ASUS P4-T533-C ...HELLP PLEASE PLEZ PLEZ

[turbom3]

So far i have a:
p4-2.62
ASUS P4-533-c
a 80 Gig WD hard drive
Vision Tek 128 mb
Kingston RRam 1066 (128x2)
365W Enermax power supply

When i first boot up. Nothing shows, monitor does not boot up. I cant get to BIOS set up. I tried switching the V-card, and it works with my friends computer. What cound be wrong wiht it?

IS there some sort of dip switch that im supose to switch?
or is it the RAM, since its Kingston not samsung?

Please Help! Im losin hair by the moment!!!!

 

[nja469]

First I would like to mention it's not the brand of RAM. Many could argue Kingston is better than Samsung, since Samsung sometimes uses generic PCB's. Samsung is still a good brand though, don't get me wrong, simply stating Kingston is very good quality.

Anyhow as for the issue. I'm not really sure, but did you try resetting the CMOS jumper? Also is there a on-board jumper for 100 or 133MHz? If so make sure that is selected correctly. Also try starting with only the CPU, RAM and vid card and see if you get a picture.

"Opinions are like assholes, everyone has one"