How do I (please, step by step and type very slow, Im new at this) change the display driver back to Standard VGA. Im trying to load up this GF2 MX 200 and its being very stubborn.
Thanks
LOLOLOLO, Yes you did type to slow, I snuck one in there on you, thanks a millions for the reply. But alot of what youre telling me is , well CONFUSING!! Im new at problem solving but if you get a chance read the post I psted while you were posting a reply to my firt post????, god gravey that just doesnt sound right does it. Thanks again, and I greatly appreciate your slow typing. I had no problem reading it what so ever.!!!
Hey Thanks Toejam, I followed your directions and downloaded some 12.90 drivers. I couldnt locate any detonator 3 12.90 drivers but I found some listed under GF 2. I can now boot into windows insteasd of safe mode. But Windows now detects a driver problem with the graphics card. Do you have any other ideas on this one. I am happier, at least now I can get into windows without going into safe mode first. Still have a driver conflict/problem tho.
"Im kinda getting used to looking at the world in 16 COLOR"
Try the new wqhl certified 21.83's they have a preuninstalled before you install, I never saw that before in the det series. Worked on my gf3 just dandy.(win xp)
~Matisaro~
"The Cash Left In My Pocket,The BEST Benchmark"
~Tbird1.3@1.5~
Okay, dude! Half the battle is won ... you've gotten into Windows without being stuck in Safe Mode.
Now ... it's time to describe the conflict to us in some detail. Post in the error message, exactly as you see it.
Next ... you mentioned being overclocked. You may have to back down the processor to the original speed, for the moment, just to rule this out as a potential reason for the problem. How about the Front Side Bus? AGP ports are finicky about being overclocked.
What was the previous video card that you had in the system?
Give us a few more system specifications. You mentioned an Abit BX6 440BX mainboard, with 128MB of Micron PC-100. What other cards do you have in the PCI slots?
In the Device Manager ... check and see if the video card is sharing an IRQ with another device ... and if so, what do you see?
The error code in Device Manager under systems says "This device either not present or not working properly or does not have all drivers installed. Error code 24." Have tried choosing update driver and still comes back after reboot with same error code.
Also..Old graphics card was a Diamond Viper 8 mb AGP -- not over clocked.
Have also disabled video shadow caching, and AGP Apeture from 64 to 32. Some have said to use the 6.31 drivers but have not seen them on the web site given by TOJAM31. Only found 12.90 drivers.
I think that 8.0 is installed, but am not sure. If its on here it was before installing attempts on this card. Ill set the AGP apet size back to 64. I dont have any anti-virus programs on this system. WHat about this Video shadow caching, I was told to disable it. Which I did in the BIOS??? Thanks for the help and the web site addresses, I didnt know loading a new card would be this dang hard, but Im learning.....but I dont know aexactly what Im learning...LOL.