Sign in with
Sign up | Sign in
Your question

Problem in Far Cry

  • Graphics Cards
  • Games
  • Graphics
Last response: in Graphics & Displays
February 4, 2004 2:06:54 AM

Ran it at 1024x786 32, settings all at medium. Neat game. But when i tried to use AA, and ran the game, it can load into the game, but i cant see anyhting. the islands flicker in and out of exsistence, in fact everything does.

When i first installed the game and ran it, i was using medium AA and settings on high. it ran but low framerates. (15~20) So i lowered the settings. Anybody encountered the same problem as me?

Overall a nice game, ran smoothly on my system too.

Athlon XP 1800+ 1.52ghz
Gigabyte GA-7VKML
Powercolour R9600pro Bravo @ 480/340
128+256 DDR266
Maxtor 20gb 7200rpm 2mb, WD 40gb 5400rpm 2mb
Creative SB Live! 5.1 Digital

More about : problem cry

February 4, 2004 2:26:32 AM

modded 9500 to 9700np
3.7 drivers

Same thing happened to me... lower your AA... autodetect all settings... play... then change settings one at a time to test it... I have water, environment, and special effects at high and everything else at medium... I forget what AA setting I am using, but it is not off... 1152x864 100Hz

<font color=red><b>To reign is worth ambition though in Hell:
Better to reign in Hell, than serve in Heav'n.</b></font color=red>
John Milton, <i>Paradise Lost</i>, II 262-263
February 4, 2004 9:11:43 AM

I have the same problem.. I play all in very high @ 1024 - 85Hz but when I turn on the AA even in low it happens the same thing to me.. maybe its a radeon issue.. 9800 Pro 128Mb
February 4, 2004 1:07:52 PM

AA doesn't work correctly in Far Cry, it is been reported on Hardocp too.

Asus A7N8X Deluxe, Xp 2500+(3200+), 512MB RAM, HIS Radeon 9500Pro