Card temps

[cefoskey]

Anyone currently OCing any radeon 9600 Pros here, what speeds are you clocking to and what temps (die and/or ram) are you seeing from it? Im looking to experiment with my BBA 9600 Pro.

Plus, are the max speeds you could get out of a 9600XT the same max speeds youd get out of a Pro?

"Who is General Failure, and why is he reading my drive?"
P4 3.0 HT, Intel D865GBF, 512MB Crucial PC3200 DDR, WD 36GB Raptor 10,000RPM, BBA Radeon 9600PRO, SB Audigy, Hauppage WinTV

 

[Crashman]

I can get around 500/380(DDR760) out of my AIW 9600 Pro with Samsung 2.86ns memory...under ideal conditions. I run it at 480/365.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[cefoskey]

stock cooling?

"Who is General Failure, and why is he reading my drive?"
P4 3.0 HT, Intel D865GBF, 512MB Crucial PC3200 DDR, WD 36GB Raptor 10,000RPM, BBA Radeon 9600PRO, SB Audigy, Hauppage WinTV

 

[Crashman]

Yes, it did that on stock cooling until I got tired of the noise and put a passive cooler from an old GeForce2 MX on it, then added a low speed 40mm fan to the passive cooler. Now it's quiet. It's always been cool.

My chip would crash when the sink was barely warm, it would have needed a volt mod to go faster or get warmer.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>