Hello all,
Installing properly my new MSI 6800 GT artifacts appears on the desktop containing green(mostly)& red points disappearing when raising Color Quality to 32 Bits. Directx cube freezes in DirectDraw & Direct3d tests. All programs runs fine except 3d games. A clean install of OS and/or MSI & NVIDIA whql drivers don't fix the issue. I reserve an exclusive 12V line(@36A)for VC power connector, proving all of 4 molex. I put my MSI 6800 GT $ PSU on my old P3-800 256MB Rambus and Directx tests pass. I put my old Creative TNT2 32MB on my new PC's AGP slot, passing all tests. My new system(see signature) pass memtest86, SuperPi & prime95. Not overclocking either CPU or GPU and all Temps and Voltages are normal except a very little high 12.58-12.70V in +12V rail. Official MSI VC BIOS.
When I got this VC it worked fine. Then I auto-overclocked to 410/1110MHz. At some time (I didn't know when) my VC failed.
Thank you so much for your help and attention.
Signature(values from the BIOS):
CPU: AMD Athlon64 3500+ NewCastle (0.13) @ 2210MHz(stock), 200MHz/4x/11x, Vcore= 1.48-1.50V, Tcpu= 41-46C, Tsys= 36-37C, stock fan.
Mobo: MSI K8N Neo2 Platinum BIOS v.1.50(official). Tpcb= N/A stock fan cooling.
RAM Mem: 2x CORSAIR 512CMX-3200C2=1GB @200MHz Dual Channel, Vmem= 2.60V, CAS: 2.5-3-3-6/1T.
GPU: MSI 6800 GT 256MB AGP, BIOS v.5.40.02.15.01(official), 350/1000MHz(stock), Vgpu= 1.50, 1.55 o 1.60V, AGPfreq= 66, 67 o 72, AGPapert= 128MB o 256MB, Tgpu= 49-55C.
Monitor: Samsung SyncMaster 710N 17" LCD, 1024x768@75Hz-32Bits (latest drivers)
HDD: Western Digital WD740GD SATA 74.3GB, 10K RPM.
PSU: Aspire Chameleon 550w, 1x 120mm fan, +3.3V@32A(3.32-3.36V), +5V@34A(5.13-5.15V), +12V@36A(12.58-12.70V, a little high but not decisive, I guess. VC it was working!)
CDRW/DVD Combo: Lite-On SOHC-5235K (disconnected to run dxdiag).
DVD/RW: NEC ND-3520A Dual Layer (disconnected to run dxdiag).
FDD: Samsung 1.44MB (disconnected to run dxdiag).
Case: Thermaltake Shark Full Tower, 2x 120mm fans. Tamb= 36-37C
Installing properly my new MSI 6800 GT artifacts appears on the desktop containing green(mostly)& red points disappearing when raising Color Quality to 32 Bits. Directx cube freezes in DirectDraw & Direct3d tests. All programs runs fine except 3d games. A clean install of OS and/or MSI & NVIDIA whql drivers don't fix the issue. I reserve an exclusive 12V line(@36A)for VC power connector, proving all of 4 molex. I put my MSI 6800 GT $ PSU on my old P3-800 256MB Rambus and Directx tests pass. I put my old Creative TNT2 32MB on my new PC's AGP slot, passing all tests. My new system(see signature) pass memtest86, SuperPi & prime95. Not overclocking either CPU or GPU and all Temps and Voltages are normal except a very little high 12.58-12.70V in +12V rail. Official MSI VC BIOS.
When I got this VC it worked fine. Then I auto-overclocked to 410/1110MHz. At some time (I didn't know when) my VC failed.
Thank you so much for your help and attention.
Signature(values from the BIOS):
CPU: AMD Athlon64 3500+ NewCastle (0.13) @ 2210MHz(stock), 200MHz/4x/11x, Vcore= 1.48-1.50V, Tcpu= 41-46C, Tsys= 36-37C, stock fan.
Mobo: MSI K8N Neo2 Platinum BIOS v.1.50(official). Tpcb= N/A stock fan cooling.
RAM Mem: 2x CORSAIR 512CMX-3200C2=1GB @200MHz Dual Channel, Vmem= 2.60V, CAS: 2.5-3-3-6/1T.
GPU: MSI 6800 GT 256MB AGP, BIOS v.5.40.02.15.01(official), 350/1000MHz(stock), Vgpu= 1.50, 1.55 o 1.60V, AGPfreq= 66, 67 o 72, AGPapert= 128MB o 256MB, Tgpu= 49-55C.
Monitor: Samsung SyncMaster 710N 17" LCD, 1024x768@75Hz-32Bits (latest drivers)
HDD: Western Digital WD740GD SATA 74.3GB, 10K RPM.
PSU: Aspire Chameleon 550w, 1x 120mm fan, +3.3V@32A(3.32-3.36V), +5V@34A(5.13-5.15V), +12V@36A(12.58-12.70V, a little high but not decisive, I guess. VC it was working!)
CDRW/DVD Combo: Lite-On SOHC-5235K (disconnected to run dxdiag).
DVD/RW: NEC ND-3520A Dual Layer (disconnected to run dxdiag).
FDD: Samsung 1.44MB (disconnected to run dxdiag).
Case: Thermaltake Shark Full Tower, 2x 120mm fans. Tamb= 36-37C