Sign in with
Sign up | Sign in
Your question

Dcom

Last response: in Windows XP
Share
Anonymous
June 19, 2005 10:36:01 AM

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Desperate need of help

Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10010
Date: 6/18/2005
Time: 1:00:05 PM
User: HOME-6560B0CB4F\Brennan
Computer: HOME-6560B0CB4F
Description:
The server {A02ED9E9-8D36-473A-98ED-C253A40765DE} did not register with DCOM
within the required timeout.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


I keep getting this error and the when i re-boot the system i get the blue
screen of death.
Can anyone help please
I also have another error


Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 5/23/2005
Time: 12:20:53 PM
User: N/A
Computer: HOME-6560B0CB4F
Description:
The following boot-start or system-start driver(s) failed to load:
AFD
Fips
IPSec
MRxSmb
NetBIOS
NetBT
PQIMount
RasAcd
Rdbss
SAVRTPEL
SYMTDI
Tcpip

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

More about : dcom

Anonymous
June 19, 2005 2:25:01 PM

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

As per Microsoft: "This happens when the server was launched but there was no
reply from the server. The application may be configured incorrectly and you
should check that the application is configured properly". The server here is
the server application vs. the client application (and they may reside on the
same computer). Obviously this explanation is not too useful.

There are several causes for this error and they depend on what component is
reported (you can lookup the GUID in the registry). A good troubleshooting
approach is searching the newsgroups for the GUID string.


If you do not need DCOM you can disable it in the following way:
3.For Windows XP and Windows Server 2003, complete the following additional
steps:
A. Run Dcomcnfg.exe.
B. Expand Component Services.
C. Right-click Computer and press Properties. For a remote computer,
right-click Computer, press New, press Computer, type the ComputerName,
right-click the ComputerName and press Properties.
D. Select the Default Properties tab.
E. Clear the Enable Distributed COM on this Computer box.
F. press Apply to disable DCOM.
G. Press OK and exit Dcomcnfg.exe.
H. Shutdown and restart your computer.


-------------------------------------------------------------------------------------------------
If a device is not working properly, its driver fails to load when NT/2000
starts. A device can be related to a backup tape, cdrom driver, zip drive,
any type of hardware actually. The message is quite typical to occur when a a
tape drive is removed from a server.

See the following Q articles for various devices:
- Q129115 for PRLNTSS.SYS
- Q157678 and Q152346 for 4mmdat.sys
- Q178558 for HPDANT

Also run chkdsk


--
---------------------------------------
http://www.fast-rewind.com
---------------------------------------



"winxp problems" wrote:

> Desperate need of help
>
> Event Type: Error
> Event Source: DCOM
> Event Category: None
> Event ID: 10010
> Date: 6/18/2005
> Time: 1:00:05 PM
> User: HOME-6560B0CB4F\Brennan
> Computer: HOME-6560B0CB4F
> Description:
> The server {A02ED9E9-8D36-473A-98ED-C253A40765DE} did not register with DCOM
> within the required timeout.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
>
> I keep getting this error and the when i re-boot the system i get the blue
> screen of death.
> Can anyone help please
> I also have another error
>
>
> Event Type: Error
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7026
> Date: 5/23/2005
> Time: 12:20:53 PM
> User: N/A
> Computer: HOME-6560B0CB4F
> Description:
> The following boot-start or system-start driver(s) failed to load:
> AFD
> Fips
> IPSec
> MRxSmb
> NetBIOS
> NetBT
> PQIMount
> RasAcd
> Rdbss
> SAVRTPEL
> SYMTDI
> Tcpip
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
!