Sign in with
Sign up | Sign in
Your question

3d marks 2001se

Tags:
  • Graphics Cards
  • RAM
  • 3D
  • Radeon
  • Graphics
Last response: in Graphics & Displays
Share
July 26, 2003 10:17:19 PM

What type of scores would you expect for 3d mark 2001se?

Configured at: P4 2600, 1.5 gig ram (2700), Radeon 9800pro 128meg,.....

More about : marks 2001se

July 26, 2003 11:09:37 PM

16000 or higher?
July 27, 2003 4:52:11 AM

Post your points on the basis of the beautiful combination !!

CPU Pentium VI 2.66GHz
Mainboard MSI 865PE Neo2 - LS
Video Card Leadtek A280 Le TD DDR 256MB
Hard Disk Maxtor DiamandMax9 80GB Buffer 8MB & W.D. 40GB Buffer 8MB
Related resources
July 27, 2003 1:44:41 PM

cpu: P4 2.6 HT
Ram: 1.5 gig (2700)
Video: Radeon 9800 Pro 128 meg (Not overclocked)

3Dmark 2001se 15399

How can I increase this? Most other people with the same configuration are getting in the 17000-19000 range...
July 28, 2003 2:09:32 AM

I have a Asuz p4sd-la board Intel chipset.. How can I tell witch p4 I have>?
July 28, 2003 2:39:47 AM

use WCPUID..
or go into bios, check whether if your FSB is 200Mhz or 133Mhz
200Mhz=C
133Mhz=B
July 28, 2003 3:33:15 AM

It would be c...
July 28, 2003 3:52:55 AM

At what speed is your memory running? I see you have PC2700. Ideally, you should have two identical modules of PC3200 RAM running at 200 Mhz in dual channel mode.
July 28, 2003 5:29:53 AM

if it's C, then even without dual channel, it's still a better idea to use PC3200 with 200MhzFSB
!