Sign in with
Sign up | Sign in
Your question

Wireless portion of MN500 dead

Last response: in Networking
Share
March 21, 2005 11:11:36 PM

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

I have been having trouble with my MN500 today. I can
connect using my wired ports but my wireless network is
no longer visible from any of my wireless systems. Is
there a way to determine whether or not the wireless
portion of the AP is dead?

I can see all the other wireless networks in the
neighborhood except mine.
Anonymous
a b F Wireless
March 22, 2005 12:20:50 AM

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

There is a setting to turn wireless on or off. I would
check that right away. It's under "wireless" check to
enable then check all other setting including SSID and CH#,
last but not least WEP key.

Joe
>-----Original Message-----
>I have been having trouble with my MN500 today. I can
>connect using my wired ports but my wireless network is
>no longer visible from any of my wireless systems. Is
>there a way to determine whether or not the wireless
>portion of the AP is dead?
>
>I can see all the other wireless networks in the
>neighborhood except mine.
>.
>
Anonymous
a b F Wireless
March 22, 2005 9:44:22 PM

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

I have wireless enabled and security disabled at this
point. Thanks for the check points, though.
>-----Original Message-----
>There is a setting to turn wireless on or off. I would
>check that right away. It's under "wireless" check to
>enable then check all other setting including SSID and
CH#,
>last but not least WEP key.
>
>Joe
>>-----Original Message-----
>>I have been having trouble with my MN500 today. I can
>>connect using my wired ports but my wireless network is
>>no longer visible from any of my wireless systems. Is
>>there a way to determine whether or not the wireless
>>portion of the AP is dead?
>>
>>I can see all the other wireless networks in the
>>neighborhood except mine.
>>.
>>
>.
>
Related resources
Anonymous
a b F Wireless
March 23, 2005 11:20:21 AM

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

The system came back alive last night for about an hour
and then sputtered out. Sputtered as in it was there for
a minute, then disappeared, then returned for a
minute...for about 5 or six cycles. Now it is gone
again. Something like an intermittent connection. My
wired connections from the hub don't do this. What in
the world is going on with this thing!

Any help is greatly appreciated.

TomL

>-----Original Message-----
>I have been having trouble with my MN500 today. I can
>connect using my wired ports but my wireless network is
>no longer visible from any of my wireless systems. Is
>there a way to determine whether or not the wireless
>portion of the AP is dead?
>
>I can see all the other wireless networks in the
>neighborhood except mine.
>.
>
Anonymous
a b F Wireless
March 24, 2005 2:38:19 AM

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

I am experiencing the same problem since Monday, March
21. The wireless networting was working fine for the
past 3 years, and it just suddenly stopped working.

Does disabling security keep you connected wireless?

>-----Original Message-----
>I have wireless enabled and security disabled at this
>point. Thanks for the check points, though.
>>-----Original Message-----
>>There is a setting to turn wireless on or off. I would
>>check that right away. It's under "wireless" check to
>>enable then check all other setting including SSID and
>CH#,
>>last but not least WEP key.
>>
>>Joe
>>>-----Original Message-----
>>>I have been having trouble with my MN500 today. I can
>>>connect using my wired ports but my wireless network
is
>>>no longer visible from any of my wireless systems. Is
>>>there a way to determine whether or not the wireless
>>>portion of the AP is dead?
>>>
>>>I can see all the other wireless networks in the
>>>neighborhood except mine.
>>>.
>>>
>>.
>>
>.
>
March 28, 2005 9:35:11 PM

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Did you reset the router? I experienced the same problem with a friend
MN500. I completely reset the router and re-entered the settings and all
was well.

Later,

Randy


"TomL" <anonymous@discussions.microsoft.com> wrote in message
news:251201c52e95$3d3bef30$a401280a@phx.gbl...
>I have been having trouble with my MN500 today. I can
> connect using my wired ports but my wireless network is
> no longer visible from any of my wireless systems. Is
> there a way to determine whether or not the wireless
> portion of the AP is dead?
>
> I can see all the other wireless networks in the
> neighborhood except mine.
!