system configuartion

[noname]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

I just changed the mouse on my Pentium II and started getting an errror
message 'Inbvalid system configuration data- run configuration utility'
thanks for any help.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Select Start, Control, Panel, System, Hardware, Device Manager, Mouse
and other pointing devices, right click on Mouse and select Properties.
What does it say in the Device Status box? Any error code?

--


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Using invalid email address

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
Please tell the newsgroup how any
suggested solution worked for you.

http://dts-l.org/goodpost.htm

~~~~~~~~~~~~~~~~~~~~~~~~


"noname" <noname@discussions.microsoft.com> wrote in message
news:8B5A81CF-5DF1-4FFE-81E3-9F65202BB98F@microsoft.com...
>I just changed the mouse on my Pentium II and started getting an errror
> message 'Inbvalid system configuration data- run configuration
> utility'
> thanks for any help.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

My problem is with my System Configuration recognizing my monitor. When it was
initially configured, I'm not sure that the tech used the Samsung disc that came
with the monitor or a generic set of drivers (since the monitor was purchased
separately) but when I go to Control, Panel, System, Hardware, Device Manager,
Monitors, then right click on "Monitors", all I see is "Plug and Play Monitor"
instead of "Samsung 913V". The monitor works fine but I'm curious if all the
correct driver(s) is (are) installed. Under Properties>Details, it shows the
Samsung ID, but not the model. Suggestions, please!

Bill

On Wed, 23 Mar 2005 18:44:20 -0000, "Gerry Cornell" <gcjc@tenretnitb.com> wrote:

>Select Start, Control, Panel, System, Hardware, Device Manager, Mouse
>and other pointing devices, right click on Mouse and select Properties.
>What does it say in the Device Status box? Any error code?

 

[noname]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

but how can I do it when computer doesn't start?

> Select Start, Control, Panel, System, Hardware, Device Manager, Mouse
> and other pointing devices, right click on Mouse and select Properties.
> What does it say in the Device Status box? Any error code?
>
> --
>
>
> Hope this helps.
>
> Gerry
> ~~~~~~~~~~~~~~~~~~~~~~~~
> FCA
>
> Using invalid email address
>
> Stourport, Worcs, England
> Enquire, plan and execute.
> ~~~~~~~~~~~~~~~~~~~~~~~~
> Please tell the newsgroup how any
> suggested solution worked for you.
>
> http://dts-l.org/goodpost.htm
>
> ~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> "noname" <noname@discussions.microsoft.com> wrote in message
> news:8B5A81CF-5DF1-4FFE-81E3-9F65202BB98F@microsoft.com...
> >I just changed the mouse on my Pentium II and started getting an errror
> > message 'Inbvalid system configuration data- run configuration
> > utility'
> > thanks for any help.
>
>

 

[noname]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

with error message i also see follwing
press F1 for help, F2 for setup. I went to setup, tried changing everything
one by one but no success. One thing strange also happens when I tried to
boot with the help of XP CD, computer started telling me about windows98.

 

[noname]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Perhaps there is now no solution to problem. should i try to format hard
drive and reinstall windows xp as nothing worse than present can occur. if so
how can i format hard drive? thanks