HP UX 10.20 K200 installtion of a 100BaseT network card. H..

[Guest]

Archived from groups: comp.sys.hp.hardware (More info?)

I'm looking to install an HSC 10/100BaseT 2-port network card into an HP9000
K200 server.

What drivers and patches do I need to install for the card to be recognised
properly.

Also has anyone got the drivers/patches that they could send me or links to
where I can download them from (within HP's site)

Thanks for any help

 

[Guest]

Archived from groups: comp.sys.hp.hardware (More info?)

David Travers <david.traveres@ntl.com> wrote:
> I'm looking to install an HSC 10/100BaseT 2-port network card into
> an HP9000 K200 server.

> What drivers and patches do I need to install for the card to be
> recognised properly.

The driver would bwas called "btlan4."

> Also has anyone got the drivers/patches that they could send me or
> links to where I can download them from (within HP's site)

I doubt that the 10.20 driver is online for download from HP. It
would have been on one or more of the "DART" CD's one would recieve if
one were signed-up for a software subscription. Otherwise, the driver
was (IIRC) delivered on CD when one ordered media with the NIC.

The patches will almost certainly still be someone on the HP ITRC, so
following likely-looking "support" links will probably get you there.

Of course, the 100BT drivers went "core" (IIRC) in 11.0, certianly in
11.11 (11i v1), so if you were to upgrade your OS you could get the
driver that way

rick jones
--
portable adj, code that compiles under more than one compiler
these opinions are mine, all mine; HP might not want them anyway...
feel free to post, OR email to raj in cup.hp.com but NOT BOTH...