PC2-6400, and getting 2.1v
Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
More related threads to : PC2-6400, and getting 2.1v
(11/18/2009) Getting a new motherboar.(10/25/2009) I keep getting a no signal messsage its only after recently installing some more
(10/21/2009) Can i use 1x2GB DDR pc2-6400 with 1x1GB DDR pc2-5300(10/20/2009) Chassis jumper disable still getting chassis intrusion
(09/24/2009) Getting 8GB DDR2 but wich set?(09/20/2009) Getting the right RAM for the right price.
(09/18/2009) Does my MOBO exploit the full potential of the CPU i'm getting?(09/05/2009) System Getting Restarted Automatically
(09/04/2009) Help getting computer working again(08/19/2009) 1.8v or 2.1v...HELP
(08/17/2009) GSKILL 4GB (2x2GB) 1066 5-5-5-15 @ 2.1V Memory Problems(07/31/2009) Not getting Press any key to boot from CD or DVD screen....
(07/29/2009) Getting blue screen when 2 ram chips in?(10/03/2009) Asus P6T Northbridge getting hot!
(06/10/2009) Can OCZ Reaper 2.1V memory run on 1.8V?(06/01/2009) Getting 1600 ram up to 1600 from 1066?
(06/04/2009) Voltage: 1.8v vs 2.1v(04/08/2009) Rampage Extreme - getting FSB:DRAM ratio 1:1 and clocked to specs
(04/07/2009) Not getting the right timings with memory(06/03/2009) Trouble getting DVD to work with MS-7525
(05/03/2009) GA-E7AUM-DS2H overclocking RAM / getting better timings(03/05/2009) Problems getting Corsair to 1600 on Asus Rampage II Extreme
(02/10/2009) Ddr3 board worth getting?(01/30/2009) Patriot Viper 4-4-4-12 2.1v Viable upgrade?
(01/03/2009) My ram is reading as PC2-6400 o_0(01/02/2009) Can my Dell XPS 410 run 2.0v - 2.1v RAM
(12/24/2008) Can i Replace an HP Mobo w/o Getting a Tattoo?(09/06/2009) Getting new MB, socket 775 or 1366? Please help!
(12/13/2008) PC2-6400 with Q6600 latency issues.(12/01/2008) PC2 8500: 1.8v by default, but is 2.1v overclocked?
(12/08/2008) Corsair DDR2 - Which version to buy - 1.8V or 2.1V - Like to overclock(11/22/2008) PC2-6400 (800MHz) running at pc2-5300 (667MHz)
(11/22/2008) is it worth getting 8GB of RAM(11/16/2008) Getting memory failures and my memory is brand new.
(11/11/2008) Getting a 790i DDR3 board very soon!(11/11/2008) Getting Hot Swap to work on Gigabyte mobo
(11/08/2008) (update) Dual channel working, but why not when in slot 1 &3(10/30/2008) Getting wierd Beep on boot
(10/19/2008) DDR2 800 only getting 400 out of it? This is weird! HELP!(10/10/2008) Getting 1.536Gigz ram instead of 2
(10/13/2008) Help getting Asus to actually replace board rather then just return(09/05/2008) Why is DDR2 800Mhz 1.8V better than DDR2 1066Mhz 2.1V?
(08/25/2008) PC2-6400 recommendations (please)?(07/26/2008) getting a new system, please help.
(08/23/2008) Please help me diagnose my EP45-ds3l Memory problems (getting worse)(07/09/2009) PC2-5300 (333MHz) & PC2-6400 (400Mhz) can be combined?
(07/08/2008) Why am i getting this Bios error?(06/17/2008) 780i and Patriot Viper pc2-6400 problem
(05/28/2008) Getting errors, can't turn my PC back on, need help please!(05/22/2008) is Patriot pc6400 2.0v runnin at 2.1v ok?
(05/04/2008) need help getting into bios(05/02/2008) Getting a new 1333mhz Quad Core what speed memory should I get?
(11/25/2009) Getting optional items with MB(04/27/2008) Help with Patriot Performance PC2-6400 memorys
(05/05/2008) Updated BIOS now getting missing OS message(04/16/2008) MSI 975 platinum north bridge getting hot
(04/13/2008) DDR2-800 CAS 4 @ 2.1V vs. CAS 5 @ 1.8V(03/31/2008) DDR 2 is confusing me... PC2-6400 or PC2-8500 ?
