System Overheating what to do ?

[Hase3b]

My current setting:-
MOTHERBOARD:
FAN 1 CURRENT 1098 RPM MAX 1099 RPM
FAN 2 CURRENT 911 RPM MAX 920 RPM

CPU:
Core i5 650:-

CPU CORE #1 CURRENT 34C MAX:-43C
CPU CORE #2 CURRENT 35C MAX:-40C

GPU:
GPU CORE CURRENT 60.5C MAX:-61C
.
.
My gpu is heating up too much and when I play game sometime pc shutdown to prevent further damage what to do make it cooler and is my cpu on idle heat?

 

[bloodlover]

Clean the dust for your PC.

 

[Hase3b]

I already cleaned out whole system,while playing games the gpu even goes to 82c

 

[tiny voices]

Take the GPU out and make sure the dust is cleaned out from the inside of the heatsink.

What GPU are you using?

Your cause sounds a bit warm. What orientation do you have your fans in?

 

[p4nz3rm4d]

try applying a new layer of thermal paste

 

[Hase3b]

Take the GPU out and make sure the dust is cleaned out from the inside of the heatsink.

What GPU are you using?

Your cause sounds a bit warm. What orientation do you have your fans in?

while I am going to clean gpu while last time I open cpu the motherboard and ram both seemed a little bit warm while the card was burning as hell!

 

[Hase3b]

Hi there is another problem that i can not remove my gpu beacause it has no screw it is ati radeon 4800 series an it is pluged in it slot frimly

 

[Hase3b]

Take the GPU out and make sure the dust is cleaned out from the inside of the heatsink.

What GPU are you using?

Your cause sounds a bit warm. What orientation do you have your fans in?

cleaned out whole system but fan has started making some weird noise,and even monitor is saying no input signal what to do ?while the GPU fan is spinning and card is working properly,is this normal that fan start making noise after changing thermal tapes?

 

[goblues39]

Are you using AMD Catalyst Control Center to control the fan? What kind of noise is it making? HD4850/4870's run very hot and should not be shutting your system down at 61C. Is it a reference cooler?

 

[Hase3b]

Are you using AMD Catalyst Control Center to control the fan? What kind of noise is it making? HD4850/4870's run very hot and should not be shutting your system down at 61C. Is it a reference cooler?

yeah I am using AMD catalyst to control fan,Its shutting down the system at 82C and my vga cable and connector both are not working after cleaning the system so I have ordered a new vga cable and connector and then will see what happen,while fan noise is now slowly becoming low.
I heard a lot this on every tech page that can we use toothpaste instead of thermal tape as both equal in its functions?

I have changed my vga connector four times and cable two times,they always stop working in some days,Is this due to heat?

 

[p4nz3rm4d]

Using toothpaste is NOT an alternate to thermal paste.

 

[Hase3b]

Using toothpaste is NOT an alternate to thermal paste.

I have applied new thermal paste while suddenly my processor and gpu both heating up but not on high is this normal?

 

[p4nz3rm4d]

Using toothpaste is NOT an alternate to thermal paste.

I have applied new thermal paste while suddenly my processor and gpu both heating up but not on high is this normal?

No it isnt. make sure you have applied it correctly and that the heatsinks are both secured properly

 

[tiny voices]

https://www.youtube.com/watch?v=-hNgFNH7zhQ You did it like this correct? With thermal paste, not toothpaste?

 

[Hase3b]

https://www.youtube.com/watch?v=-hNgFNH7zhQ You did it like this correct? With thermal paste, not toothpaste?

Screen has changed color and computer is crashing while card is is hot than normal 80C,what to do while there is no fan available for radeon hd 4800

 

[tiny voices]

I don't understand what you are saying? Is your fan not spinning? Did you apply the thermal paste like in the video?

 

[Hase3b]

I don't understand what you are saying? Is your fan not spinning? Did you apply the thermal paste like in the video?

the fan is spinning,my thermal paste is white in color and I applied the thermal paste on other part also because when I open up the card the old thermal past was applied to many place,do i need remove from other parts?

 

[tiny voices]

You have to remove the old paste. The new paste should not be white. Buy some proper thermal paste and correctly re-paste the card.

 

[Hase3b]

cleaned out whole card again and there are line on my screen or sometime the whole screen is shattered

 

[Hase3b]

going to visit a tech expert because there are several line on screen and the whole card is screwed

 

[goblues39]

Your card, if it is a 4850 or 4870 should not be shutting the system down, or even show pixelated screens at 82 degrees. I believe the max safe temp for those cards is over 100. Do you have the proper power connection to the card from the power supply?
I don't think we are going to be able to help you here, you need to get it serviced at a shop. Or maybe borrow a friends graphics card and see how it works in your system.

 

[Hase3b]

Your card, if it is a 4850 or 4870 should not be shutting the system down, or even show pixelated screens at 82 degrees. I believe the max safe temp for those cards is over 100. Do you have the proper power connection to the card from the power supply?
I don't think we are going to be able to help you here, you need to get it serviced at a shop. Or maybe borrow a friends graphics card and see how it works in your system.

Today I visited a local tech center for repairing my card,and figured out that the ic unit of card was crashed(burned),so they said its hard to repair 4890 1gb because its isn't easily available and its warranty has even completed,so decided to replace the card(if repaired)with nvidia 560.
Can you please tell which one is good radeon 4890 1gb or nvidia 560 1 gb ?

 

[tiny voices]

The 560 is decently better.

 

[Hase3b]

The 560 is decently better.

hey switched to amd hd 7850 ,while playing games like ashes 2009 on ultra setting card goes 60C maximum while normal card goes 49C,so is it normal temperature while gaming ?

 

[p4nz3rm4d]

those temps are fine.