Sign in with
Sign up | Sign in
Your question

Help me!!!

Tags:
  • Graphics Cards
  • Graphics
Last response: in Graphics & Displays
Share
Anonymous
a b U Graphics card
January 22, 2002 6:49:02 PM

I took out the ram in my computer to get some more, but I couldnt find any. So, I went back home, put it all together. But, the video card (it's made by trident) doesn't work. My monitor says "no video signal". I tried taking out all of the other cards, I thought it could be a irq conflict. But, that didn't work. What could be wrong with it?

Thanx.

More about : question

January 24, 2002 4:42:08 PM

Is it an AGP or PCI card, AGP cards have to be pushed in very deep in order to work.

My case has so many fans that it hovers above the ground :eek:  .
January 24, 2002 7:44:20 PM

Does the rest of the computer power up ok?

-- There are no answers to find in the bottom of a glass. But you can have fun looking for them.
Related resources
January 25, 2002 1:18:42 PM

ok slow down a bit....so you just built a new computer or did you just go back home and put that same ram in an existing previously working computer?.....if it was the latter then just try to reseat the memory...if its a new computer try another video card....and be more specific...does the computer comeo on at all?....do you get any beep codes?....because a computer will boot if there is no memory in the computer and it will boot if there is no video card....but you will get a beep code of some kind.....just try reseating everything
January 25, 2002 9:36:44 PM

I'm guessing it was something simple as he's not come back.

-- There are no answers to find in the bottom of a glass. But you can have fun looking for them.
!