Mobo for Pentium 3 450Mhz

[winglesslight]

Hi,
I am looking for a good mobo for this system:

Pentium 3 450Mhz (Slot CPU not Socket)
PC100 256MB RAM
HDD 10GB or 30GB

Anybody recommendation?

I would really appreciate.

<P ID="edit"><FONT SIZE=-1><EM>Edited by winglesslight on 01/22/02 08:11 PM.</EM></FONT></P>

 

[camieabz]

Definitely a BX chipset. Make sure it is ATA66 and not ATA33.

<b><font color=blue>~scribble~</font color=blue></b> <A HREF="http://www.ud.com/home.htm" target="_new">Help cure cancer.</A>

 

[LastStop]

Had a ASUS P3B-F board which was rock solid.

 

[Crashman]

Too bad you didn't ask a couple weeks ago, Compgeeks had the Epox BX3 for $35, a darned near perfect board. Got one myself! Almost any Intel BX chipset board is good, unless built by PC-Chips (and brands that use PC-Chips boards, such as Alton, Pine, Commate, etc.).

What's the frequency, Kenneth?

 

[girish]

a BX based board is the best one, but it has a PIIX4 southbridge that supports only ATA/33, you need to have a external ATA/100 controller to use faster had drives. it also lacks AGP4X support.

fastest (but also the slowest) you can get is some real cheap 810 based boards that have both slot and socket, dubbed as Dual boards.

Anyway, Asus P2B-F is the best you can get pretty easily, P3B-F better but rare.

<font color=red>Nothing is fool-proof. Fools are Ingenious!</font color=red>