No Display after updating/downgrading Nvidia drivers

[ecwoodrow]

Last night I decided to update my nvidia drivers to 320.18. Afterwards I started experiencing problems with the display driver crashing so I downgraded back to 314.07(?). That worked for a while, until this morning when I started experiencing the display driver crashing again. So thinking some bits of 320.18 were left over I decided to try doing a clean install of the drivers, which didn't solve the problem and then caused the drivers to crash for good. I restarted the computer, but now there is no display at all.

I think it's worth noting that I'm no longer getting a bios screen nor any post beeps either.

 

[lonewolf7]

Are the fans spinning ? Do the MB have light (led) ? Check your PSU.

 

[ecwoodrow]

Are the fans spinning ? Do the MB have light (led) ? Check your PSU.

Yeah, all the fans and leds are going. The hardrive and peripherals are working too, just not getting a display.

 

[lonewolf7]

Mainly display is related to RAM and GPU. Did you check your PSU ? If you have an onboard video port available on your MB than check with it. Else
pull out all the RAM sticks, put one stick at a time see if it works. Lastly pull out your GPU and reseat it. Good luck.