WTB: A few DK Connectors, partial wiring harness

[Guest]

Archived from groups: rec.games.video.arcade.marketplace (More info?)

Hello;
I need a couple parts for my Nintendo Donkey Kong... I need the harness
that goes from the control panel to the board (I believe it terminates in
about a 15 position black plug), and I need a sound cable (little brown one,
has a black plug on one end, white plug on the other).

Lemme know if you have either one, and what you'd like for it, or if you
know a source for the connectors so I could make my own.

Thanks,

Ron
Lyonsronnie@hotmail.com
Charlotte, NC

 

[Guest]

Archived from groups: rec.games.video.arcade.marketplace (More info?)

On Sun, 31 Jul 2005 02:55:37 GMT, "Joey Lyons"
<Iluvmoovies@hotmail.com> wrote:

>Hello;
> I need a couple parts for my Nintendo Donkey Kong... I need the harness
>that goes from the control panel to the board (I believe it terminates in
>about a 15 position black plug), and I need a sound cable (little brown one,
>has a black plug on one end, white plug on the other).
>
>Lemme know if you have either one, and what you'd like for it, or if you
>know a source for the connectors so I could make my own.

I've built some sound cables. If you have a 2 board DK set, you can
make a CP harness using the edge connector and a 44 pin connector.

http://www.mikesarcade.com/cgi-bin/store.pl?sku=SNDCBLNIN
http://www.mikesarcade.com/cgi-bin/store.pl?sku=CECM44

And here's the pinouts for the board set.

http://www.mikesarcade.com/cgi-bin/spies.cgi?action=url&type=pinout&page=Nintendo_Classic.html

Best,

- Mike -