Help: Dell AIO 962 and Netgear PS121 print server.

Archived from groups: alt.sys.pc-clone.dell (More info?)

"JKC" <jkcjkcjkc@yahoo.REMOVETHIS.com> wrote in message
news:zsBie.95392$hu5.8831@tornado.texas.rr.com...
>I have a Dell AIO 962 and Netgear PS121 print server.
> They are both brand new.
> I tested and verified that the printer works properly by directly
> connecting
> it my PC (Dell Dimension 3000 running XP home).
> I tested and verified that the Ethernet port, where the printer server is
> connected to, is working properly, too.
> Afterward, I connected the print server to my home network and the printer
> to the print server.
>
> On Netgear's 'Print Server Setup Wizard,' the print server shows up with
> an
> expected and reasonable IP address. However, when I click "next," after a
> minute or so, it comes back with an error message "Network Busy, or Device
> not found."
>
> What is the root cause for this error?
> I can not proceed until it is resolved.
>
> In general, does a printer server (a relatively low/mid range) work with a
> multi-function all-in-one printer?
>
> Any help would be appreciated.
>
>
>

I would not be surprised if it just won't work. Many low-end All-in-Ones
will not. You will, at least, lose everything except printing.

Just attach it to one of your machines and share it.

Tom