P4PE mobo questions

[compnewbie02]

I am ready to build my first comp, but dont know if i need a sound card for the P4PE mobo(since it have on board one).

My specs for my new comp is
1.Antec performance plus 1080 server tower with 430 antec true power
2.Asus P4PE(L) no serial ATA, tho
3.P4 2.4ghz 533fsb
4.corsair pc2700 ddr333 256mb
5.BestData Arcade FX Geforce4 ti4200 64mb
6.Lite on 16x DVDROm
7.Memorax CDRW 40-12-40
8.WD 80gb udma/100 7200rpm
9.Cheap Floppy drive


Any comment would be good? but i already bought the stuff already,

thanks

 

[Novakain]

The system looks very good on paper, although I've never heard of Mmorax or Bestdata before. I would've been tempted to spend a little more and get a Ti-4600 Video card though. As for sound, that tends to be a personal preference thing. I prefer dedicated sound cards myself, but I've heard others say the 6 chanel audio on the P4PE is pretty good. Try it out for yourself and see how it goes. If you don't like it, you can always get a sound card later.

 

[halkebul]

Greetings. I would spend the extra money to get a Lite-On CD-Burner and a Ti 4200 with 128MB of graphics memory.

<i>It's your world kid!!!</i>

 

[compnewbie02]

I have finished building the comp and everything works fine except one thing when

when the comp starts and reads the bios i alwasy have a hardware monitor problem because my corevoltage for the +12v is not over 12 but around 11.9. is there anything wrong with it?

its getting anoying everytime i turn on the comp and have to see this message and have to press f1 to countinue.

some help will be nice thankyou

 

[halkebul]

when the comp starts and reads the bios i alwasy have a hardware monitor problem because my corevoltage for the +12v is not over 12 but around 11.9. is there anything wrong with it?

its getting anoying everytime i turn on the comp and have to see this message and have to press f1 to countinue.

There may be a way to disable this in the BIOS. Try disabling the Hardware monitor.

<i>It's your world kid!!!</i>