Unable to burn DVD's but can Burn CD's

Mike · Jul 23, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

help.....I know it's maybe the wrong NG, but could you help or direct
me to the right one.
This morning I tried to burn data to a DVD......only burnt the intro then
stopped with a error.
Tried again ... same thing...
Virus checked, spyware checked, all OK
Did a sfc scannow, did a system restore to 2 days ago.
Tried again, same results.
Un-installed Nero and removed all traces from registry.
Reloaded Nero.
Tried again, same results.
I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
I am adding the error message, I know its long but in other posts it has
been said that not enough info is given.
Nothing unusual happened at shutdown last night or bootup this morning.
Problems seem to start at 8:48:15 AM #21
I don't know how to interpret this data, hoping someone can help.
TIA
Thanks again
Mike

ERROR
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.13 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 -
6.3.1.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 -
6.3.1.13
Adapter driver: <xmasscsi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0
DMA: On
DiskPeripheral : ST3160023A atapi Port 0 ID 1
DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 1
DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0
DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081 D: CDRom0
HL-DT-ST RW/DVD GCC-4521 E: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 376MB (385640kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.7.2005
CD-ROM (MP3)
8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated

8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
Reader running

8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4081B running

8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Track-at-once, using CD-R/RW media

8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 290017 ( 64:28.67)

8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRAM GSA-4081B;
CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00
00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3:
00 00 00 (invalid)

8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 290018 (290018) = #290018/64:26.68
relocatable, disc pos for caching/writing not required/required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------

8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
594264064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
290018 | lead-out | 1 | 0x00 | 0x41

8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.

8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 24x (3,600 KB/s)

8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
Set BUFE: supported -> ON

8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01

8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error

8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01

8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
Focus or tracking error

8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
Could not perform EndTrack

8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
HL-DT-ST DVDRAM GSA-4081B\H1 T0

8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
<HL-DT-STDVDRAM GSA-4081B> start Close Session

8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 24x (3,600 KB/s)

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
11/17/2004 9:16:48 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes,
created 12/20/2003 8:03:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)

--

======================================

Learning to dislike children at a early age saves
a lot of expense and aggravation later in life.

=====================================

Guest · Jul 23, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Upgrade to the latest version (6.6) of Nero:
http://ww2.nero.com/enu/nero-up.php

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User
Microsoft Newsgroups

Get Windows XP Service Pack 2 with Advanced Security Technologies:
http://www.microsoft.com/athome/security/protect/windowsxp/choose.mspx

-------------------------------------------------------------------------------------------

"Mike" wrote:

| help.....I know it's maybe the wrong NG, but could you help or direct
| me to the right one.
| This morning I tried to burn data to a DVD......only burnt the intro then
| stopped with a error.
| Tried again ... same thing...
| Virus checked, spyware checked, all OK
| Did a sfc scannow, did a system restore to 2 days ago.
| Tried again, same results.
| Un-installed Nero and removed all traces from registry.
| Reloaded Nero.
| Tried again, same results.
| I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
| I am adding the error message, I know its long but in other posts it has
| been said that not enough info is given.
| Nothing unusual happened at shutdown last night or bootup this morning.
| Problems seem to start at 8:48:15 AM #21
| I don't know how to interpret this data, hoping someone can help.
| TIA
| Thanks again
| Mike
|
| ERROR
| Windows XP 5.1
| IA32
| WinAspi: -
| ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
| size=160016 bytes, created 12/16/2003 8:18:06 PM
| Nero version: 6.3.1.13 (Nero Express)
| Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 -
| 6.3.1.13
| Adapter driver: <atapi> HA 1
| Drive buffer : 2048kB
| Bus Type : default (0) -> ATAPI, detected: ATAPI
| CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 -
| 6.3.1.13
| Adapter driver: <xmasscsi> HA 2
|
| === Scsi-Device-Map ===
| DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0
| DMA: On
| DiskPeripheral : ST3160023A atapi Port 0 ID 1
| DMA: On
| CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
| DMA: On
| CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 1
| DMA: On
| CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0
| DMA: Off
|
| === CDRom-Device-Map ===
| HL-DT-ST DVDRAM GSA-4081 D: CDRom0
| HL-DT-ST RW/DVD GCC-4521 E: CDRom1
| AXV CD/DVD-ROM G: CDRom2
| =======================
|
| AutoRun : 1
| Excluded drive IDs:
| CmdQueuing : 1
| CmdNotification: 2
| WriteBufferSize: 83886080 (0) Byte
| ShowDrvBufStat : 0
| EraseSpeed : 0
| BUFE : 0
| Physical memory : 767MB (785904kB)
| Free physical memory: 376MB (385640kB)
| Memory in use : 50 %
| Uncached PFiles: 0x0
| Use Static Write Speed Table: 0
| Use Inquiry : 1
| Global Bus Type: default (0)
| Check supported media : Disabled (0)
|
| 22.7.2005
| CD-ROM (MP3)
| 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
| Iso document burn settings
| ------------------------------------------
| Determine maximum speed : FALSE
| Simulate : FALSE
| Write : TRUE
| Finalize CD : TRUE
| Multisession : FALSE
| Burning mode : TAO
| Mode : 1
| ISO Level : 1 (Max. of 11 = 8 + 3 char)
| Character set : ISO 9660
| Joliet : TRUE
| Allow pathdepth more than 8 directories : TRUE
| Allow more than 255 characters in path : TRUE
| Write ISO9660 ;1 file extensions : TRUE
|
| 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
| Buffer Underrun Protection activated
|
| 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
| Reader running
|
| 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
| Writer HL-DT-ST DVDRAM GSA-4081B running
|
| 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
| First writeable address = 0 (0x00000000)
|
| 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
| Turn on Track-at-once, using CD-R/RW media
|
| 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
| Last possible write address on media: 359848 ( 79:59.73)
| Last address to be written: 290017 ( 64:28.67)
|
| 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
| Write in overburning mode: NO (enabled: CD)
|
| 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
| Recorder: HL-DT-ST DVDRAM GSA-4081B;
| CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
| ATIP Data:
| Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00
| 00 (LO 0:00.00)
| Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3:
| 00 00 00 (invalid)
|
| 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
| >>> Protocol of DlgWaitCD activities: <<<
| =========================================
|
| 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
| Setup items (after recorder preparation)
| 0: TRM_DATA_MODE1 (CTransferItem)
| 2 indices, index0 (150) not provided
| original disc pos #0 + 290018 (290018) = #290018/64:26.68
| relocatable, disc pos for caching/writing not required/required, no
| patch infos
| -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
| 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
| --------------------------------------------------------------
|
| 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
| Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
| DAO infos:
| ==========
| MCN: ""
| TOCType: 0x00; Session Closed, disc fixated
| Tracks 1 to 1:
| 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
| 594264064, ISRC ""
| DAO layout:
| ===========
| __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
| -150 | lead-in | 0 | 0x00 | 0x41
| -150 | 1 | 0 | 0x00 | 0x41
| 0 | 1 | 1 | 0x00 | 0x41
| 290018 | lead-out | 1 | 0x00 | 0x41
|
| 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
| Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.
|
| 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
| Caching of files started
|
| 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
| Cache writing successful.
|
| 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
| Caching of files completed
|
| 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
| Burn process started at 24x (3,600 KB/s)
|
| 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
| Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
| orig at #0): write at #0
|
| 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
| Set BUFE: supported -> ON
|
| 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
| SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
| Status: 0x04 (0x01, SCSI_ERR)
| HA-Status 0x00 (0x00, OK)
| TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
| Sense Key: 0x04 (KEY_HARDWARE_ERROR)
| Sense Code: 0x09
| Sense Qual: 0x01
| CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
| Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
| 0x34 0x10 0x04 0x80 0x09 0x01
|
| 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
| Focus or tracking error
|
| 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
| all writers idle, stopping conversion
|
| 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
| conversion idle, stopping reader
|
| 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
| SCSI Exec, HA 1, TA 0, LUN 0
| Status: 0x04 (0x01, SCSI_ERR)
| HA-Status 0x00 (0x00, OK)
| TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
| Sense Key: 0x04 (KEY_HARDWARE_ERROR)
| Sense Code: 0x09
| Sense Qual: 0x01
| CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
| Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
| 0x34 0x10 0x04 0x80 0x09 0x01
|
| 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
| Focus or tracking error
|
| 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
| Could not perform EndTrack
|
| 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
| Invalid write state
| HL-DT-ST DVDRAM GSA-4081B\H1 T0
|
| 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
| Could not perform EndTrack
|
| 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
| <HL-DT-STDVDRAM GSA-4081B> start Close Session
|
| 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
| Set remaining time: 0:00,000 (0ms) -> OK
|
| 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
| Burn process failed at 24x (3,600 KB/s)
|
|
| Existing drivers:
| File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
| 11/17/2004 9:16:48 AM
| File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
| 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
| File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
| size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
| File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes,
| created 12/20/2003 8:03:42 PM (Adapter driver for src)
|
| Registry Keys:
| HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
| 0 (Security Option)

Guest · Jul 23, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

You may need to update the firmware for the RW drive if updating Nero fails
to solve the problem. Nero 5.5 works just fine now, after I updated my
firmware.

j;-)

"Mike" wrote:

> help.....I know it's maybe the wrong NG, but could you help or direct
> me to the right one.
> This morning I tried to burn data to a DVD......only burnt the intro then
> stopped with a error.
> Tried again ... same thing...
> Virus checked, spyware checked, all OK
> Did a sfc scannow, did a system restore to 2 days ago.
> Tried again, same results.
> Un-installed Nero and removed all traces from registry.
> Reloaded Nero.
> Tried again, same results.
> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
> I am adding the error message, I know its long but in other posts it has
> been said that not enough info is given.
> Nothing unusual happened at shutdown last night or bootup this morning.
> Problems seem to start at 8:48:15 AM #21
> I don't know how to interpret this data, hoping someone can help.
> TIA
> Thanks again
> Mike
>
> ERROR
> Windows XP 5.1
> IA32
> WinAspi: -
> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
> size=160016 bytes, created 12/16/2003 8:18:06 PM
> Nero version: 6.3.1.13 (Nero Express)
> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 -
> 6.3.1.13
> Adapter driver: <atapi> HA 1
> Drive buffer : 2048kB
> Bus Type : default (0) -> ATAPI, detected: ATAPI
> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 -
> 6.3.1.13
> Adapter driver: <xmasscsi> HA 2
>
> === Scsi-Device-Map ===
> DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0
> DMA: On
> DiskPeripheral : ST3160023A atapi Port 0 ID 1
> DMA: On
> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
> DMA: On
> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 1
> DMA: On
> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0
> DMA: Off
>
> === CDRom-Device-Map ===
> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
> AXV CD/DVD-ROM G: CDRom2
> =======================
>
> AutoRun : 1
> Excluded drive IDs:
> CmdQueuing : 1
> CmdNotification: 2
> WriteBufferSize: 83886080 (0) Byte
> ShowDrvBufStat : 0
> EraseSpeed : 0
> BUFE : 0
> Physical memory : 767MB (785904kB)
> Free physical memory: 376MB (385640kB)
> Memory in use : 50 %
> Uncached PFiles: 0x0
> Use Static Write Speed Table: 0
> Use Inquiry : 1
> Global Bus Type: default (0)
> Check supported media : Disabled (0)
>
> 22.7.2005
> CD-ROM (MP3)
> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
> Iso document burn settings
> ------------------------------------------
> Determine maximum speed : FALSE
> Simulate : FALSE
> Write : TRUE
> Finalize CD : TRUE
> Multisession : FALSE
> Burning mode : TAO
> Mode : 1
> ISO Level : 1 (Max. of 11 = 8 + 3 char)
> Character set : ISO 9660
> Joliet : TRUE
> Allow pathdepth more than 8 directories : TRUE
> Allow more than 255 characters in path : TRUE
> Write ISO9660 ;1 file extensions : TRUE
>
> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
> Buffer Underrun Protection activated
>
> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
> Reader running
>
> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
> Writer HL-DT-ST DVDRAM GSA-4081B running
>
> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
> First writeable address = 0 (0x00000000)
>
> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
> Turn on Track-at-once, using CD-R/RW media
>
> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
> Last possible write address on media: 359848 ( 79:59.73)
> Last address to be written: 290017 ( 64:28.67)
>
> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
> Write in overburning mode: NO (enabled: CD)
>
> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
> Recorder: HL-DT-ST DVDRAM GSA-4081B;
> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
> ATIP Data:
> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00
> 00 (LO 0:00.00)
> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3:
> 00 00 00 (invalid)
>
> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
> >>> Protocol of DlgWaitCD activities: <<<
> =========================================
>
> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
> Setup items (after recorder preparation)
> 0: TRM_DATA_MODE1 (CTransferItem)
> 2 indices, index0 (150) not provided
> original disc pos #0 + 290018 (290018) = #290018/64:26.68
> relocatable, disc pos for caching/writing not required/required, no
> patch infos
> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
> --------------------------------------------------------------
>
> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
> DAO infos:
> ==========
> MCN: ""
> TOCType: 0x00; Session Closed, disc fixated
> Tracks 1 to 1:
> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
> 594264064, ISRC ""
> DAO layout:
> ===========
> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
> -150 | lead-in | 0 | 0x00 | 0x41
> -150 | 1 | 0 | 0x00 | 0x41
> 0 | 1 | 1 | 0x00 | 0x41
> 290018 | lead-out | 1 | 0x00 | 0x41
>
> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
> Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.
>
> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
> Caching of files started
>
> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
> Cache writing successful.
>
> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
> Caching of files completed
>
> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
> Burn process started at 24x (3,600 KB/s)
>
> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
> Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
> orig at #0): write at #0
>
> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
> Set BUFE: supported -> ON
>
> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
> Status: 0x04 (0x01, SCSI_ERR)
> HA-Status 0x00 (0x00, OK)
> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> Sense Code: 0x09
> Sense Qual: 0x01
> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> 0x34 0x10 0x04 0x80 0x09 0x01
>
> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
> Focus or tracking error
>
> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
> all writers idle, stopping conversion
>
> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
> conversion idle, stopping reader
>
> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
> SCSI Exec, HA 1, TA 0, LUN 0
> Status: 0x04 (0x01, SCSI_ERR)
> HA-Status 0x00 (0x00, OK)
> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> Sense Code: 0x09
> Sense Qual: 0x01
> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> 0x34 0x10 0x04 0x80 0x09 0x01
>
> 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
> Focus or tracking error
>
> 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
> Could not perform EndTrack
>
> 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
> Invalid write state
> HL-DT-ST DVDRAM GSA-4081B\H1 T0
>
> 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
> Could not perform EndTrack
>
> 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
> <HL-DT-STDVDRAM GSA-4081B> start Close Session
>
> 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
> Set remaining time: 0:00,000 (0ms) -> OK
>
> 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
> Burn process failed at 24x (3,600 KB/s)
>
>
> Existing drivers:
> File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
> 11/17/2004 9:16:48 AM
> File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
> 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
> File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
> size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
> File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes,
> created 12/20/2003 8:03:42 PM (Adapter driver for src)
>
> Registry Keys:
> HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
> 0 (Security Option)
>
>
>
> --
>
> ======================================
>
> Learning to dislike children at a early age saves
> a lot of expense and aggravation later in life.
>
> =====================================
>
>
>

