what slots do i put this in on the power supply

[gokitty199]

i have a modxstream pro 600W psu and have a gtx 670 and it says for the card i need a minimum of 30 amps on the +12 volt rail. which slot is that? i dont understand the wrighting in red

 

[bigshootr8]

Oh you are looking at the modular portion of your power supply. The cables you use you would use to power your card would be the 6+2 PCI-E Cables and normally on the cable itself it has PCI-E labeled on it so you don't end up using your motherboards ATX power connection. The Red markings on your power supply I would check with your power supply manual because they may be a particular output.

 

[Kari]

oh you've opened another thread... Did you contact ocz about those cables? What did they say?

edit this was the earlier thread if someone is interested
http://www.tomshardware.co.uk/forum/397099-33-need-cables-graphics-card

 

[bigshootr8]

Based on the manual for the graphics card the red oriented cables are for your pci-express connectors. That is why you feel like you do not have enough cables.
http://www.ocztechnology.com/res/manuals/OCZMXSP500-700.pdf

If you look at that the only cables that require 8 pin connections into your power supply are the red colored modular points. So plus in the cables that came with your power supply and they should read PCI-E and plug them in and you are good to go.