Sign in with
Sign up | Sign in
Your question

Removing the shim on 9800pro

Tags:
  • Graphics Cards
  • Graphics
Last response: in Graphics & Displays
Share
April 10, 2004 1:50:07 AM

I have a Sapphire R9800pro does anyone know how to remove the shim on this i have tryed to get a knife under it but it seemed to be to thick, any suggestions?

Athlon XP 2800+, ASUS A7N8X-X, 512mb PC2700 DDR
128mb ATI Radeon 9800 Pro (430/385)
3D Mark03 Score <font color=red>6,316</font color=red>

More about : removing shim 9800pro

April 10, 2004 1:59:17 AM

Why do you want to mess with your 9800 Pro???
Related resources
Can't find your answer ? Ask !
a b U Graphics card
April 10, 2004 3:23:05 AM

Why remove the shim?

People usually dremel a recess into their HSFs if they don't fit. Anything else will run a higher risk of damaging your card.


- You need a licence to buy a gun, but they'll sell anyone a stamp <i>(or internet account)</i> ! - <font color=green>RED </font color=green> <font color=red> GREEN</font color=red> GA to SK :evil: 
April 10, 2004 10:53:54 AM

i wanna remove it because its higher then my core so the vga silencer cant touch it

Athlon XP 2800+, ASUS A7N8X-X, 512mb PC2700 DDR
128mb ATI Radeon 9800 Pro (430/385)
3D Mark03 Score <font color=red>6,316</font color=red>
April 10, 2004 6:41:49 PM

An Xacto knife worked for me.

________________
<b>Radeon <font color=red>9500 PRO</b></font color=red> <i>(hardmodded 9500, o/c 322/322)</i>
<b>AthlonXP <font color=red>~2600+</b></font color=red> <i>(o/c 2400+ w/143Mhz fsb)</i>
<b>3dMark03: <font color=red>4,055</b></font color=red>
a b U Graphics card
April 10, 2004 6:59:49 PM

AHHHHHHHHH!

POP

phew ! Sigh.


First time is a scare I bet.

ABIT IS7, P4 2.6C, 512MB Corsair TwinX PC3200LL, Radeon 9800 Pro, Santa Cruz, TruePower 430watt
April 11, 2004 2:06:16 AM

Lol. Great advice Gen.

Me: are you saying I can't provide?
Me: cause I know I can provide.
Me: oh and I can provide money too;)
Rachel:) : why do we need money when we can just stay in our room and have sex all day?
April 11, 2004 3:59:16 AM

well, what I have done and what others here have done at times in the past, is heat up the core. No, I don't mean put it in the microwave, but you can find a 3D game to play and play it for a few hours. After the core is nice and hot, take the "carpet knife"(hehe)and pop that sucker off. The adhesive will lose viscosity and there ya go....
good luck!

-- the Doc

8PENXP(Rev.2)
P4 2.8C@3.4
512mb Mushkin 3500 Level II@472 (2-2-2)
R9800Pro@463/380
WD 80gb(SE)x2(RAID 0)
April 11, 2004 6:32:44 AM

sticking it in a freezer also helps.. its how it got the HSF off my 8500

but condensation can be dangerous, so i dont know how safe this is

-------
<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new">please dont click here! </A>
April 11, 2004 5:38:39 PM

could i use a hairdryer to heat it up, would that be ok?

Athlon XP 2800+, ASUS A7N8X-X, 512mb PC2700 DDR
128mb ATI Radeon 9800 Pro (430/385)
3D Mark03 Score <font color=red>6,316</font color=red>
April 11, 2004 5:49:03 PM

Static Electrisity?

P4c 2.6@3.25
512Mb PC4000
2x120Gb 7200.7 in RAID0
Waterchill KT12-L30
Abit AI7
Ge-Force4 Ti4200
a b U Graphics card
April 11, 2004 5:51:03 PM

friction causes heat, but don't try rubbing it rapidly on the carpet. :tongue:

ABIT IS7, P4 2.6C, 512MB Corsair TwinX PC3200LL, Radeon 9800 Pro, Santa Cruz, TruePower 430watt
April 11, 2004 7:42:51 PM

Yes, use a hair dryer, it is ok.

