Some of you will remember my recent struggle with an Asus TUSL2-C mobo that turned out to be DOA. Well I went and bought a new one and the good news is that this one will POST (oh yay...streamers, balloons etc). The bad news is I still can't get it to boot.
I've pulled all the cards except the AGP graphics card and tried booting but no joy. I've double checked all the jumpers and as far as I can tell they are all set correctly for jumper free operation. I re-checked the pin alignment for the HDD, CD-ROM and floppy.
The mobo will POST and I can access the BIOS. As far as I can tell I have the BIOS setup correctly, but I'm certainly no expert in this area.
Anyone got some suggestions / thoughts / ideas / help ???
Many thanks,
JasonR
*** Most PC problems can be fixed by using a bigger hammer ***
I've pulled all the cards except the AGP graphics card and tried booting but no joy. I've double checked all the jumpers and as far as I can tell they are all set correctly for jumper free operation. I re-checked the pin alignment for the HDD, CD-ROM and floppy.
The mobo will POST and I can access the BIOS. As far as I can tell I have the BIOS setup correctly, but I'm certainly no expert in this area.
Anyone got some suggestions / thoughts / ideas / help ???
Many thanks,
JasonR
*** Most PC problems can be fixed by using a bigger hammer ***
Facebook
Twitter
Instagram