PLS HELP. GO7 13" MONITOR PROBLEMS ON CABARET

Archived from groups: rec.games.video.arcade.marketplace (More info?)

Hello all. Well, I have a Missile Command Cabaret that has a GO7 13
inch monitor in it. Well, the neck board is cracked. I have two other
monitor chassis that are marked work/rebuilt on the box. They are also
G07 chassis. I tried them both, but it looks like the crt does not
light up. I'm so bummed. I checked voltage, and the connection going in
to the chassis reads 107 volts. Is that enough? Also I noticed that the
13 inch chassis neck board is a little different than the 19 inch , but
seems like only the part that connects to the crt tube. Can someone
PLEASE help me as I have waisted half the day yesterday in what I
thought would be a simple chassis swap. I will be very thankful for
any help here. Thx in advance. Bob

Bobbys World Amus.

Archived from groups: rec.games.video.arcade.marketplace (More info?)

Mark C. Spaeth wrote:
> matrix42@sover.net wrote:
> : Hello all. Well, I have a Missile Command Cabaret that has a GO7 13
> : inch monitor in it. Well, the neck board is cracked. I have two
other
> : monitor chassis that are marked work/rebuilt on the box. They are
also
> : G07 chassis. I tried them both, but it looks like the crt does not
> : light up. I'm so bummed. I checked voltage, and the connection
going in
> : to the chassis reads 107 volts. Is that enough? Also I noticed that
the
> : 13 inch chassis neck board is a little different than the 19 inch ,
but
> : seems like only the part that connects to the crt tube. Can someone
> : PLEASE help me as I have waisted half the day yesterday in what I
> : thought would be a simple chassis swap. I will be very thankful
for
> : any help here. Thx in advance. Bob
> :
> : Bobbys World Amus.
> :
>
> The 13 and 19" GO7 tubes have different pinouts on the neck socket,
so
> the neck boards are different. A 19" GO7 Chassis won't work on a
13".
> Most importantly, the heater pins are in different places, so even if

> one of the 19" chasses is good, you won't get neck glow on the 13"
tube.
>
> Just fixed the cracked neck board.
>
> --
> Mark Spaeth mspaeth@mtl.mit.edu
> 50 Vassar St., #38.265 mspaeth@mit.edu
> Cambridge, MA 02139
> (617) 452-2354 http://rgvac.978.org/~mspaeth

Hey Mark. Thanks alot for the reply and the help. Well, the neck board
is broken totally in half. Also the chassis doesn't look all that
healthy. I just bought this game from someone in Maine. (name not
mentioned as of yet), and was taken for a ride. Paid enough for it, and
the game has some problems to say the least. Can you please direct me
to where I can buy another chassis or complete monitor etc..... Or new
one? I will be putting this game in my gameroom with all my best games.
If someone is willing to trade for parts or another monitor, I
will be glad to do that or pay for used or new. Thx again for any help.
Regards, Bob

Archived from groups: rec.games.video.arcade.marketplace (More info?)

Mark C. Spaeth wrote:
> matrix42@sover.net wrote:
> :
> : Hey Mark. Thanks alot for the reply and the help. Well, the neck
board
> : is broken totally in half. Also the chassis doesn't look all that
> : healthy. I just bought this game from someone in Maine. (name not
> : mentioned as of yet), and was taken for a ride. Paid enough for it,
and
> : the game has some problems to say the least. Can you please direct
me
> : to where I can buy another chassis or complete monitor etc..... Or
new
> : one? I will be putting this game in my gameroom with all my best
games.
> : If someone is willing to trade for parts or another monitor, I
> : will be glad to do that or pay for used or new. Thx again for any
help.
> : Regards, Bob
>
> Aaron? Heh.
>
> Good thing I didn't buy that one
>
> LOL.... How the heck did you know? I have to give him a call to
discuss my dismay on this thing.( I know there is nothing he can do for
me though I'm sure). I'm not into flaming anyone, however, it was
nothing like heading said. I might just call amusements plus or Betson
I guess and just buy a new 13inch monitor for this thing. I just hope I
can find a decent control panel sometime as this one had electrical
tape covering the entire edge of the control panel that had peeling
paint and rust underneath. AAAAAARRRRGGGGGGGGGGG...........Thx again,
Bob
> --
> Mark Spaeth mspaeth@mtl.mit.edu
> 50 Vassar St., #38.265 mspaeth@mit.edu
> Cambridge, MA 02139
> (617) 452-2354 http://rgvac.978.org/~mspaeth