Tom's Hardware > Forum > Motherboards & Memory > General Motherboard > New Motherboard - Please Help!

New Motherboard - Please Help!

Forum Motherboards & Memory : General Motherboard - New Motherboard - Please Help!

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Ask the community Add a reply

Bottom Search this thread

I recently installed new motherboard XFX P4XE-MVB along with Celeron 2.0 and 512 DDR PC-2100.

I finally got it running for a couple of days after installing new hard drive but now I am having problems.

The computer starts rebooting itself while running programs. I was running TmpGen encoding an .avi file when this happens. Also, when I am running Sonic MyDVD!

Please Help!

Bob

Add a reply

I just checked my CPU Temp was 73 C

Fan Speed 2,518 RPM
VCore (V) 1.45v
Vcc3 (v) 3.29v
+5 v 4.94
+12v 11.43
-12v -12.03v
Vbat (v) 3.08v
5vsb (v) 5.45v

I am not sure what these readings mean?

Bob

Reply to bad1550

It means your CPU temp was too high. Open the case and check if the CPU fan is working. Also check if the CPU and HSF are installed properly.

Running encoding programs will put a heavier load on CPU which results in higher temp. Hence proper cooling of the system is a must.

Reply to elzt

Ask the community Add a reply

Tom's Hardware > Forum > Motherboards & Memory > General Motherboard > New Motherboard - Please Help!

Go to:

Help |
Forum rules

There are 1286 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.459 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel

Focus On

New Motherboard - Please Help!

Forum Motherboards & Memory : General Motherboard - New Motherboard - Please Help!

Please mind