PIV 2.8 @ 3.57, 2X256 Geil Platinum PC4000 @ 1:1, 255fsb, RBX water cooled, IC7, (2)Raptors in raid 0, BFG5900nu flashed to 5950ultra bios, 500 watt psu.
April 12, 2004 12:42:22 AM

Yup, sticking it in the freezer helps also. You can put it in a ziplock back to help prevent the condensation. I always heat up the core by playing for a while first, then it just pops right off. Of course you could always just do a "GW" and "pop" it off...hehe :tongue:
And don't tell that poor guy to use a hairdryer, he might just do it!...lol
Anyways, good luck man....

-- the Doc

8PENXP(Rev.2)
P4 2.8C@3.4
512mb Mushkin 3500 Level II@472 (2-2-2)
R9800Pro@463/380
WD 80gb(SE)x2(RAID 0)
April 12, 2004 10:55:04 AM

I have used a hair dryer on the low setting to remove many a heatsink and other parts that were epoxied on, and I have had absolutely ZERO problems. So, do whatever feels comfortable for you.
P.S. The cursing is uncalled for. If you feel that the only way to express your unbridled emotions is to use profanity to garner the attention of others, then I seriously doubt that anyone with common sense would submerse themselves in the udder depracation of your comments. If you do not have anyting kind to say, then your are only discrediting yourself. Keep your unwarranted and unwanted comments to yourself.

PIV 2.8 @ 3.57, 2X256 Geil Platinum PC4000 @ 1:1, 255fsb, RBX water cooled, IC7, (2)Raptors in raid 0, BFG5900nu flashed to 5950ultra bios, 500 watt psu.
a b U Graphics card
April 12, 2004 11:42:59 AM

<i>Submersing yourself under the Udder, eh?</i> Too much time on the farm?

<b>Submitting</b> ourselves to the <b>utter</b> priggishness of your comments might lead one to believe that there is no room for any form of <b>deprecation</b> at all, which would be unacceptable in a forum where nimrods and numbnutz abound.

I do agree, however, that we all should, <i>do whatever/whomever feels comfortable...</i>, including telling you to STFU!

Profanity alone does not detract from the wisdom of the words, and those who would discount them for that reason alone are often not as wise as they try to appear. That you couldn't see the truth and sarcasm in his words speaks volumes.

<font color=purple><i>Sarcasm is the only intelligent person's response to irritating stupidity</i></font color=purple> - White

I like that one so much more than your trite proverb.

Hhmmm, I have this overwhelming urge to look up the word <i>pedantic</i> in the dickshunairy, I wonder why? Probably just something I drank. I think I'll go sleep it off. :evil: 


- You need a licence to buy a gun, but they'll sell anyone a stamp <i>(or internet account)</i> ! - <font color=green>RED </font color=green> <font color=red> GREEN</font color=red> GA to SK :evil: 
April 12, 2004 1:00:42 PM

Spare me the rhetoric. It just so happens, Mr. Forum Veteran, that a while ago, I posted a question here about removing epoxied heatsinks. The reply was to use a hair dryer. So, I did, and I never looked back. It has worked for me many time since. Im not saying that there is anything wrong with cursing, at the right time. This is not one of those time. Dont get your panties in a wad. Jeez! Why dont everyone smoke a bowl and calm the F#%K down.

PIV 2.8 @ 3.57, 2X256 Geil Platinum PC4000 @ 1:1, 255fsb, RBX water cooled, IC7, (2)Raptors in raid 0, BFG5900nu flashed to 5950ultra bios, 500 watt psu.
a b U Graphics card
April 12, 2004 1:33:53 PM

Spare me the righteous indignation, Mr. Forum Pr1ck, err.. Member!

You're the one who got all bent out of shape at GW's statements, regardless of your history (like anyone cares).

So take your own advice, go take a toke, take the pickle out of your a$$, and STFU!