Mike · Jul 23, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

e reply , will download and let you know.
You mention " Get Windows XP Service Pack 2 with Advanced Security
Technologies"
Service pack is installed with all auto updates, must I re-install?
Mike

"Carey Frisch [MVP]" <cnfrisch@nospamgmail.com> wrote in message
news:eQ1CbwvjFHA.3336@TK2MSFTNGP10.phx.gbl...
> Upgrade to the latest version (6.6) of Nero:
> http://ww2.nero.com/enu/nero-up.php
>
> --
> Carey Frisch
> Microsoft MVP
> Windows XP - Shell/User
> Microsoft Newsgroups
>
> Get Windows XP Service Pack 2 with Advanced Security Technologies:
> http://www.microsoft.com/athome/security/protect/windowsxp/choose.mspx
>
> -------------------------------------------------------------------------------------------
>
> "Mike" wrote:
>
> | help.....I know it's maybe the wrong NG, but could you help or direct
> | me to the right one.
> | This morning I tried to burn data to a DVD......only burnt the intro
> then
> | stopped with a error.
> | Tried again ... same thing...
> | Virus checked, spyware checked, all OK
> | Did a sfc scannow, did a system restore to 2 days ago.
> | Tried again, same results.
> | Un-installed Nero and removed all traces from registry.
> | Reloaded Nero.
> | Tried again, same results.
> | I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
> | I am adding the error message, I know its long but in other posts it has
> | been said that not enough info is given.
> | Nothing unusual happened at shutdown last night or bootup this morning.
> | Problems seem to start at 8:48:15 AM #21
> | I don't know how to interpret this data, hoping someone can help.
> | TIA
> | Thanks again
> | Mike
> |
> | ERROR
> | Windows XP 5.1
> | IA32
> | WinAspi: -
> | ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
> | size=160016 bytes, created 12/16/2003 8:18:06 PM
> | Nero version: 6.3.1.13 (Nero Express)
> | Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA
> 0 -
> | 6.3.1.13
> | Adapter driver: <atapi> HA 1
> | Drive buffer : 2048kB
> | Bus Type : default (0) -> ATAPI, detected: ATAPI
> | CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA
> 0 -
> | 6.3.1.13
> | Adapter driver: <xmasscsi> HA 2
> |
> | === Scsi-Device-Map ===
> | DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID
> 0
> | DMA: On
> | DiskPeripheral : ST3160023A atapi Port 0 ID
> 1
> | DMA: On
> | CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID
> 0
> | DMA: On
> | CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID
> 1
> | DMA: On
> | CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID
> 0
> | DMA: Off
> |
> | === CDRom-Device-Map ===
> | HL-DT-ST DVDRAM GSA-4081 D: CDRom0
> | HL-DT-ST RW/DVD GCC-4521 E: CDRom1
> | AXV CD/DVD-ROM G: CDRom2
> | =======================
> |
> | AutoRun : 1
> | Excluded drive IDs:
> | CmdQueuing : 1
> | CmdNotification: 2
> | WriteBufferSize: 83886080 (0) Byte
> | ShowDrvBufStat : 0
> | EraseSpeed : 0
> | BUFE : 0
> | Physical memory : 767MB (785904kB)
> | Free physical memory: 376MB (385640kB)
> | Memory in use : 50 %
> | Uncached PFiles: 0x0
> | Use Static Write Speed Table: 0
> | Use Inquiry : 1
> | Global Bus Type: default (0)
> | Check supported media : Disabled (0)
> |
> | 22.7.2005
> | CD-ROM (MP3)
> | 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
> | Iso document burn settings
> | ------------------------------------------
> | Determine maximum speed : FALSE
> | Simulate : FALSE
> | Write : TRUE
> | Finalize CD : TRUE
> | Multisession : FALSE
> | Burning mode : TAO
> | Mode : 1
> | ISO Level : 1 (Max. of 11 = 8 + 3 char)
> | Character set : ISO 9660
> | Joliet : TRUE
> | Allow pathdepth more than 8 directories : TRUE
> | Allow more than 255 characters in path : TRUE
> | Write ISO9660 ;1 file extensions : TRUE
> |
> | 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
> | Buffer Underrun Protection activated
> |
> | 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
> | Reader running
> |
> | 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
> | Writer HL-DT-ST DVDRAM GSA-4081B running
> |
> | 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
> | First writeable address = 0 (0x00000000)
> |
> | 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
> | Turn on Track-at-once, using CD-R/RW media
> |
> | 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
> | Last possible write address on media: 359848 ( 79:59.73)
> | Last address to be written: 290017 ( 64:28.67)
> |
> | 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
> | Write in overburning mode: NO (enabled: CD)
> |
> | 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
> | Recorder: HL-DT-ST DVDRAM GSA-4081B;
> | CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
> | ATIP Data:
> | Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00
> 00
> | 00 (LO 0:00.00)
> | Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid),
> 3:
> | 00 00 00 (invalid)
> |
> | 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
> | >>> Protocol of DlgWaitCD activities: <<<
> | =========================================
> |
> | 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
> | Setup items (after recorder preparation)
> | 0: TRM_DATA_MODE1 (CTransferItem)
> | 2 indices, index0 (150) not provided
> | original disc pos #0 + 290018 (290018) = #290018/64:26.68
> | relocatable, disc pos for caching/writing not required/required, no
> | patch infos
> | -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> | 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
> | --------------------------------------------------------------
> |
> | 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
> | Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
> | DAO infos:
> | ==========
> | MCN: ""
> | TOCType: 0x00; Session Closed, disc fixated
> | Tracks 1 to 1:
> | 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
> | 594264064, ISRC ""
> | DAO layout:
> | ===========
> | __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
> | -150 | lead-in | 0 | 0x00 | 0x41
> | -150 | 1 | 0 | 0x00 | 0x41
> | 0 | 1 | 1 | 0x00 | 0x41
> | 290018 | lead-out | 1 | 0x00 | 0x41
> |
> | 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
> | Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.
> |
> | 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
> | Caching of files started
> |
> | 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
> | Cache writing successful.
> |
> | 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
> | Caching of files completed
> |
> | 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
> | Burn process started at 24x (3,600 KB/s)
> |
> | 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
> | Verifying disc position of item 0 (relocatable, disc pos, no patch
> infos,
> | orig at #0): write at #0
> |
> | 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
> | Set BUFE: supported -> ON
> |
> | 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
> | SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
> | Status: 0x04 (0x01, SCSI_ERR)
> | HA-Status 0x00 (0x00, OK)
> | TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> | Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> | Sense Code: 0x09
> | Sense Qual: 0x01
> | CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
> | Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> | 0x34 0x10 0x04 0x80 0x09 0x01
> |
> | 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
> | Focus or tracking error
> |
> | 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
> | all writers idle, stopping conversion
> |
> | 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
> | conversion idle, stopping reader
> |
> | 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
> | SCSI Exec, HA 1, TA 0, LUN 0
> | Status: 0x04 (0x01, SCSI_ERR)
> | HA-Status 0x00 (0x00, OK)
> | TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> | Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> | Sense Code: 0x09
> | Sense Qual: 0x01
> | CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> | Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> | 0x34 0x10 0x04 0x80 0x09 0x01
> |
> | 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
> | Focus or tracking error
> |
> | 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
> | Could not perform EndTrack
> |
> | 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
> | Invalid write state
> | HL-DT-ST DVDRAM GSA-4081B\H1 T0
> |
> | 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
> | Could not perform EndTrack
> |
> | 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
> | <HL-DT-STDVDRAM GSA-4081B> start Close Session
> |
> | 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
> | Set remaining time: 0:00,000 (0ms) -> OK
> |
> | 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
> | Burn process failed at 24x (3,600 KB/s)
> |
> |
> | Existing drivers:
> | File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
> | 11/17/2004 9:16:48 AM
> | File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
> | 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
> | File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
> | size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
> | File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504
> bytes,
> | created 12/20/2003 8:03:42 PM (Adapter driver for src)
> |
> | Registry Keys:
> | HKLM\Software\Microsoft\Windows
> NT\CurrentVersion\WinLogon\AllocateCDROMs :
> | 0 (Security Option)
>

Mike · Jul 23, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

e reply.
"You may need to update the firmware for the RW drive "
What is firmware? do you mean drivers?
The DVD writer only came with a Nero disk.
Mike

"Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
news:391953C4-81EE-4150-90F9-3EB9EC2CB169@microsoft.com...
> You may need to update the firmware for the RW drive if updating Nero
> fails
> to solve the problem. Nero 5.5 works just fine now, after I updated my
> firmware.
>
> j;-)
>
> "Mike" wrote:
>
>> help.....I know it's maybe the wrong NG, but could you help or direct
>> me to the right one.
>> This morning I tried to burn data to a DVD......only burnt the intro then
>> stopped with a error.
>> Tried again ... same thing...
>> Virus checked, spyware checked, all OK
>> Did a sfc scannow, did a system restore to 2 days ago.
>> Tried again, same results.
>> Un-installed Nero and removed all traces from registry.
>> Reloaded Nero.
>> Tried again, same results.
>> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
>> I am adding the error message, I know its long but in other posts it has
>> been said that not enough info is given.
>> Nothing unusual happened at shutdown last night or bootup this morning.
>> Problems seem to start at 8:48:15 AM #21
>> I don't know how to interpret this data, hoping someone can help.
>> TIA
>> Thanks again
>> Mike
>>
>> ERROR
>> Windows XP 5.1
>> IA32
>> WinAspi: -
>> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
>> size=160016 bytes, created 12/16/2003 8:18:06 PM
>> Nero version: 6.3.1.13 (Nero Express)
>> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA
>> 0 -
>> 6.3.1.13
>> Adapter driver: <atapi> HA 1
>> Drive buffer : 2048kB
>> Bus Type : default (0) -> ATAPI, detected: ATAPI
>> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA
>> 0 -
>> 6.3.1.13
>> Adapter driver: <xmasscsi> HA 2
>>
>> === Scsi-Device-Map ===
>> DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0
>> DMA: On
>> DiskPeripheral : ST3160023A atapi Port 0 ID 1
>> DMA: On
>> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
>> DMA: On
>> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 1
>> DMA: On
>> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0
>> DMA: Off
>>
>> === CDRom-Device-Map ===
>> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
>> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
>> AXV CD/DVD-ROM G: CDRom2
>> =======================
>>
>> AutoRun : 1
>> Excluded drive IDs:
>> CmdQueuing : 1
>> CmdNotification: 2
>> WriteBufferSize: 83886080 (0) Byte
>> ShowDrvBufStat : 0
>> EraseSpeed : 0
>> BUFE : 0
>> Physical memory : 767MB (785904kB)
>> Free physical memory: 376MB (385640kB)
>> Memory in use : 50 %
>> Uncached PFiles: 0x0
>> Use Static Write Speed Table: 0
>> Use Inquiry : 1
>> Global Bus Type: default (0)
>> Check supported media : Disabled (0)
>>
>> 22.7.2005
>> CD-ROM (MP3)
>> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
>> Iso document burn settings
>> ------------------------------------------
>> Determine maximum speed : FALSE
>> Simulate : FALSE
>> Write : TRUE
>> Finalize CD : TRUE
>> Multisession : FALSE
>> Burning mode : TAO
>> Mode : 1
>> ISO Level : 1 (Max. of 11 = 8 + 3 char)
>> Character set : ISO 9660
>> Joliet : TRUE
>> Allow pathdepth more than 8 directories : TRUE
>> Allow more than 255 characters in path : TRUE
>> Write ISO9660 ;1 file extensions : TRUE
>>
>> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
>> Buffer Underrun Protection activated
>>
>> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
>> Reader running
>>
>> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
>> Writer HL-DT-ST DVDRAM GSA-4081B running
>>
>> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
>> First writeable address = 0 (0x00000000)
>>
>> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
>> Turn on Track-at-once, using CD-R/RW media
>>
>> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
>> Last possible write address on media: 359848 ( 79:59.73)
>> Last address to be written: 290017 ( 64:28.67)
>>
>> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
>> Write in overburning mode: NO (enabled: CD)
>>
>> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
>> Recorder: HL-DT-ST DVDRAM GSA-4081B;
>> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
>> ATIP Data:
>> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00
>> 00
>> 00 (LO 0:00.00)
>> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid),
>> 3:
>> 00 00 00 (invalid)
>>
>> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
>> >>> Protocol of DlgWaitCD activities: <<<
>> =========================================
>>
>> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
>> Setup items (after recorder preparation)
>> 0: TRM_DATA_MODE1 (CTransferItem)
>> 2 indices, index0 (150) not provided
>> original disc pos #0 + 290018 (290018) = #290018/64:26.68
>> relocatable, disc pos for caching/writing not required/required, no
>> patch infos
>> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
>> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
>> --------------------------------------------------------------
>>
>> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
>> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
>> DAO infos:
>> ==========
>> MCN: ""
>> TOCType: 0x00; Session Closed, disc fixated
>> Tracks 1 to 1:
>> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
>> 594264064, ISRC ""
>> DAO layout:
>> ===========
>> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
>> -150 | lead-in | 0 | 0x00 | 0x41
>> -150 | 1 | 0 | 0x00 | 0x41
>> 0 | 1 | 1 | 0x00 | 0x41
>> 290018 | lead-out | 1 | 0x00 | 0x41
>>
>> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
>> Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.
>>
>> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
>> Caching of files started
>>
>> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
>> Cache writing successful.
>>
>> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
>> Caching of files completed
>>
>> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
>> Burn process started at 24x (3,600 KB/s)
>>
>> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
>> Verifying disc position of item 0 (relocatable, disc pos, no patch
>> infos,
>> orig at #0): write at #0
>>
>> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
>> Set BUFE: supported -> ON
>>
>> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
>> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
>> Status: 0x04 (0x01, SCSI_ERR)
>> HA-Status 0x00 (0x00, OK)
>> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>> Sense Code: 0x09
>> Sense Qual: 0x01
>> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
>> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>> 0x34 0x10 0x04 0x80 0x09 0x01
>>
>> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
>> Focus or tracking error
>>
>> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
>> all writers idle, stopping conversion
>>
>> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
>> conversion idle, stopping reader
>>
>> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
>> SCSI Exec, HA 1, TA 0, LUN 0
>> Status: 0x04 (0x01, SCSI_ERR)
>> HA-Status 0x00 (0x00, OK)
>> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>> Sense Code: 0x09
>> Sense Qual: 0x01
>> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>> 0x34 0x10 0x04 0x80 0x09 0x01
>>
>> 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
>> Focus or tracking error
>>
>> 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
>> Could not perform EndTrack
>>
>> 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
>> Invalid write state
>> HL-DT-ST DVDRAM GSA-4081B\H1 T0
>>
>> 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
>> Could not perform EndTrack
>>
>> 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
>> <HL-DT-STDVDRAM GSA-4081B> start Close Session
>>
>> 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
>> Set remaining time: 0:00,000 (0ms) -> OK
>>
>> 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
>> Burn process failed at 24x (3,600 KB/s)
>>
>>
>> Existing drivers:
>> File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
>> 11/17/2004 9:16:48 AM
>> File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
>> 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
>> File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
>> size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
>> File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504
>> bytes,
>> created 12/20/2003 8:03:42 PM (Adapter driver for src)
>>
>> Registry Keys:
>> HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs
>> :
>> 0 (Security Option)
>>
>>
>>
>> --
>>
>> ======================================
>>
>> Learning to dislike children at a early age saves
>> a lot of expense and aggravation later in life.
>>
>> =====================================
>>
>>
>>

Guest · Jul 24, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

No, I don't mean drivers... The firmware is info that is on a chip in the
unit itself, like a bios chip on the motherboard. Ok, to check your firmware
version go here and get nero info tool.
http://www.iomagic.com/Firmware/NeroInfotool/NeroInfoTool_221.zip
and go here to see how to read the drive string and firmware ver.
http://www.iomagic.com/Firmware/NeroInfotool/neroinfotool.html
and post your results or go to the recorder drives OEM web site to see if a
firmware update is available.

j;-)

"Mike" wrote:

> e reply.
> "You may need to update the firmware for the RW drive "
> What is firmware? do you mean drivers?
> The DVD writer only came with a Nero disk.
> Mike
>
>
> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
> news:391953C4-81EE-4150-90F9-3EB9EC2CB169@microsoft.com...
> > You may need to update the firmware for the RW drive if updating Nero
> > fails
> > to solve the problem. Nero 5.5 works just fine now, after I updated my
> > firmware.
> >
> > j;-)
> >
> > "Mike" wrote:
> >
> >> help.....I know it's maybe the wrong NG, but could you help or direct
> >> me to the right one.
> >> This morning I tried to burn data to a DVD......only burnt the intro then
> >> stopped with a error.
> >> Tried again ... same thing...
> >> Virus checked, spyware checked, all OK
> >> Did a sfc scannow, did a system restore to 2 days ago.
> >> Tried again, same results.
> >> Un-installed Nero and removed all traces from registry.
> >> Reloaded Nero.
> >> Tried again, same results.
> >> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
> >> I am adding the error message, I know its long but in other posts it has
> >> been said that not enough info is given.
> >> Nothing unusual happened at shutdown last night or bootup this morning.
> >> Problems seem to start at 8:48:15 AM #21
> >> I don't know how to interpret this data, hoping someone can help.
> >> TIA
> >> Thanks again
> >> Mike
> >>
> >> ERROR
> >> Windows XP 5.1
> >> IA32
> >> WinAspi: -
> >> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
> >> size=160016 bytes, created 12/16/2003 8:18:06 PM
> >> Nero version: 6.3.1.13 (Nero Express)
> >> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA
> >> 0 -
> >> 6.3.1.13
> >> Adapter driver: <atapi> HA 1
> >> Drive buffer : 2048kB
> >> Bus Type : default (0) -> ATAPI, detected: ATAPI
> >> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA
> >> 0 -
> >> 6.3.1.13
> >> Adapter driver: <xmasscsi> HA 2
> >>
> >> === Scsi-Device-Map ===
> >> DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0
> >> DMA: On
> >> DiskPeripheral : ST3160023A atapi Port 0 ID 1
> >> DMA: On
> >> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
> >> DMA: On
> >> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 1
> >> DMA: On
> >> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0
> >> DMA: Off
> >>
> >> === CDRom-Device-Map ===
> >> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
> >> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
> >> AXV CD/DVD-ROM G: CDRom2
> >> =======================
> >>
> >> AutoRun : 1
> >> Excluded drive IDs:
> >> CmdQueuing : 1
> >> CmdNotification: 2
> >> WriteBufferSize: 83886080 (0) Byte
> >> ShowDrvBufStat : 0
> >> EraseSpeed : 0
> >> BUFE : 0
> >> Physical memory : 767MB (785904kB)
> >> Free physical memory: 376MB (385640kB)
> >> Memory in use : 50 %
> >> Uncached PFiles: 0x0
> >> Use Static Write Speed Table: 0
> >> Use Inquiry : 1
> >> Global Bus Type: default (0)
> >> Check supported media : Disabled (0)
> >>
> >> 22.7.2005
> >> CD-ROM (MP3)
> >> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
> >> Iso document burn settings
> >> ------------------------------------------
> >> Determine maximum speed : FALSE
> >> Simulate : FALSE
> >> Write : TRUE
> >> Finalize CD : TRUE
> >> Multisession : FALSE
> >> Burning mode : TAO
> >> Mode : 1
> >> ISO Level : 1 (Max. of 11 = 8 + 3 char)
> >> Character set : ISO 9660
> >> Joliet : TRUE
> >> Allow pathdepth more than 8 directories : TRUE
> >> Allow more than 255 characters in path : TRUE
> >> Write ISO9660 ;1 file extensions : TRUE
> >>
> >> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
> >> Buffer Underrun Protection activated
> >>
> >> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
> >> Reader running
> >>
> >> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
> >> Writer HL-DT-ST DVDRAM GSA-4081B running
> >>
> >> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
> >> First writeable address = 0 (0x00000000)
> >>
> >> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
> >> Turn on Track-at-once, using CD-R/RW media
> >>
> >> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
> >> Last possible write address on media: 359848 ( 79:59.73)
> >> Last address to be written: 290017 ( 64:28.67)
> >>
> >> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
> >> Write in overburning mode: NO (enabled: CD)
> >>
> >> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
> >> Recorder: HL-DT-ST DVDRAM GSA-4081B;
> >> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
> >> ATIP Data:
> >> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00
> >> 00
> >> 00 (LO 0:00.00)
> >> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid),
> >> 3:
> >> 00 00 00 (invalid)
> >>
> >> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
> >> >>> Protocol of DlgWaitCD activities: <<<
> >> =========================================
> >>
> >> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
> >> Setup items (after recorder preparation)
> >> 0: TRM_DATA_MODE1 (CTransferItem)
> >> 2 indices, index0 (150) not provided
> >> original disc pos #0 + 290018 (290018) = #290018/64:26.68
> >> relocatable, disc pos for caching/writing not required/required, no
> >> patch infos
> >> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> >> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
> >> --------------------------------------------------------------
> >>
> >> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
> >> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
> >> DAO infos:
> >> ==========
> >> MCN: ""
> >> TOCType: 0x00; Session Closed, disc fixated
> >> Tracks 1 to 1:
> >> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
> >> 594264064, ISRC ""
> >> DAO layout:
> >> ===========
> >> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
> >> -150 | lead-in | 0 | 0x00 | 0x41
> >> -150 | 1 | 0 | 0x00 | 0x41
> >> 0 | 1 | 1 | 0x00 | 0x41
> >> 290018 | lead-out | 1 | 0x00 | 0x41
> >>
> >> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
> >> Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.
> >>
> >> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
> >> Caching of files started
> >>
> >> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
> >> Cache writing successful.
> >>
> >> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
> >> Caching of files completed
> >>
> >> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
> >> Burn process started at 24x (3,600 KB/s)
> >>
> >> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
> >> Verifying disc position of item 0 (relocatable, disc pos, no patch
> >> infos,
> >> orig at #0): write at #0
> >>
> >> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
> >> Set BUFE: supported -> ON
> >>
> >> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
> >> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
> >> Status: 0x04 (0x01, SCSI_ERR)
> >> HA-Status 0x00 (0x00, OK)
> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> >> Sense Code: 0x09
> >> Sense Qual: 0x01
> >> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
> >> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> >> 0x34 0x10 0x04 0x80 0x09 0x01
> >>
> >> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
> >> Focus or tracking error
> >>
> >> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
> >> all writers idle, stopping conversion
> >>
> >> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
> >> conversion idle, stopping reader
> >>
> >> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
> >> SCSI Exec, HA 1, TA 0, LUN 0
> >> Status: 0x04 (0x01, SCSI_ERR)
> >> HA-Status 0x00 (0x00, OK)
> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> >> Sense Code: 0x09
> >> Sense Qual: 0x01
> >> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> >> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> >> 0x34 0x10 0x04 0x80 0x09 0x01
> >>
> >> 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
> >> Focus or tracking error
> >>
> >> 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
> >> Could not perform EndTrack
> >>
> >> 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
> >> Invalid write state
> >> HL-DT-ST DVDRAM GSA-4081B\H1 T0
> >>
> >> 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
> >> Could not perform EndTrack
> >>
> >> 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
> >> <HL-DT-STDVDRAM GSA-4081B> start Close Session
> >>
> >> 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
> >> Set remaining time: 0:00,000 (0ms) -> OK
> >>
> >> 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
> >> Burn process failed at 24x (3,600 KB/s)
> >>
> >>
> >> Existing drivers:
> >> File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
> >> 11/17/2004 9:16:48 AM
> >> File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
> >> 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
> >> File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
> >> size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
> >> File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504
> >> bytes,
> >> created 12/20/2003 8:03:42 PM (Adapter driver for src)
> >>
> >> Registry Keys:
> >> HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs
> >> :
> >> 0 (Security Option)
> >>
> >>
> >>
> >> --
> >>
> >> ======================================
> >>
> >> Learning to dislike children at a early age saves
> >> a lot of expense and aggravation later in life.
> >>
> >> =====================================
> >>
> >>
> >>
>
>
>

Mike · Jul 24, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Hi ! Again
Downloaded all 6 parts of Nero 6.6 and installed, still same problem.
If I delete the DVD writer from device manager and reboot will " found new
hardware " pick it up again and install drivers?
Could someone throw some light on " Focus or tracking error" below.
Could the lenses have moved, have used a cleaning disc.

