Hey guys,i'm disperated. I've done a format two weeks ago for some crashes and it seems to be good.. but in this week i've two crashes.. one of this few time ago. So i haven't the debuggin tools so I sent you the crash minidump. Can you analyze and help me to resolve this problem?
The MEMORY_MANAGEMENT bug check has a value of 0x0000001A. This indicates that a severe memory management error occurred.
This is usually triggered by bad drivers, or faulty RAM. Update all of the major drivers (Video, Audio, Network, and Chipset) and see if it continues. If so, download and burn a copy of MemTest86+ and test your RAM. Let it run overnight and see if any errors are shown.
You're certain all 4 of those drivers I mentioned are up to date? How did you check?
I've controlled on gigabyte website and my drivers are the latest released. And also on Amd website my videocards drivers are the latest.. I dunno what can be.. I wrote also on corsair official support forum for rams and i'm waitin' of an answer.. I will also reinstall the driver. I will update you soon!
Just throwing something out there, since the dump file picks up on a memory error.
Are your ram voltages and timings set correctly for your ram in your bios?
Its not unusual for a mobo's "auto" settings to be off somewhat, although 99 percent of the time they default to a lower spec with looser timings to play safe.
Very slight possibility of this being the problem but worth checking none the less.
On the corsair page the voltage and timing are the same to my stettings. From Yesterday,that i've flashed bios,i haven't BSOD. So probably i've fixed it with flashing,if i have some BSOD i will write here again,ok?
Same error code as before. Perhaps you should try relaxing the timings on your ram? Not sure what they are right now, but for example, if they are set to 7-7-7-20, try setting them to 8-8-8-21 or 9-9-9-24. Leave the voltage as-is for now, and never leave it over 1.65V. Prolonged usage at that voltage can damage the memory controller inside your i7 CPU.