No boot, DRAM light is lit!

[Adrian Rabben]

I've just built my first build, and I need some help.
I don't get any image (or signal) at all!

I have the following component:

Motherboard: Asus P9X79 Deluxe
Cpu: Intel I7 3930K
GPU: Geforce GTX Titan
RAM: 4x4GB Kingston Beast 2400mhz
PSU: NZXT 750w gold
CPU Cooler: Corsair H110
Chasis: CM Stryker

When I turn my computer on the DRAM kight is lit, and is stable (always on). I also get the error code 0C.

What I've tried so far:

- To push the memOk button
- Clear cmos
- Taken the mb battery in and out
- Made sure that all the RAM sticks are in
- I've also tried to use other lower frequency ram
- Tried with only one RAM stick (both 2400mhz stick and 1600mhz stick)
- Made sure all connections are correct

Please help me!

 

[TenPc]

"both 2400mhz stick and 1600mhz stick" What do you mean by that? You can't mix'n'match your ram (well, you can but it's not the best way to get a good ram response). Mixed ram reverts to the lower mhz. Best to only use the ram that all the modules are the same mhz.

KINGSTON KHX2400C11D3K4/8GX 8GB ( 4x 2GB ) SS as shown in the QVL list.
Kingston has stated that your ram is suited to the X79 motherboard.
http://www.kingston.com/us/memory/hyperx/predator/beast