Hello. I am brand new to PC gaming and building and i just want to make sure all of these parts will fit and work with each other. Also if you think there is a good upgrade for around the same price please tell me. These are parts that have all been recommended.
Case- Rosewill ARMOR-EVO Gaming E-ATX Mid Tower Computer Case, support up to E-ATX, come with Six Fans-2x Front Red LED 120mm Fan, 2x Top 120mm Fan, 1x Side 230mm Fan, 1x Rear 120mm Fan
CPU- AMD FX-6300 Vishera 3.5GHz (4.1GHz Turbo) Socket AM3+ 95W Six-Core Desktop Processor FD6300WMHKBOX
GPU- XFX Double D FX-785A-CDFC Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card
Motherboard- GIGABYTE GA-78LMT-USB3 Socket AM3+/ AMD 760G/ DDR3/ USB3.0/ A&GbE/ MicroATX Motherboard
Power- CORSAIR Builder Series CX600 600W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
RAM- CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ8GX3M2A1600C9B
Hard Drive- Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive - WD5000AAKX
Also would i need thermal paste? Some tutorials use it and some don't. Thanks.
Case- Rosewill ARMOR-EVO Gaming E-ATX Mid Tower Computer Case, support up to E-ATX, come with Six Fans-2x Front Red LED 120mm Fan, 2x Top 120mm Fan, 1x Side 230mm Fan, 1x Rear 120mm Fan
CPU- AMD FX-6300 Vishera 3.5GHz (4.1GHz Turbo) Socket AM3+ 95W Six-Core Desktop Processor FD6300WMHKBOX
GPU- XFX Double D FX-785A-CDFC Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card
Motherboard- GIGABYTE GA-78LMT-USB3 Socket AM3+/ AMD 760G/ DDR3/ USB3.0/ A&GbE/ MicroATX Motherboard
Power- CORSAIR Builder Series CX600 600W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
RAM- CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ8GX3M2A1600C9B
Hard Drive- Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive - WD5000AAKX
Also would i need thermal paste? Some tutorials use it and some don't. Thanks.