Tech: W/G 7000 13" monitor

Archived from groups: rec.games.video.arcade.collecting (More info?)

Hey all,
I have a 13" W/G 7000 monitor it was a little flaky and I knew it needed a
cap kit. I had it plugged up to one of my projects for testing and it was
working fine. While I was working the pic became very unstable and shrunk
horizontally so I decided to just go ahead and cap it and rejuvenate it.
After that was complete I plugged it back up and the picture is awesome
looking bright colors, crisp...However the picture is still shrunk where it
leaves about 2" of empty screen on each side. Can anyone tell me what to
look for????? TIA.....John

Archived from groups: rec.games.video.arcade.collecting (More info?)

have you played with the horizontal width coil? it could have gone bad or
have been adjusted to counter the effects of the caps going bad so you might
need to re-adjust it.

"John Hacker" <tmc@wi.rr.com> wrote in message
news_F_e.49487$mb4.15677@tornado.rdc-kc.rr.com...
> Hey all,
> I have a 13" W/G 7000 monitor it was a little flaky and I knew it needed a
> cap kit. I had it plugged up to one of my projects for testing and it was
> working fine. While I was working the pic became very unstable and shrunk
> horizontally so I decided to just go ahead and cap it and rejuvenate it.
> After that was complete I plugged it back up and the picture is awesome
> looking bright colors, crisp...However the picture is still shrunk where
> it leaves about 2" of empty screen on each side. Can anyone tell me what
> to look for????? TIA.....John
>