and you will see the two screws easly accessable right under the hinge (of course you have to remove the top screw holding the plastic cover in place and the other screws the same as the left side).

At least that's the way mine is ----it's a DV9207us-----Hope this will solve the problem,Good luck!

does not till or show me where the screws are to remove/replace

look under section 3.3 parts 2 is the inside hinge bar from the panel you could see screw holes in it with the magnifier and parts 6 is the hinge cover

look at this one got more details http://h10032.www1.hp.com/ctg/Manual/c01311536.pdf

and this on you tube http://www.youtube.com/watch?v=kL0SypUrx9Q