Toei Musen CM-A20H monitor help

Archived from groups: rec.games.video.arcade.collecting (More info?)

I have a Time Pilot with a 19" Toei Musen CM-A20H monitor that was DOA.
I did a cap kit and the monitor came on but it's not right. When you
first turn on the game it takes a good min. to get going. During this
time the picture is dim, shrunk and scrambled. Once it gets warmed up,
the picture is not wide or high enough. On one side it looks like the
graphics are wrapping around from behind.?.? I replaced all of the caps
so I'm not sure what to do next, I tried all of the available
adjustments but I cant get it right. Also, the rings on the neck don't
seem to have any effect when I adjust them. Any help will be
appreciated, thanks...

-Dave

Archived from groups: rec.games.video.arcade.collecting (More info?)

Can I get a flyback for this monitor? Also, there are 2 surface mounted
transistors on the chassis, could one or both of these be part of the
problem? I agree about the bloating of parts, there are a ton of
components on this board, and I thought my Tempest monitor was bad.

-Dave

Archived from groups: rec.games.video.arcade.collecting (More info?)

I have couple of these chassis. If you want some parts let me know I could
take them out test and send them to you
"dbpbandit" <davep@premierbev.com> wrote in message
news:1121962022.474850.48960@g14g2000cwa.googlegroups.com...
> Can I get a flyback for this monitor? Also, there are 2 surface mounted
> transistors on the chassis, could one or both of these be part of the
> problem? I agree about the bloating of parts, there are a ton of
> components on this board, and I thought my Tempest monitor was bad.
>
> -Dave
>