Tom's Hardware > Forum > Graphic & Displays > Graphics Cards > Low 3d Mark '03 with 9800 pro

Low 3d Mark '03 with 9800 pro

Forum Graphic & Displays : Graphics Cards - Low 3d Mark '03 with 9800 pro

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Darkmatterx   07-12-2003 at 02:52:54 AM

I made a post in cpu but nobody seems to be replying so I thought I'd try here.

I have a new system and I am only getting 4500+ in 3d mark 03.

I have a P4 3gz 800 fsb, abit IC7 mb, 1024Twinx Corsair PC3200 Ram, Radeon 9800 Pro. Nothing OC'd yet.

I've updated all drivers and mb bios and I have disabled unused Winxp Pro services.

Got a couple specific questions.

Should I use the rage3d tweaker for the card or powerstrip?

If I disable powerstrip or 3drage will it still lock refreshrates or will windows set them back to 60 when I run a game?

If I OC my vid card what range should I try, and should I just OC the vid chip or the ram also? If yes to both, should I keep them at a certain ratio to eachother?

My BIOS has a few functions that I don't know about and 1 that I can't get to work right. All are set to AUTO right now.

Game Accelerator (When I set this to F1 I get a BIOS Checksum Error and I need to clear my Cmos)

Refresh Cycle TIme

Read Delay (tRD)
Read Delay Adjust (tRDA)
Command Per Clock (CPC)

What should I do with these? Also why can't I use F1 for Game accelerator? I have a good system with good parts...

My current memory timings are 2.5, 6, 3, 2

Thanks for any advice on how to improve my system. :)

Add a reply
Sponsored Links
Register or log in to remove.
Darkmatterx   07-12-2003 at 06:55:57 PM
- 0 +

Ok I found out from corsair forums that i needed to up my voltage a bit.

I still need to know how I should be OC'd my 9800pro. Do I raise the clock and memory the same ammount? Do I leave the memory alone? How much? etc etc

Also, once I've set the OC timing, can I close powerstrip or do I need to keep it running?

I also still dunno what to do about most of the settings in my first post

Reply to Darkmatterx
speeduk   07-12-2003 at 08:39:16 PM
- 0 +

You have a 3gig p4 and a 9800pro. At stock speeds you should get 5200+ in 3dm03. And you shouldnt need to up the agp voltage any if your motherboard is recent and has the latest bios. Sort out the stock problem before overclocking

<A HREF="http://service.futuremark.com/compare?2k1=6719742" target="_new"> MY RIG </A>
<A HREF="http://service.futuremark.com/compare?2k3=996846" target="_new"> 3D-03 </A>
<font color=red> 120% overclocker </font color=red> (cheapskate)

Reply to speeduk
speeduk   07-12-2003 at 08:41:09 PM
- 0 +

Can you post a link to your 3dmark03 score please???

<A HREF="http://service.futuremark.com/compare?2k1=6719742" target="_new"> MY RIG </A>
<A HREF="http://service.futuremark.com/compare?2k3=996846" target="_new"> 3D-03 </A>
<font color=red> 120% overclocker </font color=red> (cheapskate)

Reply to speeduk
Ask the community Add a reply
Tom's Hardware > Forum > Graphic & Displays > Graphics Cards > Low 3d Mark '03 with 9800 pro
Go to:

There are 980 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.103 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
How do I win badges?