Tech: Clay Cowgills Multipac.

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

Hi All.

I have an on-going probelm with this.

Ever since I have gotten his kit, I could never get it working.

Finally, I have my own place and am dpening the time with each of my
hames....current project is ms pacman.

I just installed my multi-pac, plugged it in, I get gameplay, but a
very faded partial picture during gameplay..with NO menu.

I have swapped boardsets with other known working boards, but still
get the same thing.

Any idea how I should proceed??

Tnx!!!

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

I have an idea, ask Clay. Seems if it never worked, then Clay would
work with you. Or, see if Clay will service it.

Todd

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

Yups.

E-mailed him already.

Seems to bee either the 4a or 7f. If I can get them locally, I will,
just gotta figure out what chips they are.

On 1 Sep 2005 18:50:52 -0700, studiobassist@hotmail.com wrote:

>I have an idea, ask Clay. Seems if it never worked, then Clay would
>work with you. Or, see if Clay will service it.
>
>Todd

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

ArcadeNO@SPAMshaw.ca wrote:
> Yups.
>
> E-mailed him already.
>
> Seems to bee either the 4a or 7f. If I can get them locally, I will,
> just gotta figure out what chips they are.

They are bipolar PROMs ( 82s123 and 82s129 ).

Many fine folks on this NG can help you out.
(...and so can I ! ) ;-)


Cheers,
Steph
www.HobbyRoms.com

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

This may be of help:

Clay's kit doesn't use the 4A and 7F color PROMs. They are removed with the
installation of his kit. I just went from Clay's kit to Mike Doyle's kit,
and had to add the 4A and 7F chips back to the board. Incidentally, Stephan
@ HobbyROMs.com burned them for me and did a fantastic job with very fast
shipping.

Also, here's a link to the guide for Clay's kit (at the bottom of the page):

http://www.klov.com/game_detail.php?letter=M&game_id=8789

Hope this helps.


<ArcadeNO@SPAMshaw.ca> wrote in message
news:u0afh11vitmjt6rteo8nth8stiqj68riak@4ax.com...
> Hi All.
>
> I have an on-going probelm with this.
>
> Ever since I have gotten his kit, I could never get it working.
>
> Finally, I have my own place and am dpening the time with each of my
> hames....current project is ms pacman.
>
> I just installed my multi-pac, plugged it in, I get gameplay, but a
> very faded partial picture during gameplay..with NO menu.
>
> I have swapped boardsets with other known working boards, but still
> get the same thing.
>
> Any idea how I should proceed??
>
> Tnx!!!