> | 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
> | Focus or tracking error

Jaymon mentioned checking the "firmware' what is that?

Mike

"Carey Frisch [MVP]" <cnfrisch@nospamgmail.com> wrote in message
news:eQ1CbwvjFHA.3336@TK2MSFTNGP10.phx.gbl...
> Upgrade to the latest version (6.6) of Nero:
> http://ww2.nero.com/enu/nero-up.php
>
> --
> Carey Frisch
> Microsoft MVP
> Windows XP - Shell/User
> Microsoft Newsgroups
>
> Get Windows XP Service Pack 2 with Advanced Security Technologies:
> http://www.microsoft.com/athome/security/protect/windowsxp/choose.mspx
>
> -------------------------------------------------------------------------------------------
>
> "Mike" wrote:
>
> | help.....I know it's maybe the wrong NG, but could you help or direct
> | me to the right one.
> | This morning I tried to burn data to a DVD......only burnt the intro
> then
> | stopped with a error.
> | Tried again ... same thing...
> | Virus checked, spyware checked, all OK
> | Did a sfc scannow, did a system restore to 2 days ago.
> | Tried again, same results.
> | Un-installed Nero and removed all traces from registry.
> | Reloaded Nero.
> | Tried again, same results.
> | I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
> | I am adding the error message, I know its long but in other posts it has
> | been said that not enough info is given.
> | Nothing unusual happened at shutdown last night or bootup this morning.
> | Problems seem to start at 8:48:15 AM #21
> | I don't know how to interpret this data, hoping someone can help.
> | TIA
> | Thanks again
> | Mike
> |
> | ERROR
> | Windows XP 5.1
> | IA32
> | WinAspi: -
> | ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
> | size=160016 bytes, created 12/16/2003 8:18:06 PM
> | Nero version: 6.3.1.13 (Nero Express)
> | Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA
> 0 -
> | 6.3.1.13
> | Adapter driver: <atapi> HA 1
> | Drive buffer : 2048kB
> | Bus Type : default (0) -> ATAPI, detected: ATAPI
> | CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA
> 0 -
> | 6.3.1.13
> | Adapter driver: <xmasscsi> HA 2
> |
> | === Scsi-Device-Map ===
> | DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID
> 0
> | DMA: On
> | DiskPeripheral : ST3160023A atapi Port 0 ID
> 1
> | DMA: On
> | CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID
> 0
> | DMA: On
> | CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID
> 1
> | DMA: On
> | CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID
> 0
> | DMA: Off
> |
> | === CDRom-Device-Map ===
> | HL-DT-ST DVDRAM GSA-4081 D: CDRom0
> | HL-DT-ST RW/DVD GCC-4521 E: CDRom1
> | AXV CD/DVD-ROM G: CDRom2
> | =======================
> |
> | AutoRun : 1
> | Excluded drive IDs:
> | CmdQueuing : 1
> | CmdNotification: 2
> | WriteBufferSize: 83886080 (0) Byte
> | ShowDrvBufStat : 0
> | EraseSpeed : 0
> | BUFE : 0
> | Physical memory : 767MB (785904kB)
> | Free physical memory: 376MB (385640kB)
> | Memory in use : 50 %
> | Uncached PFiles: 0x0
> | Use Static Write Speed Table: 0
> | Use Inquiry : 1
> | Global Bus Type: default (0)
> | Check supported media : Disabled (0)
> |
> | 22.7.2005
> | CD-ROM (MP3)
> | 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
> | Iso document burn settings
> | ------------------------------------------
> | Determine maximum speed : FALSE
> | Simulate : FALSE
> | Write : TRUE
> | Finalize CD : TRUE
> | Multisession : FALSE
> | Burning mode : TAO
> | Mode : 1
> | ISO Level : 1 (Max. of 11 = 8 + 3 char)
> | Character set : ISO 9660
> | Joliet : TRUE
> | Allow pathdepth more than 8 directories : TRUE
> | Allow more than 255 characters in path : TRUE
> | Write ISO9660 ;1 file extensions : TRUE
> |
> | 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
> | Buffer Underrun Protection activated
> |
> | 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
> | Reader running
> |
> | 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
> | Writer HL-DT-ST DVDRAM GSA-4081B running
> |
> | 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
> | First writeable address = 0 (0x00000000)
> |
> | 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
> | Turn on Track-at-once, using CD-R/RW media
> |
> | 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
> | Last possible write address on media: 359848 ( 79:59.73)
> | Last address to be written: 290017 ( 64:28.67)
> |
> | 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
> | Write in overburning mode: NO (enabled: CD)
> |
> | 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
> | Recorder: HL-DT-ST DVDRAM GSA-4081B;
> | CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
> | ATIP Data:
> | Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00
> 00
> | 00 (LO 0:00.00)
> | Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid),
> 3:
> | 00 00 00 (invalid)
> |
> | 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
> | >>> Protocol of DlgWaitCD activities: <<<
> | =========================================
> |
> | 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
> | Setup items (after recorder preparation)
> | 0: TRM_DATA_MODE1 (CTransferItem)
> | 2 indices, index0 (150) not provided
> | original disc pos #0 + 290018 (290018) = #290018/64:26.68
> | relocatable, disc pos for caching/writing not required/required, no
> | patch infos
> | -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> | 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
> | --------------------------------------------------------------
> |
> | 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
> | Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
> | DAO infos:
> | ==========
> | MCN: ""
> | TOCType: 0x00; Session Closed, disc fixated
> | Tracks 1 to 1:
> | 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
> | 594264064, ISRC ""
> | DAO layout:
> | ===========
> | __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
> | -150 | lead-in | 0 | 0x00 | 0x41
> | -150 | 1 | 0 | 0x00 | 0x41
> | 0 | 1 | 1 | 0x00 | 0x41
> | 290018 | lead-out | 1 | 0x00 | 0x41
> |
> | 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
> | Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.
> |
> | 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
> | Caching of files started
> |
> | 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
> | Cache writing successful.
> |
> | 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
> | Caching of files completed
> |
> | 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
> | Burn process started at 24x (3,600 KB/s)
> |
> | 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
> | Verifying disc position of item 0 (relocatable, disc pos, no patch
> infos,
> | orig at #0): write at #0
> |
> | 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
> | Set BUFE: supported -> ON
> |
> | 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
> | SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
> | Status: 0x04 (0x01, SCSI_ERR)
> | HA-Status 0x00 (0x00, OK)
> | TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> | Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> | Sense Code: 0x09
> | Sense Qual: 0x01
> | CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
> | Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> | 0x34 0x10 0x04 0x80 0x09 0x01
> |
> | 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
> | Focus or tracking error
> |
> | 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
> | all writers idle, stopping conversion
> |
> | 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
> | conversion idle, stopping reader
> |
> | 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
> | SCSI Exec, HA 1, TA 0, LUN 0
> | Status: 0x04 (0x01, SCSI_ERR)
> | HA-Status 0x00 (0x00, OK)
> | TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> | Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> | Sense Code: 0x09
> | Sense Qual: 0x01
> | CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> | Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> | 0x34 0x10 0x04 0x80 0x09 0x01
> |
> | 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
> | Focus or tracking error
> |
> | 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
> | Could not perform EndTrack
> |
> | 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
> | Invalid write state
> | HL-DT-ST DVDRAM GSA-4081B\H1 T0
> |
> | 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
> | Could not perform EndTrack
> |
> | 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
> | <HL-DT-STDVDRAM GSA-4081B> start Close Session
> |
> | 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
> | Set remaining time: 0:00,000 (0ms) -> OK
> |
> | 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
> | Burn process failed at 24x (3,600 KB/s)
> |
> |
> | Existing drivers:
> | File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
> | 11/17/2004 9:16:48 AM
> | File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
> | 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
> | File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
> | size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
> | File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504
> bytes,
> | created 12/20/2003 8:03:42 PM (Adapter driver for src)
> |
> | Registry Keys:
> | HKLM\Software\Microsoft\Windows
> NT\CurrentVersion\WinLogon\AllocateCDROMs :
> | 0 (Security Option)
>

Mike · Jul 24, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Both drives are LG
Did have Nero Info Tool, was downloaded in the Nero 6.6 packet, but did not
now what it was for.

Results of Nero Info Tool

DVD Writer
ID String [1:0] D:\ DT-ST DVDRAM GSA 4081B
Firmware A100

DVD Player
ID String [1:0] E:\ Hl-DT-ST RW/DVD GCC-4521B
Firmware 1.05

Question
Should both firmware's be the same?

