ICS host with bridged, wifi client setup (?)

Archived from groups: alt.internet.wireless (More info?)

George Hitz <nospam@nospam.invalid> wrote in
news:3pe9c0pgjnrb0juhp74blrlbbjtkljb6li@4ax.com:

>
>
> I have a W98SE machine with a dialup modem and ethernet NIC.
>
> I have a WXP client laptop with ethernet NIC I would like
> "connected" to the W98SE machine via a pair of EnGenius
> 802.11b 2611-CB3 bridges.
>
> I want the laptop to connect to the modem via ICS on the
> W98SE machine.
>
> If I hardwire the XP laptop to the W98SE machine as a test,
> ICS sets up nicely as long as I select DHCP but the EnGenius
> cards want to be identified by private network IPs - hence
> a problem in how to set up ICS without DHCP.
>
> Anyone have any ideas on how to do this? Hopefully
> I am asking the right question.
>
> TIA,
>
> George

Set up your clients as follows:

IP: 192.168.0.2 - whatever (only the last octet changes, e.g. "2", not to
exceed 254, different for each machine)
subnet mask 255.255.255.0 (same for all machines_
default gateway 192.168.0.1 (same for all machines)
dns 192.168.0.1 (same for all machines)