TECH: running games with a 44 pin to 36 pin connector

Archived from groups: rec.games.video.arcade.collecting (More info?)

I'm wondering if this could be done or not. If so, how? I have a pacman
that is 44 pins at the edge connector. I'd like to run a Crazy Kong PCB
in this cabinet. However, Crazy Kong is a 36 pin edge connector. Is
there any way to make an adapter that will go from 44 pin to 36 pin
where I could rewire all the inputs on the edge connector?

john

Archived from groups: rec.games.video.arcade.collecting (More info?)

Mark Spaeth makes good connector adapters; he may be a bit abrasive to some
people but the quality of what he sells is excellent

--
Art
"Baraka" <grus_jc@yahoo.com> wrote in message
news:1114165751.165960.254420@o13g2000cwo.googlegroups.com...
>
> I'm wondering if this could be done or not. If so, how? I have a pacman
> that is 44 pins at the edge connector. I'd like to run a Crazy Kong PCB
> in this cabinet. However, Crazy Kong is a 36 pin edge connector. Is
> there any way to make an adapter that will go from 44 pin to 36 pin
> where I could rewire all the inputs on the edge connector?
>
> john
>

Archived from groups: rec.games.video.arcade.collecting (More info?)

Art Mallet - Artfromny - formerly A218@aol.com <artgames@nycap.rr.com> wrote:
: Mark Spaeth makes good connector adapters; he may be a bit abrasive to some
: people but the quality of what he sells is excellent

....except I'm not going to make adapters that for AC pacman to DC boards.


--
Mark Spaeth mspaeth@mtl.mit.edu
50 Vassar St., #38.265 mspaeth@mit.edu
Cambridge, MA 02139
(617) 452-2354 http://rgvac.978.org/~mspaeth