Just thought I would post here so I could get a quick response. I just got my VGA Silencer rev.3 today and I was wondering if someone could tell me if the two rubber spacers on each of the screws are supposed to go with one on each side of the board or both on the back with the bracket? Sorry for the noob question but this is my first time installing a VGA cooler on any card. Thanks in advance.
Xaser 3 case with 420W TT PSU
AXP2500 (11*200 at 1.85v)
9800 Pro 128MB (stock speeds)
NF7-S v2.0
PDP DDR400 1GB(2-3-2-5)2.6v
Lite-On SOHW-832S
WD 80GB 8mb buffer caviar edition.
Xaser 3 case with 420W TT PSU
AXP2500 (11*200 at 1.85v)
9800 Pro 128MB (stock speeds)
NF7-S v2.0
PDP DDR400 1GB(2-3-2-5)2.6v
Lite-On SOHW-832S
WD 80GB 8mb buffer caviar edition.