Will check LG website.
Will be back later
Mike

"Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
news:EE12BF4D-CA5B-4978-BE12-42A9790C77B6@microsoft.com...
> No, I don't mean drivers... The firmware is info that is on a chip in the
> unit itself, like a bios chip on the motherboard. Ok, to check your
> firmware
> version go here and get nero info tool.
> http://www.iomagic.com/Firmware/NeroInfotool/NeroInfoTool_221.zip
> and go here to see how to read the drive string and firmware ver.
> http://www.iomagic.com/Firmware/NeroInfotool/neroinfotool.html
> and post your results or go to the recorder drives OEM web site to see if
> a
> firmware update is available.
>
> j;-)
>
>
> "Mike" wrote:
>
>> e reply.
>> "You may need to update the firmware for the RW drive "
>> What is firmware? do you mean drivers?
>> The DVD writer only came with a Nero disk.
>> Mike
>>
>>
>> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
>> news:391953C4-81EE-4150-90F9-3EB9EC2CB169@microsoft.com...
>> > You may need to update the firmware for the RW drive if updating Nero
>> > fails
>> > to solve the problem. Nero 5.5 works just fine now, after I updated my
>> > firmware.
>> >
>> > j;-)
>> >
>> > "Mike" wrote:
>> >
>> >> help.....I know it's maybe the wrong NG, but could you help or direct
>> >> me to the right one.
>> >> This morning I tried to burn data to a DVD......only burnt the intro
>> >> then
>> >> stopped with a error.
>> >> Tried again ... same thing...
>> >> Virus checked, spyware checked, all OK
>> >> Did a sfc scannow, did a system restore to 2 days ago.
>> >> Tried again, same results.
>> >> Un-installed Nero and removed all traces from registry.
>> >> Reloaded Nero.
>> >> Tried again, same results.
>> >> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
>> >> I am adding the error message, I know its long but in other posts it
>> >> has
>> >> been said that not enough info is given.
>> >> Nothing unusual happened at shutdown last night or bootup this
>> >> morning.
>> >> Problems seem to start at 8:48:15 AM #21
>> >> I don't know how to interpret this data, hoping someone can help.
>> >> TIA
>> >> Thanks again
>> >> Mike
>> >>
>> >> ERROR
>> >> Windows XP 5.1
>> >> IA32
>> >> WinAspi: -
>> >> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll':
>> >> Ver=2.0.1.59,
>> >> size=160016 bytes, created 12/16/2003 8:18:06 PM
>> >> Nero version: 6.3.1.13 (Nero Express)
>> >> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1
>> >> TA
>> >> 0 -
>> >> 6.3.1.13
>> >> Adapter driver: <atapi> HA 1
>> >> Drive buffer : 2048kB
>> >> Bus Type : default (0) -> ATAPI, detected: ATAPI
>> >> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2
>> >> TA
>> >> 0 -
>> >> 6.3.1.13
>> >> Adapter driver: <xmasscsi> HA 2
>> >>
>> >> === Scsi-Device-Map ===
>> >> DiskPeripheral : Maxtor 6Y080L0 atapi Port 0
>> >> ID 0
>> >> DMA: On
>> >> DiskPeripheral : ST3160023A atapi Port 0
>> >> ID 1
>> >> DMA: On
>> >> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1
>> >> ID 0
>> >> DMA: On
>> >> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1
>> >> ID 1
>> >> DMA: On
>> >> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2
>> >> ID 0
>> >> DMA: Off
>> >>
>> >> === CDRom-Device-Map ===
>> >> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
>> >> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
>> >> AXV CD/DVD-ROM G: CDRom2
>> >> =======================
>> >>
>> >> AutoRun : 1
>> >> Excluded drive IDs:
>> >> CmdQueuing : 1
>> >> CmdNotification: 2
>> >> WriteBufferSize: 83886080 (0) Byte
>> >> ShowDrvBufStat : 0
>> >> EraseSpeed : 0
>> >> BUFE : 0
>> >> Physical memory : 767MB (785904kB)
>> >> Free physical memory: 376MB (385640kB)
>> >> Memory in use : 50 %
>> >> Uncached PFiles: 0x0
>> >> Use Static Write Speed Table: 0
>> >> Use Inquiry : 1
>> >> Global Bus Type: default (0)
>> >> Check supported media : Disabled (0)
>> >>
>> >> 22.7.2005
>> >> CD-ROM (MP3)
>> >> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
>> >> Iso document burn settings
>> >> ------------------------------------------
>> >> Determine maximum speed : FALSE
>> >> Simulate : FALSE
>> >> Write : TRUE
>> >> Finalize CD : TRUE
>> >> Multisession : FALSE
>> >> Burning mode : TAO
>> >> Mode : 1
>> >> ISO Level : 1 (Max. of 11 = 8 + 3 char)
>> >> Character set : ISO 9660
>> >> Joliet : TRUE
>> >> Allow pathdepth more than 8 directories : TRUE
>> >> Allow more than 255 characters in path : TRUE
>> >> Write ISO9660 ;1 file extensions : TRUE
>> >>
>> >> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
>> >> Buffer Underrun Protection activated
>> >>
>> >> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
>> >> Reader running
>> >>
>> >> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
>> >> Writer HL-DT-ST DVDRAM GSA-4081B running
>> >>
>> >> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
>> >> First writeable address = 0 (0x00000000)
>> >>
>> >> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
>> >> Turn on Track-at-once, using CD-R/RW media
>> >>
>> >> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
>> >> Last possible write address on media: 359848 ( 79:59.73)
>> >> Last address to be written: 290017 ( 64:28.67)
>> >>
>> >> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
>> >> Write in overburning mode: NO (enabled: CD)
>> >>
>> >> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
>> >> Recorder: HL-DT-ST DVDRAM GSA-4081B;
>> >> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
>> >> ATIP Data:
>> >> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3:
>> >> 00
>> >> 00
>> >> 00 (LO 0:00.00)
>> >> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00
>> >> (invalid),
>> >> 3:
>> >> 00 00 00 (invalid)
>> >>
>> >> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
>> >> >>> Protocol of DlgWaitCD activities: <<<
>> >> =========================================
>> >>
>> >> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
>> >> Setup items (after recorder preparation)
>> >> 0: TRM_DATA_MODE1 (CTransferItem)
>> >> 2 indices, index0 (150) not provided
>> >> original disc pos #0 + 290018 (290018) = #290018/64:26.68
>> >> relocatable, disc pos for caching/writing not required/required,
>> >> no
>> >> patch infos
>> >> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
>> >> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
>> >> --------------------------------------------------------------
>> >>
>> >> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
>> >> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
>> >> DAO infos:
>> >> ==========
>> >> MCN: ""
>> >> TOCType: 0x00; Session Closed, disc fixated
>> >> Tracks 1 to 1:
>> >> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
>> >> 594264064, ISRC ""
>> >> DAO layout:
>> >> ===========
>> >> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
>> >> -150 | lead-in | 0 | 0x00 | 0x41
>> >> -150 | 1 | 0 | 0x00 | 0x41
>> >> 0 | 1 | 1 | 0x00 | 0x41
>> >> 290018 | lead-out | 1 | 0x00 | 0x41
>> >>
>> >> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
>> >> Removed 2 run-out blocks from end of track 1. Length: 290018 ->
>> >> 290016.
>> >>
>> >> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
>> >> Caching of files started
>> >>
>> >> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
>> >> Cache writing successful.
>> >>
>> >> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
>> >> Caching of files completed
>> >>
>> >> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
>> >> Burn process started at 24x (3,600 KB/s)
>> >>
>> >> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
>> >> Verifying disc position of item 0 (relocatable, disc pos, no patch
>> >> infos,
>> >> orig at #0): write at #0
>> >>
>> >> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
>> >> Set BUFE: supported -> ON
>> >>
>> >> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
>> >> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
>> >> Status: 0x04 (0x01, SCSI_ERR)
>> >> HA-Status 0x00 (0x00, OK)
>> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>> >> Sense Code: 0x09
>> >> Sense Qual: 0x01
>> >> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00
>> >> 0x00
>> >> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>> >> 0x34 0x10 0x04 0x80 0x09 0x01
>> >>
>> >> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
>> >> Focus or tracking error
>> >>
>> >> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
>> >> all writers idle, stopping conversion
>> >>
>> >> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
>> >> conversion idle, stopping reader
>> >>
>> >> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
>> >> SCSI Exec, HA 1, TA 0, LUN 0
>> >> Status: 0x04 (0x01, SCSI_ERR)
>> >> HA-Status 0x00 (0x00, OK)
>> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>> >> Sense Code: 0x09
>> >> Sense Qual: 0x01
>> >> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>> >> 0x00
>> >> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>> >> 0x34 0x10 0x04 0x80 0x09 0x01
>> >>
>> >> 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
>> >> Focus or tracking error
>> >>
>> >> 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
>> >> Could not perform EndTrack
>> >>
>> >> 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
>> >> Invalid write state
>> >> HL-DT-ST DVDRAM GSA-4081B\H1 T0
>> >>
>> >> 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
>> >> Could not perform EndTrack
>> >>
>> >> 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
>> >> <HL-DT-STDVDRAM GSA-4081B> start Close Session
>> >>
>> >> 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
>> >> Set remaining time: 0:00,000 (0ms) -> OK
>> >>
>> >> 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
>> >> Burn process failed at 24x (3,600 KB/s)
>> >>
>> >>
>> >> Existing drivers:
>> >> File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
>> >> 11/17/2004 9:16:48 AM
>> >> File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
>> >> 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
>> >> File 'Drivers\atapi.sys': Ver=5.1.2600.2180
>> >> (xpsp_sp2_rtm.040803-2158),
>> >> size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for
>> >> rec)
>> >> File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504
>> >> bytes,
>> >> created 12/20/2003 8:03:42 PM (Adapter driver for src)
>> >>
>> >> Registry Keys:
>> >> HKLM\Software\Microsoft\Windows
>> >> NT\CurrentVersion\WinLogon\AllocateCDROMs
>> >> :
>> >> 0 (Security Option)
>> >>
>> >>
>> >>
>> >> --
>> >>
>> >> ======================================
>> >>
>> >> Learning to dislike children at a early age saves
>> >> a lot of expense and aggravation later in life.
>> >>
>> >> =====================================
>> >>
>> >>
>> >>
>>
>>
>>

Guest · Jul 24, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Ok, both firmwares don't and will not be unless the drives are identical. The
firmware will be unique to the drives model#/id string. I would recommend you
contact a customer service tech and give them the ID string and firmware ver
as posted here and let them give you a link to the update.

There are firmware hacks and patches that can harm your drives and void any
warranties or make it impossible to re-flash the proper firmware update, so,
be careful..

j;-)

"Mike" wrote:

> Both drives are LG
> Did have Nero Info Tool, was downloaded in the Nero 6.6 packet, but did not
> now what it was for.
>
> Results of Nero Info Tool
>
> DVD Writer
> ID String [1:0] D:\ DT-ST DVDRAM GSA 4081B
> Firmware A100
>
> DVD Player
> ID String [1:0] E:\ Hl-DT-ST RW/DVD GCC-4521B
> Firmware 1.05
>
> Question
> Should both firmware's be the same?
>
> Will check LG website.
> Will be back later
> Mike
>
> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
> news:EE12BF4D-CA5B-4978-BE12-42A9790C77B6@microsoft.com...
> > No, I don't mean drivers... The firmware is info that is on a chip in the
> > unit itself, like a bios chip on the motherboard. Ok, to check your
> > firmware
> > version go here and get nero info tool.
> > http://www.iomagic.com/Firmware/NeroInfotool/NeroInfoTool_221.zip
> > and go here to see how to read the drive string and firmware ver.
> > http://www.iomagic.com/Firmware/NeroInfotool/neroinfotool.html
> > and post your results or go to the recorder drives OEM web site to see if
> > a
> > firmware update is available.
> >
> > j;-)
> >
> >
> > "Mike" wrote:
> >
> >> e reply.
> >> "You may need to update the firmware for the RW drive "
> >> What is firmware? do you mean drivers?
> >> The DVD writer only came with a Nero disk.
> >> Mike
> >>
> >>
> >> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
> >> news:391953C4-81EE-4150-90F9-3EB9EC2CB169@microsoft.com...
> >> > You may need to update the firmware for the RW drive if updating Nero
> >> > fails
> >> > to solve the problem. Nero 5.5 works just fine now, after I updated my
> >> > firmware.
> >> >
> >> > j;-)
> >> >
> >> > "Mike" wrote:
> >> >
> >> >> help.....I know it's maybe the wrong NG, but could you help or direct
> >> >> me to the right one.
> >> >> This morning I tried to burn data to a DVD......only burnt the intro
> >> >> then
> >> >> stopped with a error.
> >> >> Tried again ... same thing...
> >> >> Virus checked, spyware checked, all OK
> >> >> Did a sfc scannow, did a system restore to 2 days ago.
> >> >> Tried again, same results.
> >> >> Un-installed Nero and removed all traces from registry.
> >> >> Reloaded Nero.
> >> >> Tried again, same results.
> >> >> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
> >> >> I am adding the error message, I know its long but in other posts it
> >> >> has
> >> >> been said that not enough info is given.
> >> >> Nothing unusual happened at shutdown last night or bootup this
> >> >> morning.
> >> >> Problems seem to start at 8:48:15 AM #21
> >> >> I don't know how to interpret this data, hoping someone can help.
> >> >> TIA
> >> >> Thanks again
> >> >> Mike
> >> >>
> >> >> ERROR
> >> >> Windows XP 5.1
> >> >> IA32
> >> >> WinAspi: -
> >> >> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll':
> >> >> Ver=2.0.1.59,
> >> >> size=160016 bytes, created 12/16/2003 8:18:06 PM
> >> >> Nero version: 6.3.1.13 (Nero Express)
> >> >> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1
> >> >> TA
> >> >> 0 -
> >> >> 6.3.1.13
> >> >> Adapter driver: <atapi> HA 1
> >> >> Drive buffer : 2048kB
> >> >> Bus Type : default (0) -> ATAPI, detected: ATAPI
> >> >> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2
> >> >> TA
> >> >> 0 -
> >> >> 6.3.1.13
> >> >> Adapter driver: <xmasscsi> HA 2
> >> >>
> >> >> === Scsi-Device-Map ===
> >> >> DiskPeripheral : Maxtor 6Y080L0 atapi Port 0
> >> >> ID 0
> >> >> DMA: On
> >> >> DiskPeripheral : ST3160023A atapi Port 0
> >> >> ID 1
> >> >> DMA: On
> >> >> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1
> >> >> ID 0
> >> >> DMA: On
> >> >> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1
> >> >> ID 1
> >> >> DMA: On
> >> >> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2
> >> >> ID 0
> >> >> DMA: Off
> >> >>
> >> >> === CDRom-Device-Map ===
> >> >> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
> >> >> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
> >> >> AXV CD/DVD-ROM G: CDRom2
> >> >> =======================
> >> >>
> >> >> AutoRun : 1
> >> >> Excluded drive IDs:
> >> >> CmdQueuing : 1
> >> >> CmdNotification: 2
> >> >> WriteBufferSize: 83886080 (0) Byte
> >> >> ShowDrvBufStat : 0
> >> >> EraseSpeed : 0
> >> >> BUFE : 0
> >> >> Physical memory : 767MB (785904kB)
> >> >> Free physical memory: 376MB (385640kB)
> >> >> Memory in use : 50 %
> >> >> Uncached PFiles: 0x0
> >> >> Use Static Write Speed Table: 0
> >> >> Use Inquiry : 1
> >> >> Global Bus Type: default (0)
> >> >> Check supported media : Disabled (0)
> >> >>
> >> >> 22.7.2005
> >> >> CD-ROM (MP3)
> >> >> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
> >> >> Iso document burn settings
> >> >> ------------------------------------------
> >> >> Determine maximum speed : FALSE
> >> >> Simulate : FALSE
> >> >> Write : TRUE
> >> >> Finalize CD : TRUE
> >> >> Multisession : FALSE
> >> >> Burning mode : TAO
> >> >> Mode : 1
> >> >> ISO Level : 1 (Max. of 11 = 8 + 3 char)
> >> >> Character set : ISO 9660
> >> >> Joliet : TRUE
> >> >> Allow pathdepth more than 8 directories : TRUE
> >> >> Allow more than 255 characters in path : TRUE
> >> >> Write ISO9660 ;1 file extensions : TRUE
> >> >>
> >> >> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
> >> >> Buffer Underrun Protection activated
> >> >>
> >> >> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
> >> >> Reader running
> >> >>
> >> >> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
> >> >> Writer HL-DT-ST DVDRAM GSA-4081B running
> >> >>
> >> >> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
> >> >> First writeable address = 0 (0x00000000)
> >> >>
> >> >> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
> >> >> Turn on Track-at-once, using CD-R/RW media
> >> >>
> >> >> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
> >> >> Last possible write address on media: 359848 ( 79:59.73)
> >> >> Last address to be written: 290017 ( 64:28.67)
> >> >>
> >> >> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
> >> >> Write in overburning mode: NO (enabled: CD)
> >> >>
> >> >> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
> >> >> Recorder: HL-DT-ST DVDRAM GSA-4081B;
> >> >> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
> >> >> ATIP Data:
> >> >> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3:
> >> >> 00
> >> >> 00
> >> >> 00 (LO 0:00.00)
> >> >> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00
> >> >> (invalid),
> >> >> 3:
> >> >> 00 00 00 (invalid)
> >> >>
> >> >> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
> >> >> >>> Protocol of DlgWaitCD activities: <<<
> >> >> =========================================
> >> >>
> >> >> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
> >> >> Setup items (after recorder preparation)
> >> >> 0: TRM_DATA_MODE1 (CTransferItem)
> >> >> 2 indices, index0 (150) not provided
> >> >> original disc pos #0 + 290018 (290018) = #290018/64:26.68
> >> >> relocatable, disc pos for caching/writing not required/required,
> >> >> no
> >> >> patch infos
> >> >> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> >> >> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
> >> >> --------------------------------------------------------------
> >> >>
> >> >> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
> >> >> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
> >> >> DAO infos:
> >> >> ==========
> >> >> MCN: ""
> >> >> TOCType: 0x00; Session Closed, disc fixated
> >> >> Tracks 1 to 1:
> >> >> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
> >> >> 594264064, ISRC ""
> >> >> DAO layout:
> >> >> ===========
> >> >> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
> >> >> -150 | lead-in | 0 | 0x00 | 0x41
> >> >> -150 | 1 | 0 | 0x00 | 0x41
> >> >> 0 | 1 | 1 | 0x00 | 0x41
> >> >> 290018 | lead-out | 1 | 0x00 | 0x41
> >> >>
> >> >> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
> >> >> Removed 2 run-out blocks from end of track 1. Length: 290018 ->
> >> >> 290016.
> >> >>
> >> >> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
> >> >> Caching of files started
> >> >>
> >> >> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
> >> >> Cache writing successful.
> >> >>
> >> >> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
> >> >> Caching of files completed
> >> >>
> >> >> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
> >> >> Burn process started at 24x (3,600 KB/s)
> >> >>
> >> >> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
> >> >> Verifying disc position of item 0 (relocatable, disc pos, no patch
> >> >> infos,
> >> >> orig at #0): write at #0
> >> >>
> >> >> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
> >> >> Set BUFE: supported -> ON
> >> >>
> >> >> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
> >> >> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
> >> >> Status: 0x04 (0x01, SCSI_ERR)
> >> >> HA-Status 0x00 (0x00, OK)
> >> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> >> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> >> >> Sense Code: 0x09
> >> >> Sense Qual: 0x01
> >> >> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00
> >> >> 0x00
> >> >> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> >> >> 0x34 0x10 0x04 0x80 0x09 0x01
> >> >>
> >> >> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
> >> >> Focus or tracking error
> >> >>
> >> >> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
> >> >> all writers idle, stopping conversion
> >> >>
> >> >> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
> >> >> conversion idle, stopping reader
> >> >>
> >> >> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
> >> >> SCSI Exec, HA 1, TA 0, LUN 0
> >> >> Status: 0x04 (0x01, SCSI_ERR)
> >> >> HA-Status 0x00 (0x00, OK)
> >> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> >> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> >> >> Sense Code: 0x09
> >> >> Sense Qual: 0x01
> >> >> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> >> >> 0x00
> >> >> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> >> >> 0x34 0x10 0x04 0x80 0x09 0x01
> >> >>
> >> >> 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
> >> >> Focus or tracking error
> >> >>
> >> >> 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
> >> >> Could not perform EndTrack
> >> >>
> >> >> 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
> >> >> Invalid write state
> >> >> HL-DT-ST DVDRAM GSA-4081B\H1 T0
> >> >>
> >> >> 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
> >> >> Could not perform EndTrack

