Well my Abit ST6-RAID mobo went skyward two days ago. Decided to overclock to 147MHz, and it didn't like it, so I took it back to 142MHz and...nothing. On pressing reset button, I got 1 2 sec long beep repeated continuously. On power off and restart I got:
All LEDs, although after the second time the HDD LED didn't come on.
All fans (4 x case, PSU, HSF, and gfx fan).
No display.
No beeps at all.
I swapped out the PSU then the gfx card, then the CPU...still nothing. Finally swapped back to my trusty old BX133-R and it was fine!!!
So what's the verdict?
I'm guessing at either the PCI BUS, chipset (temps were in mid 40s before problem), or perhaps the DMA 0 controller (some book suggested it).
Whatcha think?
<b><font color=blue>~scribble~</font color=blue></b> <A HREF="http://www.ud.com/home.htm" target="_new">Help cure cancer.</A>
All LEDs, although after the second time the HDD LED didn't come on.
All fans (4 x case, PSU, HSF, and gfx fan).
No display.
No beeps at all.
I swapped out the PSU then the gfx card, then the CPU...still nothing. Finally swapped back to my trusty old BX133-R and it was fine!!!
So what's the verdict?
I'm guessing at either the PCI BUS, chipset (temps were in mid 40s before problem), or perhaps the DMA 0 controller (some book suggested it).
Whatcha think?
<b><font color=blue>~scribble~</font color=blue></b> <A HREF="http://www.ud.com/home.htm" target="_new">Help cure cancer.</A>