Sign in with
Sign up | Sign in
Your question

Is Kingston KVR13N9S8/4 compatible with ECS G41T-R3?

Tags:
  • Kingston
  • ECS
  • Compatibility
  • Motherboards
  • Memory
Last response: in Memory
Share
May 28, 2013 10:53:26 PM

Is Kingston KVR13N9S8/4 compatible with ECS G41T-R3? If yes, please tell me how to make it work on my ECS G41T-R3.. Because when I install it on my motherboard it does not work / does not boot or just a blank screen.

If it is not compatible can you suggest a Kingston memory that is compatible with mother board. Thanks.

More about : kingston kvr13n9s8 compatible ecs g41t

a c 576 V Motherboard
a c 89 } Memory
May 29, 2013 8:36:43 AM

From the manaul page 14 "Due to the chipset spec, this motherboard runs at DDR3 1066/800 MHz
memory speed." That means the RAM speed over 1066MHz will be OC. And look like the OC don't work because the your PC don't boot.

So now you need do the following.
1) Download the manual. http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail...
2) Do to page 9, for how to clear the CMOS. You need unplug the power core too.
3) start the PC, press the "Del" key to enter the BIOS.
4) Follow the instruction on page 32, set the "DRAM Frequency" to 1066MHz.
5) Save and exit the bios, start the PC to see it can boot up or not. It should work because the RAM can backward to 1066MHz.
6) If the PC still can't boot then you need return the RAM buy the other set 1066MHz RAM.
May 29, 2013 7:22:05 PM

cin19 said:
From the manaul page 14 "Due to the chipset spec, this motherboard runs at DDR3 1066/800 MHz
memory speed." That means the RAM speed over 1066MHz will be OC. And look like the OC don't work because the your PC don't boot.

So now you need do the following.
1) Download the manual. http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail...
2) Do to page 9, for how to clear the CMOS. You need unplug the power core too.
3) start the PC, press the "Del" key to enter the BIOS.
4) Follow the instruction on page 32, set the "DRAM Frequency" to 1066MHz.
5) Save and exit the bios, start the PC to see it can boot up or not. It should work because the RAM can backward to 1066MHz.
6) If the PC still can't boot then you need return the RAM buy the other set 1066MHz RAM.


I tried the solution you have shared but the pc still fails to boot. Still blank screen trying to boot so I can't go to the bios after clearing the CMOS then rebooting the pc with KVR13N9S8/4 memory has been installed. I only boot or to the bios using my old 2 GB DDR3 memory card. But thanks for the help anyway. Will try to buy a new set of memory and will look for this KVR1333D3N9 since the manual recommends this..

I would like to if you know if Asus NVIDIA GT620 1GB or Inno3D NVIDIA GeForce GT220 1GB would run on my motherboard ECS G41T-R3?
Related resources
a c 576 V Motherboard
a c 89 } Memory
May 29, 2013 9:10:32 PM

Yes, both of them will fit well with the MB as long as you have a 300W PSU, because the MB has pciex16 slot.

Also keep in mind that the GT620 is the rebranded GT430, which is almost as same as GT220 (DDR3), you can see that they are the lower power for the game in the Graphics Card Hierarchy Chart. But if you don't use it for game then you should be fine.
http://www.tomshardware.com/reviews/gaming-graphics-car...

May 29, 2013 9:20:53 PM

Thanks cin19... Will try to buy one of them... Well I like games but does not play much I mean I am not a hard core gamer. I just like to play games and those cards are in my budget range not like the other graphics cards are too much for me..
!