Mike · Jul 24, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

for DT-ST DVDRAM GSA 4081B
Came up with this site
http://club.cdfreaks.com/showthread.php?t=88669
Seems this is a common problem
Downloaded new firmware A1041
Will install
Will keep you informed
Can not try to burn, no more blank DVD,s
Mike

"Mike" <mikevandermerwe@absamail.co.za> wrote in message
news:N-CdnTRNTpr35X7fRVn-gA@is.co.za...
> Both drives are LG
> Did have Nero Info Tool, was downloaded in the Nero 6.6 packet, but did
> not now what it was for.
>
> Results of Nero Info Tool
>
> DVD Writer
> ID String [1:0] D:\ DT-ST DVDRAM GSA 4081B
> Firmware A100
>
> DVD Player
> ID String [1:0] E:\ Hl-DT-ST RW/DVD GCC-4521B
> Firmware 1.05
>
> Question
> Should both firmware's be the same?
>
> Will check LG website.
> Will be back later
> Mike
>
> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
> news:EE12BF4D-CA5B-4978-BE12-42A9790C77B6@microsoft.com...
>> No, I don't mean drivers... The firmware is info that is on a chip in the
>> unit itself, like a bios chip on the motherboard. Ok, to check your
>> firmware
>> version go here and get nero info tool.
>> http://www.iomagic.com/Firmware/NeroInfotool/NeroInfoTool_221.zip
>> and go here to see how to read the drive string and firmware ver.
>> http://www.iomagic.com/Firmware/NeroInfotool/neroinfotool.html
>> and post your results or go to the recorder drives OEM web site to see if
>> a
>> firmware update is available.
>>
>> j;-)
>>
>>
>> "Mike" wrote:
>>
>>> e reply.
>>> "You may need to update the firmware for the RW drive "
>>> What is firmware? do you mean drivers?
>>> The DVD writer only came with a Nero disk.
>>> Mike
>>>
>>>
>>> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
>>> news:391953C4-81EE-4150-90F9-3EB9EC2CB169@microsoft.com...
>>> > You may need to update the firmware for the RW drive if updating Nero
>>> > fails
>>> > to solve the problem. Nero 5.5 works just fine now, after I updated my
>>> > firmware.
>>> >
>>> > j;-)
>>> >
>>> > "Mike" wrote:
>>> >
>>> >> help.....I know it's maybe the wrong NG, but could you help or direct
>>> >> me to the right one.
>>> >> This morning I tried to burn data to a DVD......only burnt the intro
>>> >> then
>>> >> stopped with a error.
>>> >> Tried again ... same thing...
>>> >> Virus checked, spyware checked, all OK
>>> >> Did a sfc scannow, did a system restore to 2 days ago.
>>> >> Tried again, same results.
>>> >> Un-installed Nero and removed all traces from registry.
>>> >> Reloaded Nero.
>>> >> Tried again, same results.
>>> >> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
>>> >> I am adding the error message, I know its long but in other posts it
>>> >> has
>>> >> been said that not enough info is given.
>>> >> Nothing unusual happened at shutdown last night or bootup this
>>> >> morning.
>>> >> Problems seem to start at 8:48:15 AM #21
>>> >> I don't know how to interpret this data, hoping someone can help.
>>> >> TIA
>>> >> Thanks again
>>> >> Mike
>>> >>
>>> >> ERROR
>>> >> Windows XP 5.1
>>> >> IA32
>>> >> WinAspi: -
>>> >> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll':
>>> >> Ver=2.0.1.59,
>>> >> size=160016 bytes, created 12/16/2003 8:18:06 PM
>>> >> Nero version: 6.3.1.13 (Nero Express)
>>> >> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1
>>> >> TA
>>> >> 0 -
>>> >> 6.3.1.13
>>> >> Adapter driver: <atapi> HA 1
>>> >> Drive buffer : 2048kB
>>> >> Bus Type : default (0) -> ATAPI, detected: ATAPI
>>> >> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2
>>> >> TA
>>> >> 0 -
>>> >> 6.3.1.13
>>> >> Adapter driver: <xmasscsi> HA 2
>>> >>
>>> >> === Scsi-Device-Map ===
>>> >> DiskPeripheral : Maxtor 6Y080L0 atapi Port 0
>>> >> ID 0
>>> >> DMA: On
>>> >> DiskPeripheral : ST3160023A atapi Port 0
>>> >> ID 1
>>> >> DMA: On
>>> >> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1
>>> >> ID 0
>>> >> DMA: On
>>> >> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1
>>> >> ID 1
>>> >> DMA: On
>>> >> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2
>>> >> ID 0
>>> >> DMA: Off
>>> >>
>>> >> === CDRom-Device-Map ===
>>> >> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
>>> >> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
>>> >> AXV CD/DVD-ROM G: CDRom2
>>> >> =======================
>>> >>
>>> >> AutoRun : 1
>>> >> Excluded drive IDs:
>>> >> CmdQueuing : 1
>>> >> CmdNotification: 2
>>> >> WriteBufferSize: 83886080 (0) Byte
>>> >> ShowDrvBufStat : 0
>>> >> EraseSpeed : 0
>>> >> BUFE : 0
>>> >> Physical memory : 767MB (785904kB)
>>> >> Free physical memory: 376MB (385640kB)
>>> >> Memory in use : 50 %
>>> >> Uncached PFiles: 0x0
>>> >> Use Static Write Speed Table: 0
>>> >> Use Inquiry : 1
>>> >> Global Bus Type: default (0)
>>> >> Check supported media : Disabled (0)
>>> >>
>>> >> 22.7.2005
>>> >> CD-ROM (MP3)
>>> >> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
>>> >> Iso document burn settings
>>> >> ------------------------------------------
>>> >> Determine maximum speed : FALSE
>>> >> Simulate : FALSE
>>> >> Write : TRUE
>>> >> Finalize CD : TRUE
>>> >> Multisession : FALSE
>>> >> Burning mode : TAO
>>> >> Mode : 1
>>> >> ISO Level : 1 (Max. of 11 = 8 + 3 char)
>>> >> Character set : ISO 9660
>>> >> Joliet : TRUE
>>> >> Allow pathdepth more than 8 directories : TRUE
>>> >> Allow more than 255 characters in path : TRUE
>>> >> Write ISO9660 ;1 file extensions : TRUE
>>> >>
>>> >> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
>>> >> Buffer Underrun Protection activated
>>> >>
>>> >> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
>>> >> Reader running
>>> >>
>>> >> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
>>> >> Writer HL-DT-ST DVDRAM GSA-4081B running
>>> >>
>>> >> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
>>> >> First writeable address = 0 (0x00000000)
>>> >>
>>> >> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
>>> >> Turn on Track-at-once, using CD-R/RW media
>>> >>
>>> >> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
>>> >> Last possible write address on media: 359848 ( 79:59.73)
>>> >> Last address to be written: 290017 ( 64:28.67)
>>> >>
>>> >> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
>>> >> Write in overburning mode: NO (enabled: CD)
>>> >>
>>> >> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
>>> >> Recorder: HL-DT-ST DVDRAM GSA-4081B;
>>> >> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics
>>> >> Corporation
>>> >> ATIP Data:
>>> >> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3:
>>> >> 00
>>> >> 00
>>> >> 00 (LO 0:00.00)
>>> >> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00
>>> >> (invalid),
>>> >> 3:
>>> >> 00 00 00 (invalid)
>>> >>
>>> >> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> >> >>> Protocol of DlgWaitCD activities: <<<
>>> >> =========================================
>>> >>
>>> >> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
>>> >> Setup items (after recorder preparation)
>>> >> 0: TRM_DATA_MODE1 (CTransferItem)
>>> >> 2 indices, index0 (150) not provided
>>> >> original disc pos #0 + 290018 (290018) = #290018/64:26.68
>>> >> relocatable, disc pos for caching/writing not required/required,
>>> >> no
>>> >> patch infos
>>> >> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,
>>> >> length
>>> >> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
>>> >> --------------------------------------------------------------
>>> >>
>>> >> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
>>> >> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
>>> >> DAO infos:
>>> >> ==========
>>> >> MCN: ""
>>> >> TOCType: 0x00; Session Closed, disc fixated
>>> >> Tracks 1 to 1:
>>> >> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
>>> >> 594264064, ISRC ""
>>> >> DAO layout:
>>> >> ===========
>>> >> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
>>> >> -150 | lead-in | 0 | 0x00 | 0x41
>>> >> -150 | 1 | 0 | 0x00 | 0x41
>>> >> 0 | 1 | 1 | 0x00 | 0x41
>>> >> 290018 | lead-out | 1 | 0x00 | 0x41
>>> >>
>>> >> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
>>> >> Removed 2 run-out blocks from end of track 1. Length: 290018 ->
>>> >> 290016.
>>> >>
>>> >> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
>>> >> Caching of files started
>>> >>
>>> >> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
>>> >> Cache writing successful.
>>> >>
>>> >> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
>>> >> Caching of files completed
>>> >>
>>> >> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
>>> >> Burn process started at 24x (3,600 KB/s)
>>> >>
>>> >> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
>>> >> Verifying disc position of item 0 (relocatable, disc pos, no patch
>>> >> infos,
>>> >> orig at #0): write at #0
>>> >>
>>> >> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
>>> >> Set BUFE: supported -> ON
>>> >>
>>> >> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
>>> >> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
>>> >> Status: 0x04 (0x01, SCSI_ERR)
>>> >> HA-Status 0x00 (0x00, OK)
>>> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>>> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>>> >> Sense Code: 0x09
>>> >> Sense Qual: 0x01
>>> >> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00
>>> >> 0x00
>>> >> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>>> >> 0x34 0x10 0x04 0x80 0x09 0x01
>>> >>
>>> >> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
>>> >> Focus or tracking error
>>> >>
>>> >> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
>>> >> all writers idle, stopping conversion
>>> >>
>>> >> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
>>> >> conversion idle, stopping reader
>>> >>
>>> >> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
>>> >> SCSI Exec, HA 1, TA 0, LUN 0
>>> >> Status: 0x04 (0x01, SCSI_ERR)
>>> >> HA-Status 0x00 (0x00, OK)
>>> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>>> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>>> >> Sense Code: 0x09
>>> >> Sense Qual: 0x01
>>> >> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>>> >> 0x00
>>> >> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>>> >> 0x34 0x10 0x04 0x80 0x09 0x01
>>> >>
>>> >> 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
>>> >> Focus or tracking error
>>> >>
>>> >> 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
>>> >> Could not perform EndTrack
>>> >>
>>> >> 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
>>> >> Invalid write state
>>> >> HL-DT-ST DVDRAM GSA-4081B\H1 T0
>>> >>
>>> >> 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
>>> >> Could not perform EndTrack
>>> >>
>>> >> 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
>>> >> <HL-DT-STDVDRAM GSA-4081B> start Close Session
>>> >>
>>> >> 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
>>> >> Set remaining time: 0:00,000 (0ms) -> OK
>>> >>
>>> >> 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
>>> >> Burn process failed at 24x (3,600 KB/s)
>>> >>
>>> >>
>>> >> Existing drivers:
>>> >> File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes,
>>> >> created
>>> >> 11/17/2004 9:16:48 AM
>>> >> File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
>>> >> 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
>>> >> File 'Drivers\atapi.sys': Ver=5.1.2600.2180
>>> >> (xpsp_sp2_rtm.040803-2158),
>>> >> size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for
>>> >> rec)
>>> >> File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504
>>> >> bytes,
>>> >> created 12/20/2003 8:03:42 PM (Adapter driver for src)
>>> >>
>>> >> Registry Keys:
>>> >> HKLM\Software\Microsoft\Windows
>>> >> NT\CurrentVersion\WinLogon\AllocateCDROMs
>>> >> :
>>> >> 0 (Security Option)
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >>
>>> >> ======================================
>>> >>
>>> >> Learning to dislike children at a early age saves
>>> >> a lot of expense and aggravation later in life.
>>> >>
>>> >> =====================================
>>> >>
>>> >>
>>> >>
>>>
>>>
>>>
>
>

