CD Burn errors on XP SP2 - Athlon 64

[Guest]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

I recently built a new Athlon 64 system running Win XP SP2. I have 2 DVD
burners: a Pioneer A09 and a Toshiba 5372 - both are 16x dual layer.

I have burned DVD's successfully on both drives, but have gotten an
error when burning audio CDs. The error occurs when writing the final
track - the CD will play all but the last 2 tracks. The Nero log has
similar error msg on each CD burn. Example of Nero log errors below:


6:19:27 PM #136 CDR -1135 File Writer.cpp, Line 311
Write error

6:19:27 PM #137 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:19:27 PM #138 SCSI -1135 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 2, LUN 0
Status: 0x04 (0x01, SCSI_ERR) blah,blah,blah........

6:19:27 PM #139 CDR -1135 File WriterStatus.cpp, Line 167
Write error

6:19:27 PM #140 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

6:19:28 PM #141 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 40x (6,000 KB/s)


My old system is an Athlon 1.3Ghz running Win XP SP1 and works fine
using the same version of Nero. I'm not sure if this is an XP2 problem,
or a 64-bit problem. I've not found this problem mentioned on Athlon 64
forums. Any help appreciated - I'm creating lots of frisbees...

Ck

 

[Guest]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

The problem seems to be with Nero. Have you check to see if Nero would
support XP x64? Even though XP x64 is based on Xp Pro, it is different!


"Cathy" <c.keeton@comcast.net> wrote in message
news:jrqdnVY9g55SDJHeRVn-gA@comcast.com...
>I recently built a new Athlon 64 system running Win XP SP2. I have 2 DVD
>burners: a Pioneer A09 and a Toshiba 5372 - both are 16x dual layer.
>
> I have burned DVD's successfully on both drives, but have gotten an error
> when burning audio CDs. The error occurs when writing the final track -
> the CD will play all but the last 2 tracks. The Nero log has similar error
> msg on each CD burn. Example of Nero log errors below:
>
>
> 6:19:27 PM #136 CDR -1135 File Writer.cpp, Line 311
> Write error
>
> 6:19:27 PM #137 Text 0 File ThreadedTransfer.cpp, Line 228
> all writers idle, stopping conversion
>
> 6:19:27 PM #138 SCSI -1135 File Cdrdrv.cpp, Line 1180
> SCSI Exec, HA 0, TA 2, LUN 0
> Status: 0x04 (0x01, SCSI_ERR) blah,blah,blah........
>
> 6:19:27 PM #139 CDR -1135 File WriterStatus.cpp, Line 167
> Write error
>
> 6:19:27 PM #140 TRANSFER -24 File WriterStatus.cpp, Line 167
> Could not perform end of Disc-at-once
>
> 6:19:28 PM #141 Phase 38 File dlgbrnst.cpp, Line 1832
> Burn process failed at 40x (6,000 KB/s)
>
>
> My old system is an Athlon 1.3Ghz running Win XP SP1 and works fine using
> the same version of Nero. I'm not sure if this is an XP2 problem, or a
> 64-bit problem. I've not found this problem mentioned on Athlon 64 forums.
> Any help appreciated - I'm creating lots of frisbees...
>
> Ck

 

[Guest]

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?)

Yves Leclerc wrote:
> The problem seems to be with Nero. Have you check to see if Nero would
> support XP x64? Even though XP x64 is based on Xp Pro, it is different!
>
Sorry, I guess I wasn't clear about the '64'. I'm running an Athlon 64
bit chip, but I'm running on the regular Win XP Pro SP2.

I wondered if anyone was aware of any issues with Service Pack 2 and CD
burning, or if there are any known issues with SP2 and the Athlon 64 bit
processor performing CD burning.

Thanks.
>
> "Cathy" <c.keeton@comcast.net> wrote in message
> news:jrqdnVY9g55SDJHeRVn-gA@comcast.com...
>
>>I recently built a new Athlon 64 system running Win XP SP2. I have 2 DVD
>>burners: a Pioneer A09 and a Toshiba 5372 - both are 16x dual layer.
>>
>>I have burned DVD's successfully on both drives, but have gotten an error
>>when burning audio CDs. The error occurs when writing the final track -
>>the CD will play all but the last 2 tracks. The Nero log has similar error
>>msg on each CD burn. Example of Nero log errors below:
>>
>>
>>6:19:27 PM #136 CDR -1135 File Writer.cpp, Line 311
>>Write error
>>
>>6:19:27 PM #137 Text 0 File ThreadedTransfer.cpp, Line 228
>>all writers idle, stopping conversion
>>
>>6:19:27 PM #138 SCSI -1135 File Cdrdrv.cpp, Line 1180
>>SCSI Exec, HA 0, TA 2, LUN 0
>>Status: 0x04 (0x01, SCSI_ERR) blah,blah,blah........
>>
>>6:19:27 PM #139 CDR -1135 File WriterStatus.cpp, Line 167
>>Write error
>>
>>6:19:27 PM #140 TRANSFER -24 File WriterStatus.cpp, Line 167
>>Could not perform end of Disc-at-once
>>
>>6:19:28 PM #141 Phase 38 File dlgbrnst.cpp, Line 1832
>>Burn process failed at 40x (6,000 KB/s)
>>
>>
>>My old system is an Athlon 1.3Ghz running Win XP SP1 and works fine using
>>the same version of Nero. I'm not sure if this is an XP2 problem, or a
>>64-bit problem. I've not found this problem mentioned on Athlon 64 forums.
>>Any help appreciated - I'm creating lots of frisbees...
>>
>>Ck
>
>
>