- You need a licence to buy a gun, but they'll sell anyone a stamp <i>(or internet account)</i> ! - <font color=green>RED </font color=green> <font color=red> GREEN</font color=red> GA to SK :evil: 
April 12, 2004 6:16:19 PM

Although the hairdryer may have worked for some here, I will tell you that I would not do this. There's a chance you may damage other components on your card...but of course it's what I wouldn't do, it's your choice.
Let us know once you get it off, and what means you used to do so.

-- the Doc

8PENXP(Rev.2)
P4 2.8C@3.4
512mb Mushkin 3500 Level II@472 (2-2-2)
R9800Pro@463/380
WD 80gb(SE)x2(RAID 0)
April 12, 2004 7:22:10 PM

Lol...thank's Grape :wink:

**edit**
I just read his spec's and noticed he's an nVidiot....dont scare him off, he can be Kinney's backup :lol: 


<A HREF="http://rmitz.org/AYB3.swf" target="_new">All your base are belong to us.</A>
<A HREF="http://service.futuremark.com/compare?2k3=2216718" target="_new"><b>3DMark03</b></A>
<P ID="edit"><FONT SIZE=-1><EM>Edited by GeneticWeapon on 04/12/04 03:25 PM.</EM></FONT></P>
April 12, 2004 8:15:45 PM

hahahahahahahahahahahaha, ooohhh, im offended. I see your true colors shining through. You obviously have much to learn. I truly pity you. I am sorry you have such a small penis. People ask for help = bash them for fun. Great forum here guys. Real helpful. To all you other guys who are actually trying to help, thanks and keep up the good work.

PIV 2.8 @ 3.57, 2X256 Geil Platinum PC4000 @ 1:1, 255fsb, RBX water cooled, IC7, (2)Raptors in raid 0, BFG5900nu flashed to 5950ultra bios, 500 watt psu.
a b U Graphics card
April 13, 2004 3:02:24 AM

Sure, yeah, that's it it's all about the penis.

Well, thank you <A HREF="http://www.moviewavs.com/TV_Shows/South_Park/Episode_31..." target="_new">for confirming</A> just who is the bigger Di¢k.

I feel like less of a Pr1ck already.

And remember you weren't asking for help you were simply providing the useless 'yeah do that' response and then bitching about someone else's reply. Don't set the tone if you are unwilling to receive similar treatment you hypocrite!

As for your help, don't give yourself that much credit, you were helpful, but more as an example of what to avoid doing.
See you're not completely useless, you can always serve the purpose of a warning of what not to do in every aspect of this thread.

If we had avitars here, I'd vote that you be assigned <A HREF="http://www.despair.com/mis24x30prin.html" target="_new">this one</A>.

Or perhaps even <A HREF="http://www.despair.com/humiliation.html" target="_new">this one</A>, both would be apt descriptions.

Now go play with your 'big' P3N1$, you Wanker!


- You need a licence to buy a gun, but they'll sell anyone a stamp <i>(or internet account)</i> ! - <font color=green>RED </font color=green> <font color=red> GREEN</font color=red> GA to SK :evil: 
April 13, 2004 4:53:52 AM

hahahahahaha you are so smart! I am just amazed at how brilliant you are. "Wanker"---ingenious. Great forum here, has to be the best in the world.

PIV 2.8 @ 3.57, 2X256 Geil Platinum PC4000 @ 1:1, 255fsb, RBX water cooled, IC7, (2)Raptors in raid 0, BFG5900nu flashed to 5950ultra bios, 500 watt psu.
April 14, 2004 2:50:41 AM

A little off subject, but how many here have put a XT bios on a Pro card?

-- the Doc

8PENXP(Rev.2)
P4 2.8C@3.4
512mb Mushkin 3500 Level II@472 (2-2-2)
R9800Pro@463/380
WD 80gb(SE)x2(RAID 0)
April 14, 2004 3:53:55 AM

what are the result effects Doc?
April 14, 2004 10:30:00 AM

Im running, and Im running, but yet, somehow, I dont seem to go "along".

PIV 2.8 @ 3.57, 2X256 Geil Platinum PC4000 @ 1:1, 255fsb, RBX water cooled, IC7, (2)Raptors in raid 0, BFG5900nu flashed to 5950ultra bios, 500 watt psu.
!