(03/26/2008) Looking at getting more memory. Not at home. Any rec on memory? Want t(03/19/2008) pc2-6400 or pc2-5300 in Gateway MT6840
(03/04/2008) PC2-6400 800MHz 4GB (2x 2GB) 5-5-5-12(03/05/2008) System getting restarted again and again
(02/13/2008) Which do I need PC2-6400 or PC2-8000?(02/14/2008) only getting 2.5gb in vista with 4gb installed
(02/08/2008) OCZ PC2-6400 4-4-4-15 vs. PC2-8000 5-5-5 for overclock(01/25/2008) Overclocking Crucial 2x1Gb (PC2-6400) on P6N Diamond
(01/16/2008) planning on getting a p5e ws board but im an MB noob!(01/11/2008) Problems getting Windows to recognize 1 of 2 GB of ram
(01/08/2008) ga-p35-ds3 works with 2.1v?(01/13/2008) Getting a P5N-T Deluxe have questions
(05/24/2009) PC2-5300 vs. PC2-6400 benchmarks (in a C2D)?(12/14/2007) Timing: OCZ DDR2 PC2-6400 Reaper HPC Edition
(12/12/2007) Fresh Mobo...Getting Data from Old to New?(12/05/2007) Need help in getting a friend a new motherboard
(12/08/2007) System freezes/resets during bootup - getting progressively worse!(12/14/2007) OCZ PC2-6400 Plat rev2 + Corsair Dominator RAM problem
(11/29/2007) 4x1Gb or 2x2Gb PC2-6400(11/23/2007) Is my BIOS version preventing me from getting a good overclock?
(11/22/2007) Switched Cases Getting Error code 49 on mobo when trying to boot(11/13/2007) Motherboard connectors getting corroded
(11/01/2007) Please suggest me 2 x 2GB of RAM ... IP35 Pro/Q6600 ... need PC2-6400(10/21/2007) Not getting a post beep with multiple configurations, help?!
(09/28/2007) Is it worth getting 1066 RAM?(09/21/2007) Differences between 1.8v and 2.1v memory?
(09/16/2007) Getting 1Gb DDR, Worth it?(09/11/2007) I am getting the feeling I broke something
(09/08/2007) Asrock mobo settings for OCZ DDR2 PC2-6400 RAM(08/30/2007) Please help: Getting no video and no beeps from new system
(08/21/2007) PC2-6400 CAS 3 vs PC2-8500 CAS 5(08/18/2007) Need Help - asus a7n8x deluxe, getting sata to work
(06/17/2007) Getting my front sound ports to work?(06/02/2007) 4x1 gigs corsair xms2 pc2-6400
(06/01/2007) GSkill vs. Corsair PC2-6400(06/02/2007) Help with choosing best memory for the money...PC2-6400
(05/28/2007) Questions b4 getting more ram(05/18/2007) Still getting Checksum error when my power goes out!!!!
(05/11/2007) Asus P5B-E + Patriot Extreme Performance PC2-6400(04/25/2007) Is this RAM worth getting another gig?
(03/31/2007) My OCZ PC2-6400 memory listed as PC2-5300 in POST.(03/08/2007) Patriot Signature Line 1GB PC2-6400 good for DS3+E4300 ?
(02/27/2007) Memory Timing for PC2-6400 (DDR2-800) 4-4-4-12 or 5-5-5-12(02/21/2007) PC2-6400 'Elpida Chips' @ 2.0V & DS4 NB Temp
(02/10/2007) Getting latest drivers if RAM isn't compatable?(02/05/2007) Dominator XMS2 PC2-6400 DDR2-800 CAS4 will not run at CAS4
(01/31/2007) GA-965P-DQ6 getting intermittent power(12/21/2006) Getting an e6300 core2duo... which memory specs?
(02/01/2007) Worth getting M/B with both AGP and PCI-e? (If still can..?)(12/07/2006) Need Help Getting Right Ram For Specific Motherboard
(12/06/2006) I'm getting sick of prices!(11/23/2006) Getting SATA to work on AB9?
(11/22/2006) OCZ PC2-6400 5-5-5-15 and AMD Athlon 64 X2 4200+ socket AM2(11/21/2006) *UPDATED* Screw it, I'm getting the EVGA 680i...
(11/14/2006) Point to getting a 680i and waiting for an R600?(11/10/2006) Ram for OCing a core2 w/ Vdimm 2.1v max
(10/22/2006) OCZ Platinum XTC PC2-6400 Users Please Come in(09/27/2006) 1 GB PC2-6400 (PEP21G6400LL)
(09/01/2006) Vdimm 2.1v(09/07/2006) Boot Drive Order getting reset on P5W DH Delux
(08/18/2006) Need help with p5b, i'm getting no beeps or display(08/16/2006) Am I Getting to Much Motherboard For Myself?
