problems with 9500 pro Graphiccard

[Brainlord]

I have a 9500 pro Graphic-card.
Since I installed a new driver, the pc broke down when I play CS or 3d Mark 03.

The error text is:

//
// Watchdog Event Log File
//

LogType: Watchdog
Created: 2002-11-06 15:00:00
TimeZone: -60 - Westeuropäische Normalzeit
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver

//
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
//

ShutdownCount: 76
Shutdown: 0
EventCount: 6
BreakCount: 6
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: HERCULES 3D PROPHET 9500 PRO
HardwareID: PCI\VEN_1002&DEV_4E45&SUBSYS_00021681&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A1904 0006000E 000A1904 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6404
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2


What can I do?
I have already tested several drivers.(OMEGA,CATALYST and THE DRIVER FROM THE BUNDLE)

Please answer in German or Englisch.

 

[cleeve]

Could be a heat problem. I have had them manifest like this before.

Take off the side of your computer case, blow a fan on the mobo during the test, and see if the error occurs.

________________
<b>Radeon <font color=red>9500 PRO</b></font color=red> <i>(hardmodded 9500, o/c 322/322)</i>
<b>AthlonXP <font color=red>2600+</b></font color=red> <i>(o/c 2400+ w/143Mhz fsb)</i>
<b>3dMark03: <font color=red>4,055</b></font color=red>