Geforce2 Pro to Quadro Pro

[Guest]

Hi everybody,

Does anybody knows how to modify Leadtek's GeForce2 Pro 64MB DDR to a Quadro Pro? (The one with the three little LEDs and a ugly heat sink)
Some sites says to shift resistors from R121 to R122,R123 to R124.
But others say R102 to R98.

Has anyone with the same card done the mod?
If so, what drivers do u recommend?
Elsa Gloria III or Elsa Gloria II?
Please share your experience.

 

[flamethrower205]

I can tell you the proper config, but I won't, cause you'll void your warranty. You can get the same effect using Rivatuner, and the Quadro patchscript in it. Here's how to use it:
Start Rivatuner and click the poweruser tab
then open a folder w/ patchscripts and depending upon which OS you're using, select the antiprotection patch script to and apply it to the driver (note, antiprotection is only needed for drivers 14.xx through 21.xx; anything earlier and later it's not necessary). Next, do teh same, except the patchscript now to change it ot Quadro, and select which one to force. Finally, install teh drivers, and voila.

If it's working...overclock it!

 

[Gog]

Or use Soft Quadro (available for download at loads of sites just do a search on SoftQuadro) - worked fine for me

--------------------------------

Look at the size of that thing!

 

[Guest]

Hey, thanks for the tip guys!!!
I'm right on it.

-------------------------------
What thing?