Guest · Jul 24, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

I am not sure where you are ie country, but if in the USA see the link below:
http://www.lge.com/support/gcscWrite.jsp
Or, if in another country see the link below and add your location:
http://www.lge.com/support/online_cust_serv.jsp

I think it would be wise to let their customer representative confirm the
proper firmware update for your devices, if they are needed or even available
for one or both drives.

j;-)

"Mike" wrote:

> for DT-ST DVDRAM GSA 4081B
> Came up with this site
> http://club.cdfreaks.com/showthread.php?t=88669
> Seems this is a common problem
> Downloaded new firmware A1041
> Will install
> Will keep you informed
> Can not try to burn, no more blank DVD,s
> Mike
>
> "Mike" <mikevandermerwe@absamail.co.za> wrote in message
> news:N-CdnTRNTpr35X7fRVn-gA@is.co.za...
> > Both drives are LG
> > Did have Nero Info Tool, was downloaded in the Nero 6.6 packet, but did
> > not now what it was for.
> >
> > Results of Nero Info Tool
> >
> > DVD Writer
> > ID String [1:0] D:\ DT-ST DVDRAM GSA 4081B
> > Firmware A100
> >
> > DVD Player
> > ID String [1:0] E:\ Hl-DT-ST RW/DVD GCC-4521B
> > Firmware 1.05
> >
> > Question
> > Should both firmware's be the same?
> >
> > Will check LG website.
> > Will be back later
> > Mike
> >
> > "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
> > news:EE12BF4D-CA5B-4978-BE12-42A9790C77B6@microsoft.com...
> >> No, I don't mean drivers... The firmware is info that is on a chip in the
> >> unit itself, like a bios chip on the motherboard. Ok, to check your
> >> firmware
> >> version go here and get nero info tool.
> >> http://www.iomagic.com/Firmware/NeroInfotool/NeroInfoTool_221.zip
> >> and go here to see how to read the drive string and firmware ver.
> >> http://www.iomagic.com/Firmware/NeroInfotool/neroinfotool.html
> >> and post your results or go to the recorder drives OEM web site to see if
> >> a
> >> firmware update is available.
> >>
> >> j;-)
> >>
> >>
> >> "Mike" wrote:
> >>
> >>> e reply.
> >>> "You may need to update the firmware for the RW drive "
> >>> What is firmware? do you mean drivers?
> >>> The DVD writer only came with a Nero disk.
> >>> Mike
> >>>
> >>>
> >>> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
> >>> news:391953C4-81EE-4150-90F9-3EB9EC2CB169@microsoft.com...
> >>> > You may need to update the firmware for the RW drive if updating Nero
> >>> > fails
> >>> > to solve the problem. Nero 5.5 works just fine now, after I updated my
> >>> > firmware.
> >>> >
> >>> > j;-)
> >>> >
> >>> > "Mike" wrote:
> >>> >
> >>> >> help.....I know it's maybe the wrong NG, but could you help or direct
> >>> >> me to the right one.
> >>> >> This morning I tried to burn data to a DVD......only burnt the intro
> >>> >> then
> >>> >> stopped with a error.
> >>> >> Tried again ... same thing...
> >>> >> Virus checked, spyware checked, all OK
> >>> >> Did a sfc scannow, did a system restore to 2 days ago.
> >>> >> Tried again, same results.
> >>> >> Un-installed Nero and removed all traces from registry.
> >>> >> Reloaded Nero.
> >>> >> Tried again, same results.
> >>> >> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
> >>> >> I am adding the error message, I know its long but in other posts it
> >>> >> has
> >>> >> been said that not enough info is given.
> >>> >> Nothing unusual happened at shutdown last night or bootup this
> >>> >> morning.
> >>> >> Problems seem to start at 8:48:15 AM #21
> >>> >> I don't know how to interpret this data, hoping someone can help.
> >>> >> TIA
> >>> >> Thanks again
> >>> >> Mike
> >>> >>
> >>> >> ERROR
> >>> >> Windows XP 5.1
> >>> >> IA32
> >>> >> WinAspi: -
> >>> >> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll':
> >>> >> Ver=2.0.1.59,
> >>> >> size=160016 bytes, created 12/16/2003 8:18:06 PM
> >>> >> Nero version: 6.3.1.13 (Nero Express)
> >>> >> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1
> >>> >> TA
> >>> >> 0 -
> >>> >> 6.3.1.13
> >>> >> Adapter driver: <atapi> HA 1
> >>> >> Drive buffer : 2048kB
> >>> >> Bus Type : default (0) -> ATAPI, detected: ATAPI
> >>> >> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2
> >>> >> TA
> >>> >> 0 -
> >>> >> 6.3.1.13
> >>> >> Adapter driver: <xmasscsi> HA 2
> >>> >>
> >>> >> === Scsi-Device-Map ===
> >>> >> DiskPeripheral : Maxtor 6Y080L0 atapi Port 0
> >>> >> ID 0
> >>> >> DMA: On
> >>> >> DiskPeripheral : ST3160023A atapi Port 0
> >>> >> ID 1
> >>> >> DMA: On
> >>> >> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1
> >>> >> ID 0
> >>> >> DMA: On
> >>> >> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1
> >>> >> ID 1
> >>> >> DMA: On
> >>> >> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2
> >>> >> ID 0
> >>> >> DMA: Off
> >>> >>
> >>> >> === CDRom-Device-Map ===
> >>> >> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
> >>> >> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
> >>> >> AXV CD/DVD-ROM G: CDRom2
> >>> >> =======================
> >>> >>
> >>> >> AutoRun : 1
> >>> >> Excluded drive IDs:
> >>> >> CmdQueuing : 1
> >>> >> CmdNotification: 2
> >>> >> WriteBufferSize: 83886080 (0) Byte
> >>> >> ShowDrvBufStat : 0
> >>> >> EraseSpeed : 0
> >>> >> BUFE : 0
> >>> >> Physical memory : 767MB (785904kB)
> >>> >> Free physical memory: 376MB (385640kB)
> >>> >> Memory in use : 50 %
> >>> >> Uncached PFiles: 0x0
> >>> >> Use Static Write Speed Table: 0
> >>> >> Use Inquiry : 1
> >>> >> Global Bus Type: default (0)
> >>> >> Check supported media : Disabled (0)
> >>> >>
> >>> >> 22.7.2005
> >>> >> CD-ROM (MP3)
> >>> >> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
> >>> >> Iso document burn settings
> >>> >> ------------------------------------------
> >>> >> Determine maximum speed : FALSE
> >>> >> Simulate : FALSE
> >>> >> Write : TRUE
> >>> >> Finalize CD : TRUE
> >>> >> Multisession : FALSE
> >>> >> Burning mode : TAO
> >>> >> Mode : 1
> >>> >> ISO Level : 1 (Max. of 11 = 8 + 3 char)
> >>> >> Character set : ISO 9660
> >>> >> Joliet : TRUE
> >>> >> Allow pathdepth more than 8 directories : TRUE
> >>> >> Allow more than 255 characters in path : TRUE
> >>> >> Write ISO9660 ;1 file extensions : TRUE
> >>> >>
> >>> >> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
> >>> >> Buffer Underrun Protection activated
> >>> >>
> >>> >> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
> >>> >> Reader running
> >>> >>
> >>> >> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
> >>> >> Writer HL-DT-ST DVDRAM GSA-4081B running
> >>> >>
> >>> >> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
> >>> >> First writeable address = 0 (0x00000000)
> >>> >>
> >>> >> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
> >>> >> Turn on Track-at-once, using CD-R/RW media
> >>> >>
> >>> >> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
> >>> >> Last possible write address on media: 359848 ( 79:59.73)
> >>> >> Last address to be written: 290017 ( 64:28.67)
> >>> >>
> >>> >> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
> >>> >> Write in overburning mode: NO (enabled: CD)
> >>> >>
> >>> >> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
> >>> >> Recorder: HL-DT-ST DVDRAM GSA-4081B;
> >>> >> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics
> >>> >> Corporation
> >>> >> ATIP Data:
> >>> >> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3:
> >>> >> 00
> >>> >> 00
> >>> >> 00 (LO 0:00.00)
> >>> >> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00
> >>> >> (invalid),
> >>> >> 3:
> >>> >> 00 00 00 (invalid)
> >>> >>
> >>> >> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
> >>> >> >>> Protocol of DlgWaitCD activities: <<<
> >>> >> =========================================
> >>> >>
> >>> >> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
> >>> >> Setup items (after recorder preparation)
> >>> >> 0: TRM_DATA_MODE1 (CTransferItem)
> >>> >> 2 indices, index0 (150) not provided
> >>> >> original disc pos #0 + 290018 (290018) = #290018/64:26.68
> >>> >> relocatable, disc pos for caching/writing not required/required,
> >>> >> no
> >>> >> patch infos
> >>> >> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,
> >>> >> length
> >>> >> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
> >>> >> --------------------------------------------------------------
> >>> >>
> >>> >> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
> >>> >> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
> >>> >> DAO infos:
> >>> >> ==========
> >>> >> MCN: ""
> >>> >> TOCType: 0x00; Session Closed, disc fixated
> >>> >> Tracks 1 to 1:
> >>> >> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
> >>> >> 594264064, ISRC ""
> >>> >> DAO layout:
> >>> >> ===========
> >>> >> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
> >>> >> -150 | lead-in | 0 | 0x00 | 0x41
> >>> >> -150 | 1 | 0 | 0x00 | 0x41
> >>> >> 0 | 1 | 1 | 0x00 | 0x41
> >>> >> 290018 | lead-out | 1 | 0x00 | 0x41
> >>> >>
> >>> >> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
> >>> >> Removed 2 run-out blocks from end of track 1. Length: 290018 ->
> >>> >> 290016.
> >>> >>
> >>> >> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
> >>> >> Caching of files started
> >>> >>
> >>> >> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
> >>> >> Cache writing successful.
> >>> >>
> >>> >> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
> >>> >> Caching of files completed
> >>> >>
> >>> >> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
> >>> >> Burn process started at 24x (3,600 KB/s)
> >>> >>
> >>> >> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
> >>> >> Verifying disc position of item 0 (relocatable, disc pos, no patch
> >>> >> infos,
> >>> >> orig at #0): write at #0
> >>> >>
> >>> >> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
> >>> >> Set BUFE: supported -> ON
> >>> >>
> >>> >> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
> >>> >> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
> >>> >> Status: 0x04 (0x01, SCSI_ERR)
> >>> >> HA-Status 0x00 (0x00, OK)
> >>> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> >>> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> >>> >> Sense Code: 0x09
> >>> >> Sense Qual: 0x01
> >>> >> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00
> >>> >> 0x00
> >>> >> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
> >>> >> 0x34 0x10 0x04 0x80 0x09 0x01
> >>> >>
> >>> >> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
> >>> >> Focus or tracking error
> >>> >>
> >>> >> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
> >>> >> all writers idle, stopping conversion
> >>> >>
> >>> >> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
> >>> >> conversion idle, stopping reader
> >>> >>
> >>> >> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
> >>> >> SCSI Exec, HA 1, TA 0, LUN 0
> >>> >> Status: 0x04 (0x01, SCSI_ERR)
> >>> >> HA-Status 0x00 (0x00, OK)
> >>> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> >>> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
> >>> >> Sense Code: 0x09
> >>> >> Sense Qual: 0x01
> >>> >> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> >>> >> 0x00
> >>> >> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10

