G
Guest
Guest
Archived from groups: rec.games.video.arcade.marketplace (More info?)
Ok - I've got some stuff to get rid of on the cheap. The short of it
is that I've had this JAMMA cocktail table for a while with an awesome
19" monitor and nothing to do. More recently, I picked up a cabinet
that needed some monitor repairs (a cap kit and some new transistors, I
suspect) and happened to be a 19" as well. So, I swapped the monitors.
Now, I just want to get the lousy (but fixable!) monitor and cocktail
table into a new home or a new project. The following link holds
several pictures of the cocktail:
http://www.gis.net/~bertulli/cocktail/
oldcocktailtop.jpg illustrates how it looked before I turned it into a
vertical shooter cocktail (shown in all the other pics). I still have
the green panel pieces, trackballs, and original golf PCB. As of now,
there are no boards inside the table, the top is detached, the monitor
isn't installed, and a whole mess of screws are sitting at the bottom.
The power supply is great, the JAMMA harness is all wired up, there's a
decent coin door, etc. Someone claim this.
Right now, I'm looking for $50ish. That includes the cocktail,
monitor, pieces of chassis, power supply, harness, and all the old golf
parts and pcb (unless you don't want it). I plan to yank the joystick
and three blue buttons out of the panel before it goes, but I could be
persuaded to leave them if you really want 'em. Pick it up yourself -
I'll help you carry it out of the basement (it's easy to move). It's
located in Hudson, MA - between Boston and Worcester. Email be
directly with any questions, interest, or offers (bertulli@gis.net).
Thanks!
Ok - I've got some stuff to get rid of on the cheap. The short of it
is that I've had this JAMMA cocktail table for a while with an awesome
19" monitor and nothing to do. More recently, I picked up a cabinet
that needed some monitor repairs (a cap kit and some new transistors, I
suspect) and happened to be a 19" as well. So, I swapped the monitors.
Now, I just want to get the lousy (but fixable!) monitor and cocktail
table into a new home or a new project. The following link holds
several pictures of the cocktail:
http://www.gis.net/~bertulli/cocktail/
oldcocktailtop.jpg illustrates how it looked before I turned it into a
vertical shooter cocktail (shown in all the other pics). I still have
the green panel pieces, trackballs, and original golf PCB. As of now,
there are no boards inside the table, the top is detached, the monitor
isn't installed, and a whole mess of screws are sitting at the bottom.
The power supply is great, the JAMMA harness is all wired up, there's a
decent coin door, etc. Someone claim this.
Right now, I'm looking for $50ish. That includes the cocktail,
monitor, pieces of chassis, power supply, harness, and all the old golf
parts and pcb (unless you don't want it). I plan to yank the joystick
and three blue buttons out of the panel before it goes, but I could be
persuaded to leave them if you really want 'em. Pick it up yourself -
I'll help you carry it out of the basement (it's easy to move). It's
located in Hudson, MA - between Boston and Worcester. Email be
directly with any questions, interest, or offers (bertulli@gis.net).
Thanks!