"House Rules" sign pricing

Archived from groups: rec.games.video.arcade.collecting (More info?)

OK, here is what I have so far. These quotes are JUST for the main house
rules sign. Once I decide which format to go with, they will quote out the
other 2 signs. I would expect them to be roughly proportionally priced
based on size.

Option 1: 20"x11" silkscreened on velvet lexan $30. This will be similar
to a CPO. It will have an adhesive back, and you provide the material to
mount it on

Option 2: 20" x 11" silkscreened on acrylic. This will be laser cut with 2
holes and radius corners. SINGLE sided. $50

Option 3: 20" x 11" silkscreened on acrylic. This will be laser cut with 2
holes and radius corners. DOUBLE sided. $65

Without knowing for sure, I'm guessing that each additional sign will be
roughly 1/2 the cost of the big one. Also, if we went with option 2, I'm
guessing that we might not want to laser cut the 2 holes, because it will be
less likely to be used as a hanging sign if its only 1 sided.

For those that don't know what I'm talking about, here is a link to the sign
(thanks to Peter Hirschberg for doing all of the work):

http://www.peterhirschberg.com/arcade/art.htm

Please rank the options from best to worst.

Archived from groups: rec.games.video.arcade.collecting (More info?)

I'd like to add option 4 - same as option 3 but full size (46" x 23" ).

In order of preference, 4,3,2,1

-Peter

Archived from groups: rec.games.video.arcade.collecting (More info?)

I like number 1 because of the price. Mine will go on the wall or on a
stand build for the sign at the entrance to my arcade.

Archived from groups: rec.games.video.arcade.collecting (More info?)

I'd say option 2 as I would be hanging it on a wall, but I would pay for
option 3 if it was my only choice.

Anthony

--
Anthony Pietrak
www.QuarterArcade.com


"Chuk" <chuk@ourcade.com> wrote in message
news:KmcEe.146505$ZV3.36610@fe62.usenetserver.com...
> OK, here is what I have so far. These quotes are JUST for the main house
> rules sign. Once I decide which format to go with, they will quote out
the
> other 2 signs. I would expect them to be roughly proportionally priced
> based on size.
>
> Option 1: 20"x11" silkscreened on velvet lexan $30. This will be similar
> to a CPO. It will have an adhesive back, and you provide the material to
> mount it on
>
> Option 2: 20" x 11" silkscreened on acrylic. This will be laser cut with
2
> holes and radius corners. SINGLE sided. $50
>
> Option 3: 20" x 11" silkscreened on acrylic. This will be laser cut with
2
> holes and radius corners. DOUBLE sided. $65
>
> Without knowing for sure, I'm guessing that each additional sign will be
> roughly 1/2 the cost of the big one. Also, if we went with option 2, I'm
> guessing that we might not want to laser cut the 2 holes, because it will
be
> less likely to be used as a hanging sign if its only 1 sided.
>
> For those that don't know what I'm talking about, here is a link to the
sign
> (thanks to Peter Hirschberg for doing all of the work):
>
> http://www.peterhirschberg.com/arcade/art.htm
>
> Please rank the options from best to worst.
>
>
>

Archived from groups: rec.games.video.arcade.collecting (More info?)

3,2,1 and if there really is an option 4 I'll go for that one since
it's original size.

Jess








"Chuk" <chuk@ourcade.com> wrote in
news:KmcEe.146505$ZV3.36610@fe62.usenetserver.com:

> OK, here is what I have so far. These quotes are JUST for the main
> house rules sign. Once I decide which format to go with, they will
> quote out the other 2 signs. I would expect them to be roughly
> proportionally priced based on size.
>
> Option 1: 20"x11" silkscreened on velvet lexan $30. This will be
> similar to a CPO. It will have an adhesive back, and you provide the
> material to mount it on
>
> Option 2: 20" x 11" silkscreened on acrylic. This will be laser cut
> with 2 holes and radius corners. SINGLE sided. $50
>
> Option 3: 20" x 11" silkscreened on acrylic. This will be laser cut
> with 2 holes and radius corners. DOUBLE sided. $65
>
> Without knowing for sure, I'm guessing that each additional sign will
be
> roughly 1/2 the cost of the big one. Also, if we went with option 2,
> I'm guessing that we might not want to laser cut the 2 holes, because
it
> will be less likely to be used as a hanging sign if its only 1 sided.
>
> For those that don't know what I'm talking about, here is a link to
the
> sign (thanks to Peter Hirschberg for doing all of the work):
>
> http://www.peterhirschberg.com/arcade/art.htm
>
> Please rank the options from best to worst.
>
>
>