Galaxian side art

Archived from groups: rec.games.video.arcade.collecting (More info?)

Hello,
Does anyone know or could someone measure for me the exact dimensions
of the sideart on an original Galaxian UR?. Also how far down from the
top edge is the artwork placed on the cab?
Any help would be greatly appreciated.
Thanks,
Rich Harkoff

Archived from groups: rec.games.video.arcade.collecting (More info?)

estimating from the size of the art this would probably cost about $150-160
plus shipping for the set (2 sides and a kickplate) done on adhesive vinyl
printed high resolution inkjet at 600dpi with solvent inks.

add about $15 for a marquee
add about $20 for a textured laminated CPO

in case anyone was interested.

keith.


"Corey C." <cooke@jory.ca> wrote in message
news:1122732668.464167.23510@g14g2000cwa.googlegroups.com...
> Hi Rich,
> 68.5" High x 31.5" deep. You'll find the exact dimensions on the flyer
> at:
> http://www.arcadeflyers.net/?page= [...] 26&image=1
>
> And the sideart fills the entire side of the cabinet, so you won't be
> placing it down from the top edge at all. But if you're looking to have
> some of this stuff made, I recommend reading the following:
> http://tinyurl.com/bmvfj
>
> Good luck.
>