A process or thread crucial to system operation has unexpectedly exited or been
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
Arg1: 0000000000000003, Process
Arg2: fffffa800736db30, Terminating object
Arg3: fffffa800736de10, Process image file name
Arg4: fffff800033cb540, Explanatory message (ascii)
just do as I ask and see if it helps, I don't mean to be rude but it will only take 3 min to do this and it may be the easiest fix there is
I understand you're trying to help and I don't mean to be dismissive, but I have done that exact process multiple times over past few weeks. I've also tried removing drivers and re-seating. All efforts were in vain.
For the sake of troubleshooting, I'll give it another shot and post my results.
Google search yeilds some info with SSD's having sleep mode issues. I'm going to look on the OCZ site for firmware updates right now.
Can you boot the system into Safe Mode and let it run for a while there. If the system does not crash, the chances of it being a system driver loading at desktop like the video driver for example is the cause of the BSOD.
I checked mini dumps with BlueScreenView and each one says same thing 'Caused by drivers: ntoskrnl.exe' with address 'ntoskrnl.exe+70600'. To be honest, there is techie in me, but I haven't the slightest clue when looking at this. it's all Chinese to me.
On another note, before i saw the new troubleshooting comments here, I took advice from sevenforums.com and ran chkdisk. it checked out my SSD and reported it clean at the end. I've tested sleep mode a couple times and it seems to have cleared up the problem.
Unfortunately, I have a whole new problem. When the pc goes into sleep mode, the monitor doesn't sleep with it.
I'll try to re-install video drivers to clear it up. if that doesnt work, then swapping sata cables hopefully does.
I'll post back with results, good or bad.
Thanks for suggestion. Normally I would try something like this, however, I've RMA'd the 6GB currently in my machine and have 12GB (same manufacturer) on the way. If my problem persists, I'll look into your timing solution.