KT7E RAM Bus Speed

[skligmund]

My fsb is 100 mghz (duron 1 ghz). I have pc133 ram. When I atempt to use the selection "Host Bus + PCI bus" my computer doesn't boot. This setting would be 133 mghz memory bus speed. It only works at 100 mghz though. Help?

Just a message from Roadkill Computers Inc.

 

[phsstpok]

Try increasing the I/O voltage to 3.4 or 3.5 volts. If that doesn't work try conservative memory timings. Start with CAS3, Normal and try to work up to CAS2, Turbo. If it works at the lowest setting but fails somewhere on the way to the highest setting then your problem is your memory.

<b>We are all beta testers!</b>