Sign-in / Sign-up
Your question

help with Gigabyte GA-7VAXP and gf4 ti 4600

Tags:
  • Motherboards
  • Computer
  • Gigabyte
Last response: in Motherboards
September 29, 2002 8:07:43 PM

i just bought a Gigabyte GA-7VAXP motherboard and tried to put my GF4 Ti 4600 into it. I put the card in and turned my machine on, and i get a 2 second long beep and thats it, screen is black. Tried the video card in another computer and it still works fine, tried a radeon 9700 and 9000 in the GA-7VAXP and they work fine, can somebody please give me some idea to do, i have another computer with the GA-7VAXP also and the GF4 will not work in that one either. The card works in every other motherboard we have here, any ideas?

Thanks

More about : gigabyte 7vaxp gf4 4600

September 30, 2002 12:30:40 AM

anyone?
September 30, 2002 8:13:24 PM

try reseating your ram and the ti4600.
Good luck
Related resources
September 30, 2002 8:19:12 PM

If I had a GF4 Id try it on mine for ya. you make sure the voltage settings are ok? and its set to 4x and whatnot? it says something about that in the manual.
September 30, 2002 10:45:37 PM

I have a ti4200 working awesome with that board. My system hung up too when I pushed the AGP voltage up to 1.6v. The manual says 20 seconds to clear the cmos. I pulled the battery out, waited a couple of mintues, and turned on the computer without the battery in. That did the trick.



Good chance it's a bad card.

P4's @ 3600Mhz ()wNz J00 4LL!!!!!!