Bios Questions

[Guest]

I have an Athlon XP 1800 on an Epox 8KHA+ board. In the bios I do not have an option to set my AGP port to 4x. Just 1x or 2x. Anyone have any idea why?? I know 4x is supported by the board. Also when I boot my memory count shows PC2100 RAM. I actually have PC 2400. Is there a way to change that? Or do I just have to overclock it then it will say PC 2400? What would I need to Overclock it to? Thanks

 

[jc14all]

Check for an updated version of your BIOS at your M/B manufacturer's website.


<b><font color=red>Cast your vote with your $,</b></font color=red> <b><font color=blue>shed your pride with your opinion.</b></font color=blue>

 

[pat]

your memory will run at 2400 only if you overclock your system. otherwise, it will run at the standard KT266A speed, 2100.

-Always put the blame on you first, then on the hardware !!!

 

[Guest]

I have the most recent bios, dated January of 2002. I have a Voodoo5 card in my machine. Would that effect the options in the bios? I believe it supports 4x anyway.

 

[camieabz]

To get memory to run at PC2400 speed, your FSB must be 150MHz.

<b><font color=blue>The Cisco Kid</font color=blue></b>