Archived from groups: alt.os.linux.redhat,comp.sys.palmtops,comp.sys.palmtops.pilot (More info?)

I can't get gpilot to work on FC3 with a 2.6.11.5 kernel. I've done the
following, Created  
 
/etc/udev/permissions.d/10-visor.permissions  
ttyUSB1:$local:uucp:0660  
 
/etc/udev/rules.d/1--visor.rules KERNEL="ttyUSB1"
SYMLINK="pilot"  
 
Under Evolution I've brought up pilot settings, selected
/dev/pilot (I've also tried /dev/ttyUSB1), hit the hot sync button on the
cable, and then tried to do an initial sync. Nothing happens. The kernel
sees the Treo,
 
Jul 15 10:34:48 ranger kernel: usb 2-2: new full speed USB device using ohci_hcd and address 6
Jul 15 10:34:48 ranger kernel: visor 2-2:1.0: Handspring Visor / Palm OS converter detected
Jul 15 10:34:48 ranger kernel: usb 2-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
Jul 15 10:34:48 ranger kernel: usb 2-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
Jul 15 10:34:48 ranger hald[4113]: Timed out waiting for hotplug event
752. Rebasing to 753

Archived from groups: alt.os.linux.redhat,comp.sys.palmtops,comp.sys.palmtops.pilot (More info?)

On Fri, 15 Jul 2005, at 10:46:51 [GMT -0400] (00:46:51 Saturday, 16 July
2005 where I live) "General Schvantzkoph" wrote:
 
> I can't get gpilot to work on FC3 with a 2.6.11.5 kernel. I've done the
> following,
 
Might be better of posting to a Linux ng?  Look for one for the Linux
version you are using.
 
--  
We are Pentium of Borg. Division is futile. You will be approximated.