(08/17/2006) OCZ DDR2 PC2-6400 Gold GX XTC Dual Channel and Gigabyte DQ6(07/11/2006) MSI K9N SLI Platinum w/ OCZ EL Platinum PC2-6400 RAM Problem
(07/11/2006) Getting to root of the problem(06/14/2006) Help on getting Ram Dual channel.
(05/04/2006) Is it worth considering getting more RAM?(03/14/2006) Getting a Faster Computer
(03/09/2006) -12v = -1.09v / -5v = 2.1v ???(09/12/2009) GA-K8N Pro wont boot - just getting continuous long beeps
(12/17/2005) Help with getting on line? Cant connect, new build?(03/24/2005) Getting ide 3 and 4 to work SY-P4I875P Dragon 2, Platinum ..
(01/28/2005) Getting 400Mhz speed and 800Mhz FSB(12/04/2004) Having trouble getting the PC Power on Please Help....
(07/25/2004) Only getting USB1.1 speeds on external USB2.0 drive - help..(09/09/2004) Problem Getting Drivers For Gigabyte
(07/09/2004) Gigabyte GA-7N400 Pro...............getting started(06/13/2004) Getting suspend to ram to work on an Epox 8RGA+
(04/20/2004) Getting right processor speed on K7S6A(03/10/2005) getting readyto install my p4c800
(02/22/2005) P4B533-E - getting a warning when second monitor connected(01/26/2005) help? getting desperate
(09/21/2004) problem getting asus pundit working(08/26/2004) HELP needed: Getting stalled shutdown with A7N8X-E Deluxe ..
(08/26/2004) ASUS Radeon 9600XT ATI driver stops Windows XP Pro getting..(06/14/2004) Getting a single SATA drive to act as boot device on A7V60..
(06/01/2004) Getting a P4P800 Repaired - UK(06/25/2004) Athlon getting too hot?
(09/19/2005) Need help getting older infrared (IRDA) working(12/17/2001) Trouble getting Epox 8KHA+ to boot
(12/07/2001) Dude, you're getting a Dell!(06/22/2001) I am getting desparate: Blue Screen of Death Prob.
(05/12/2001) Getting response from MSI?(03/09/2001) getting az11e to run 133fsb..need help
(02/16/2001) Why is VIA getting away with this?(01/16/2001) Chipsets, are they getting better?
(03/05/2005) motherboard/case and getting USB ports to work(07/26/2004) Problem getting onboard sound to work.
(02/16/2004) wtf? new hd already getting bad cluster?(02/10/2004) Trouble getting to 166FSB
(08/17/2003) Getting new mobo/processor need help.(06/28/2003) New system is getting very HOT.. NEED HELP!!!
(06/18/2003) Getting into Sony bios?(05/24/2003) Getting a new Computer soon?
(03/01/2003) Getting new hard drive...(01/30/2003) Asus A7V333 + Radeon8500 getting vertical lines
(01/11/2003) getting hands on 655?(12/20/2002) Getting into BIOS
(12/03/2002) Need advice on getting a new AMD system(11/22/2002) Need serious help for getting a Motherboard
(11/22/2002) Getting a new system..need some advice(08/29/2002) Help getting a motherboard
(07/05/2002) Worth getting a 333 motherboard??(04/15/2002) Thinking of getting a Nvidia Nforce chipset
(04/08/2002) MSI getting serious about overclocking!(04/02/2002) some help on getting start with ABIT TH7II-Raid
(03/10/2002) I plan on getting the Asus 415 D Nforce w/o sound(02/07/2002) Worth getting an Iwill XP333 mobo w/ PC2100 RAM?
(01/16/2002) Mouse is not getting detected by intellipoint 4.0(10/09/2005) How do I add RAM in DELL system without getting Ri
(02/26/2005) Dual Channel trouble(getting wrong mem speeds)(01/21/2005) Overclocking and getting the right RAM
(12/17/2004) Is it worth getting PC3200?(12/03/2004) What are you getting for the money????
(07/28/2003) Getting RDRAM to 800Mhz.(06/18/2003) Corsair 3200LL getting bad rap?
(04/23/2003) CL getting less important?(07/24/2002) Getting the most out of my DDR
(06/12/2002) Getting 2*256MB more, a little inquiry(03/25/2002) not getting full RAM bandwidth - please help!
(01/05/2002) Getting more RDRAM... what to buy?(12/25/2001) i'm getting 4 GB of DDR


Sponsored links
  • Ask the community now
  • Publish
Ad