gskill support :
You can run a stress test like HyperPi or Prime95 to see if the system will be stable under max load. That is the ultimate test to determine whether the RAM and settings are good.
Thank you
GSKILL SUPPORT
Prime 95 said I got a Fatal Error:Rounding was 0.5 expected less than 0.4. This is on worker 2.
Set it back to 8-8-8-24 @ 1.601v. I'm testing this now to check for issues.
update
2 errors at 8-8-8-24 @ 1.601v in memtest
both say 8 2 00136cee224 - 4972.9mb a5f7c421 a577c421 00800000 One says count 1 and the other says count 2.
Do you have any ideas??
update 3/22
9 9 9 24 1.507v is running good 7hrs of memtest and 7hrs of prime95, had no errors.