Mike · Jul 25, 2005

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Will do,and thanks for your time and help.
Mike

"Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
news:2B99388F-B32F-4934-A152-87826762C8EB@microsoft.com...
> Ok, both firmwares don't and will not be unless the drives are identical.
> The
> firmware will be unique to the drives model#/id string. I would recommend
> you
> contact a customer service tech and give them the ID string and firmware
> ver
> as posted here and let them give you a link to the update.
>
> There are firmware hacks and patches that can harm your drives and void
> any
> warranties or make it impossible to re-flash the proper firmware update,
> so,
> be careful..
>
> j;-)
>
> "Mike" wrote:
>
>> Both drives are LG
>> Did have Nero Info Tool, was downloaded in the Nero 6.6 packet, but did
>> not
>> now what it was for.
>>
>> Results of Nero Info Tool
>>
>> DVD Writer
>> ID String [1:0] D:\ DT-ST DVDRAM GSA 4081B
>> Firmware A100
>>
>> DVD Player
>> ID String [1:0] E:\ Hl-DT-ST RW/DVD GCC-4521B
>> Firmware 1.05
>>
>> Question
>> Should both firmware's be the same?
>>
>> Will check LG website.
>> Will be back later
>> Mike
>>
>> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
>> news:EE12BF4D-CA5B-4978-BE12-42A9790C77B6@microsoft.com...
>> > No, I don't mean drivers... The firmware is info that is on a chip in
>> > the
>> > unit itself, like a bios chip on the motherboard. Ok, to check your
>> > firmware
>> > version go here and get nero info tool.
>> > http://www.iomagic.com/Firmware/NeroInfotool/NeroInfoTool_221.zip
>> > and go here to see how to read the drive string and firmware ver.
>> > http://www.iomagic.com/Firmware/NeroInfotool/neroinfotool.html
>> > and post your results or go to the recorder drives OEM web site to see
>> > if
>> > a
>> > firmware update is available.
>> >
>> > j;-)
>> >
>> >
>> > "Mike" wrote:
>> >
>> >> e reply.
>> >> "You may need to update the firmware for the RW drive "
>> >> What is firmware? do you mean drivers?
>> >> The DVD writer only came with a Nero disk.
>> >> Mike
>> >>
>> >>
>> >> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
>> >> news:391953C4-81EE-4150-90F9-3EB9EC2CB169@microsoft.com...
>> >> > You may need to update the firmware for the RW drive if updating
>> >> > Nero
>> >> > fails
>> >> > to solve the problem. Nero 5.5 works just fine now, after I updated
>> >> > my
>> >> > firmware.
>> >> >
>> >> > j;-)
>> >> >
>> >> > "Mike" wrote:
>> >> >
>> >> >> help.....I know it's maybe the wrong NG, but could you help or
>> >> >> direct
>> >> >> me to the right one.
>> >> >> This morning I tried to burn data to a DVD......only burnt the
>> >> >> intro
>> >> >> then
>> >> >> stopped with a error.
>> >> >> Tried again ... same thing...
>> >> >> Virus checked, spyware checked, all OK
>> >> >> Did a sfc scannow, did a system restore to 2 days ago.
>> >> >> Tried again, same results.
>> >> >> Un-installed Nero and removed all traces from registry.
>> >> >> Reloaded Nero.
>> >> >> Tried again, same results.
>> >> >> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
>> >> >> I am adding the error message, I know its long but in other posts
>> >> >> it
>> >> >> has
>> >> >> been said that not enough info is given.
>> >> >> Nothing unusual happened at shutdown last night or bootup this
>> >> >> morning.
>> >> >> Problems seem to start at 8:48:15 AM #21
>> >> >> I don't know how to interpret this data, hoping someone can help.
>> >> >> TIA
>> >> >> Thanks again
>> >> >> Mike
>> >> >>
>> >> >> ERROR
>> >> >> Windows XP 5.1
>> >> >> IA32
>> >> >> WinAspi: -
>> >> >> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll':
>> >> >> Ver=2.0.1.59,
>> >> >> size=160016 bytes, created 12/16/2003 8:18:06 PM
>> >> >> Nero version: 6.3.1.13 (Nero Express)
>> >> >> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA
>> >> >> 1
>> >> >> TA
>> >> >> 0 -
>> >> >> 6.3.1.13
>> >> >> Adapter driver: <atapi> HA 1
>> >> >> Drive buffer : 2048kB
>> >> >> Bus Type : default (0) -> ATAPI, detected: ATAPI
>> >> >> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA
>> >> >> 2
>> >> >> TA
>> >> >> 0 -
>> >> >> 6.3.1.13
>> >> >> Adapter driver: <xmasscsi> HA 2
>> >> >>
>> >> >> === Scsi-Device-Map ===
>> >> >> DiskPeripheral : Maxtor 6Y080L0 atapi Port
>> >> >> 0
>> >> >> ID 0
>> >> >> DMA: On
>> >> >> DiskPeripheral : ST3160023A atapi Port
>> >> >> 0
>> >> >> ID 1
>> >> >> DMA: On
>> >> >> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port
>> >> >> 1
>> >> >> ID 0
>> >> >> DMA: On
>> >> >> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port
>> >> >> 1
>> >> >> ID 1
>> >> >> DMA: On
>> >> >> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port
>> >> >> 2
>> >> >> ID 0
>> >> >> DMA: Off
>> >> >>
>> >> >> === CDRom-Device-Map ===
>> >> >> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
>> >> >> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
>> >> >> AXV CD/DVD-ROM G: CDRom2
>> >> >> =======================
>> >> >>
>> >> >> AutoRun : 1
>> >> >> Excluded drive IDs:
>> >> >> CmdQueuing : 1
>> >> >> CmdNotification: 2
>> >> >> WriteBufferSize: 83886080 (0) Byte
>> >> >> ShowDrvBufStat : 0
>> >> >> EraseSpeed : 0
>> >> >> BUFE : 0
>> >> >> Physical memory : 767MB (785904kB)
>> >> >> Free physical memory: 376MB (385640kB)
>> >> >> Memory in use : 50 %
>> >> >> Uncached PFiles: 0x0
>> >> >> Use Static Write Speed Table: 0
>> >> >> Use Inquiry : 1
>> >> >> Global Bus Type: default (0)
>> >> >> Check supported media : Disabled (0)
>> >> >>
>> >> >> 22.7.2005
>> >> >> CD-ROM (MP3)
>> >> >> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
>> >> >> Iso document burn settings
>> >> >> ------------------------------------------
>> >> >> Determine maximum speed : FALSE
>> >> >> Simulate : FALSE
>> >> >> Write : TRUE
>> >> >> Finalize CD : TRUE
>> >> >> Multisession : FALSE
>> >> >> Burning mode : TAO
>> >> >> Mode : 1
>> >> >> ISO Level : 1 (Max. of 11 = 8 + 3 char)
>> >> >> Character set : ISO 9660
>> >> >> Joliet : TRUE
>> >> >> Allow pathdepth more than 8 directories : TRUE
>> >> >> Allow more than 255 characters in path : TRUE
>> >> >> Write ISO9660 ;1 file extensions : TRUE
>> >> >>
>> >> >> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
>> >> >> Buffer Underrun Protection activated
>> >> >>
>> >> >> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
>> >> >> Reader running
>> >> >>
>> >> >> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
>> >> >> Writer HL-DT-ST DVDRAM GSA-4081B running
>> >> >>
>> >> >> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
>> >> >> First writeable address = 0 (0x00000000)
>> >> >>
>> >> >> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
>> >> >> Turn on Track-at-once, using CD-R/RW media
>> >> >>
>> >> >> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
>> >> >> Last possible write address on media: 359848 ( 79:59.73)
>> >> >> Last address to be written: 290017 ( 64:28.67)
>> >> >>
>> >> >> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
>> >> >> Write in overburning mode: NO (enabled: CD)
>> >> >>
>> >> >> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
>> >> >> Recorder: HL-DT-ST DVDRAM GSA-4081B;
>> >> >> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics
>> >> >> Corporation
>> >> >> ATIP Data:
>> >> >> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00),
>> >> >> 3:
>> >> >> 00
>> >> >> 00
>> >> >> 00 (LO 0:00.00)
>> >> >> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00
>> >> >> (invalid),
>> >> >> 3:
>> >> >> 00 00 00 (invalid)
>> >> >>
>> >> >> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
>> >> >> >>> Protocol of DlgWaitCD activities: <<<
>> >> >> =========================================
>> >> >>
>> >> >> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
>> >> >> Setup items (after recorder preparation)
>> >> >> 0: TRM_DATA_MODE1 (CTransferItem)
>> >> >> 2 indices, index0 (150) not provided
>> >> >> original disc pos #0 + 290018 (290018) = #290018/64:26.68
>> >> >> relocatable, disc pos for caching/writing not
>> >> >> required/required,
>> >> >> no
>> >> >> patch infos
>> >> >> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,
>> >> >> length
>> >> >> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
>> >> >> --------------------------------------------------------------
>> >> >>
>> >> >> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
>> >> >> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
>> >> >> DAO infos:
>> >> >> ==========
>> >> >> MCN: ""
>> >> >> TOCType: 0x00; Session Closed, disc fixated
>> >> >> Tracks 1 to 1:
>> >> >> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0
>> >> >> 307200
>> >> >> 594264064, ISRC ""
>> >> >> DAO layout:
>> >> >> ===========
>> >> >> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
>> >> >> -150 | lead-in | 0 | 0x00 | 0x41
>> >> >> -150 | 1 | 0 | 0x00 | 0x41
>> >> >> 0 | 1 | 1 | 0x00 | 0x41
>> >> >> 290018 | lead-out | 1 | 0x00 | 0x41
>> >> >>
>> >> >> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
>> >> >> Removed 2 run-out blocks from end of track 1. Length: 290018 ->
>> >> >> 290016.
>> >> >>
>> >> >> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
>> >> >> Caching of files started
>> >> >>
>> >> >> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
>> >> >> Cache writing successful.
>> >> >>
>> >> >> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
>> >> >> Caching of files completed
>> >> >>
>> >> >> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
>> >> >> Burn process started at 24x (3,600 KB/s)
>> >> >>
>> >> >> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
>> >> >> Verifying disc position of item 0 (relocatable, disc pos, no patch
>> >> >> infos,
>> >> >> orig at #0): write at #0
>> >> >>
>> >> >> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
>> >> >> Set BUFE: supported -> ON
>> >> >>
>> >> >> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
>> >> >> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
>> >> >> Status: 0x04 (0x01, SCSI_ERR)
>> >> >> HA-Status 0x00 (0x00, OK)
>> >> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> >> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>> >> >> Sense Code: 0x09
>> >> >> Sense Qual: 0x01
>> >> >> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00
>> >> >> 0x00
>> >> >> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>> >> >> 0x34 0x10 0x04 0x80 0x09 0x01
>> >> >>
>> >> >> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
>> >> >> Focus or tracking error
>> >> >>
>> >> >> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
>> >> >> all writers idle, stopping conversion
>> >> >>
>> >> >> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
>> >> >> conversion idle, stopping reader
>> >> >>
>> >> >> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
>> >> >> SCSI Exec, HA 1, TA 0, LUN 0
>> >> >> Status: 0x04 (0x01, SCSI_ERR)
>> >> >> HA-Status 0x00 (0x00, OK)
>> >> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> >> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>> >> >> Sense Code: 0x09
>> >> >> Sense Qual: 0x01
>> >> >> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>> >> >> 0x00
>> >> >> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>> >> >> 0x34 0x10 0x04 0x80 0x09 0x01
>> >> >>
>> >> >> 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
>> >> >> Focus or tracking error
>> >> >>
>> >> >> 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
>> >> >> Could not perform EndTrack
>> >> >>
>> >> >> 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
>> >> >> Invalid write state
>> >> >> HL-DT-ST DVDRAM GSA-4081B\H1 T0
>> >> >>
>> >> >> 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
>> >> >> Could not perform EndTrack

Search

Unable to burn DVD's but can Burn CD's

Mike

Splendid

Guest

Guest

Guest

Guest

Mike

Splendid

Mike

Splendid

Guest

Guest

Mike

Splendid

Mike

Splendid

Guest

Guest

Mike

Splendid

Guest

Guest

Mike

Splendid

TRENDING THREADS

Latest posts

Moderators online

Share this page